[OpenWrt-Devel] ZyXEL NBG4615

[John Crispin]

On 19/09/2015 11:27, Nerijus Baliunas wrote:
> Hello,
> 
> it is similar to NBG-419N but has Atheros AR8316 4+1 GbE switch. I enabled
> CONFIG_AR8216_PHY=y in target/linux/ramips/rt305x/config-3.18, rebuilt and
> loaded openwrt-ramips-rt305x-nbg-419n-initramfs-uImage.bin to SDRAM via TFTP. 
> 
> Now /sys/bus/mdio_bus/drivers/Atheros AR8216!AR8236!AR8/ exists, but
> # swconfig list
> Found: switch0 - rt305x
> 
> How can I make switch work?
> 
> I found similar problem https://forum.openwrt.org/viewtopic.php?id=49276
> 
> Regards,
> Nerijus

Hi

rt305x has a rgmii that the switch connects to. however we dont have
support in the driver for that rgmii port. you will need to first atch
the driver to support the rgmii interface and then hook up the switch
driver.

	John


> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> 
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel