<div dir="ltr">I've patched safeloader tools to support EU version of this rouer, and the flashed a trunk image, after flashing that, i get a kernel panic related to interrupts at boot , and the bootloader is unuseable,<br><br>TFTP recovery fails always with incorrect file both with official and openwrt images<br><br>Trying to access the console results in safeloader asking a password which is not admin<br><br><div>TP-LINK SafeLoader (Build time: Jun 12 2015 - 09:49:53)</div><div>CPU: 560MHz AHB: 225MHz DDR: 64MB</div><div>Performing LED check..  PASS</div><div>Press CTRL+B to enter SafeLoader: 1</div><div>Flash Manufacturer: Unknown(0xc8)</div><div>Flash Device ID: Unknown(0x4017)</div><div>Data flash init failed.</div><div>open user-config failed.</div><div>open user-config failed.</div><div><br></div><div>Input Password: **</div><div><br>Any ideas? <br>I've found a dump posted on some deutsch forum <a href="http://www0.xup.in/exec/xddl.php?fid=20339772&fname=cpe210-flash.7z&uid=0&key=">http://www0.xup.in/exec/xddl.php?fid=20339772&fname=cpe210-flash.7z&uid=0&key=</a><br> </div><div>it is for cpe210 , but i can't find a way to decrypt the bootloader and find out which is the password<br><br><br></div></div>