[VOTE] Endorse the creation of OpenWrt One

Matthias Schiffer mschiffer at universe-factory.net
Wed Jan 24 13:03:01 PST 2024


On 17/01/2024 16:25, John Crispin wrote:
> OpenWrt One will be a wireless networking device designed for free and open 
> source software enthusiasts, encouraging people to tinker with and learn 
> about embedded development and Linux networking.
> 
> OpenWrt One is intended to benefit OpenWrt as the project shall receive a 
> share of the revenue for each unit sold.
> 
> Our intent is to build a unit with OpenWrt friendly hardware specifications 
> which makes it well supportable and serves as a potential role model for 
> manufacturers - it will receive the same level of community support as 
> other OpenWrt capable devices, there will be no priority tier, no paid 
> support channels and no dedicated OpenWrt flavours or similar. The device 
> support shall be fully upstreamed into vanilla OpenWrt.
> 
> OpenWrt One is a private voluntary initiative led by me (John Crispin). The 
> initial R&D cost for the ODM design is privately paid for by me, without 
> utilising any OpenWrt funds. I will not be making any profit from this. To 
> reduce liabilities, time to market and burden on individual developers or 
> the project as a whole, I propose to co-develop the OpenWrt One PCB 
> together with the ODM behind the Banana Pi community. The OpenWrt One will 
> reuse design aspects as well as the form factor of existing Banana Pi PCBs 
> and enclosures.
> 
> 
>   OpenWrt One is *not* intended to be:
>    - A contender for commercial off-the-shelf Routers or APs.
>    - A wired router achieving gigabit NAT speeds
>    - A bleeding edge Wi-Fi 6e/7 access point
>    - A Network Attached Storage device
>    - A high speed ethernet switch
> 
> The "One" rather aims to be:
>    - As open as possible and fully compliant with all copyleft and other 
> FOSS licenses it uses
>    - An educational platform for tinkering with/learning about open 
> hardware and Linux
>    - A way to donate to the OpenWrt project while receiving a nice gadget 
> in return
>    - Provide expansibility through mikroBUS, GPIOs and PCI/e M.2
>    - Software unbrickable and easily recoverable without additional means
>    - The satisfaction of achieving an overdue personal objective
> 
> 
> By starting this vote, I am asking fellow developers of the OpenWrt project 
> to:
>    a) Endorse the usage and mention of the OpenWrt trademark and logo for 
> the OpenWrt One hardware device, allowing the ODM to print the OpenWrt logo 
> on the silk screen and enclosures as well as branding the resulting device 
> "OpenWrt One" and marketing it as such. Software Freedom Conservancy (SFC) 
> agreed to take care of the legal agreement with the ODM if the vote succeeds.
>    b) Authorise SFC, Inc. to register an IEEE MAC Address Block Large 
> (MA-L) on behalf of OpenWrt. The required one-time payment will be covered 
> by private, non-project funds.
>    c) Agree that SFC will receive a percentage of the revenue of each unit 
> sold by the ODM, on behalf of OpenWrt with the received funds being 
> directed towards the OpenWrt project under the existing fiscal agreement in 
> order to cover future expenses. Right now I am aiming for a share of around 
> 10% with an expected price tag of around 100$ per unit.
> 
> 
> The vote shall be concluded within 10 days.
> 
> In case the vote succeeds, the next steps will be:
>   - Finalise the hardware design with the silicon vendor (MediaTek) and ODM 
> (Banana Pi) - expected to take 4-8 weeks
>   - Receive engineering samples (15 units) and distribute them to 
> interested parties
>   - Provide samples to SFC for copyleft/FOSS license compliance verification.
>   - Once the engineering samples are confirmed to be working, the ODM will 
> start producing the initial batch of units
> 
> Please understand that until the vote succeeds I do not have the 
> mandate/authority to further any discussions with the involved entities on 
> behalf of OpenWrt. Final technical and legal details will be clarified once 
> the consent is given through this vote.
> 
>      John

A nice project! +1

Best regards,
Matthias
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature.asc
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <http://lists.openwrt.org/pipermail/openwrt-adm/attachments/20240124/0a177fec/attachment.sig>


More information about the openwrt-adm mailing list