[OpenWrt-Devel] ZyXEL NBG4615

[Nerijus Baliunas]

Hello,

it is similar to NBG-419N but has Atheros AR8316 4+1 GbE switch. I enabled
CONFIG_AR8216_PHY=y in target/linux/ramips/rt305x/config-3.18, rebuilt and
loaded openwrt-ramips-rt305x-nbg-419n-initramfs-uImage.bin to SDRAM via TFTP. 

Now /sys/bus/mdio_bus/drivers/Atheros AR8216!AR8236!AR8/ exists, but
# swconfig list
Found: switch0 - rt305x

How can I make switch work?

I found similar problem https://forum.openwrt.org/viewtopic.php?id=49276

Regards,
Nerijus
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel