[OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images

Bastian Bittorf bittorf at bluebottle.com
Thu Jan 14 13:00:24 EST 2016


* Daniel Dickinson <openwrt at daniel.thecshore.com> [14.01.2016 17:35]:
> If on trunk, what compile options do use to make the images build
> successfully?  I get failed compiles with warning that the image is
> too big on any brcm47xx target I tried, so unless wl-500gp is bigger
> than most of them, I'm thinking you're either doing something
> special, or are not on trunk.  (And I tried cutting *way* back on
> things that increase image, well below normal OpenWrt).

with r48235 i just built 2 images, one fat:
5.050.368 openwrt-brcm47xx-legacy-asus-wl-500gp-v1-squashfs.trx

and one smaller with some thing disabled:
3.346.432 openwrt-brcm47xx-legacy-squashfs.trx

both are working...

bye, bastian
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel



More information about the openwrt-devel mailing list