[OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images

[Daniel Dickinson]

If on trunk, what compile options do use to make the images build 
successfully?  I get failed compiles with warning that the image is too 
big on any brcm47xx target I tried, so unless wl-500gp is bigger than 
most of them, I'm thinking you're either doing something special, or are 
not on trunk.  (And I tried cutting *way* back on things that increase 
image, well below normal OpenWrt).

Regards,

Daniel

On 14/01/16 10:59 AM, Roman Yeryomin wrote:
> On 14 January 2016 at 17:31,  <openwrt at daniel.thecshore.com> wrote:
>> From: Daniel Dickinson <openwrt at daniel.thecshore.com>
>>
>> To my knowledge there are no working images, nor a way to get them,
>> even using maximum stripping and dropping of packages, kmods, and
>> compile options due to the small size of the targets for this
>> architecture.  Therefore mark this arch broken and maybe remove
>> unless someone decides to fix it.
>>
>> Signed-off-by: Daniel Dickinson <openwrt at daniel.thecshore.com>
>> ---
>>   target/linux/brcm47xx/Makefile | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/target/linux/brcm47xx/Makefile b/target/linux/brcm47xx/Makefile
>> index e0c44c8..fae1f59 100644
>> --- a/target/linux/brcm47xx/Makefile
>> +++ b/target/linux/brcm47xx/Makefile
>> @@ -12,6 +12,7 @@ BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
>>   FEATURES:=squashfs usb
>>   SUBTARGETS:=generic mips74k legacy
>>   MAINTAINER:=Hauke Mehrtens <hauke at hauke-m.de>
>> +DEPENDS:=@BROKEN
>>
>>   KERNEL_PATCHVER:=4.1
>>
>
> m? at least Asus rt-n16 and wl-500gp work fine!
>
> Regards,
> Roman
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel