getaddrinfo failed: Servname not supported for ai_socktype

[Matthew Kitchin (public/usenet)]

  On 8/7/2010 10:49 AM, David Woodhouse wrote:
>
> It looks like the routes are all set up according to your VPN server's
> configuration. You aren't routing *everything* to the VPN; only three
> "Class B" subnets -- 10.85.0.0/16, 10.92.0.0/16 and 172.27.0.0/16. You
> seem to have DNS set up properly to point to the VPN too.
>
> What makes you say it isn't working? What have you tried?
>
> If you run 'tcpdump -i tun0 -l -n -s 1500' do you see traffic on the
> VPN? From your log it looks like you're sending packets but never
> getting anything back.
>
>  From another machine on the internal network, can you ping your VPN IP
> address? Do you see incoming packets then?
>
Correct. We are only routing a few subnets.
I tried to ping and telnet to a server on the 10.85.0.x network.
I'll have to get some info from our network engineer so I can access the 
actual ASA box?
tcpdump is below. If I'm reading it correctly, it shows no return traffic.

I can ping my VPN IP from a PC on the 10.92.0.0 segment.
C:\Users\mkitchin>ping 10.70.6.102
Pinging 10.70.6.102 with 32 bytes of data:
Reply from 10.70.6.102: bytes=32 time=41ms TTL=63

AND Never mind.....
I can ping something on the 10.92.X.X segment. That works! I just can't 
ping anything on the the 10.85.0.X segment. That could very well be 
something on our end.
I am up and running though! I will start putting it through some stress 
tests to see if I can get better results that the workaround we had to 
do with VPNC. If I can, I will then beg for help with the OpenWRT part. 
If I could get a tar of the directory (definitely including the 
makefile!) that was used to compile the existing version in OpenWRT, I'm 
pretty sure I could work with that to make a newer package.

[root at VM-MKLinux ~]# tcpdump -i tun0 -l -n -s 1500
tcpdump: WARNING: arptype 65534 not supported by libpcap - falling back 
to cooke                                       d socket
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on tun0, link-type LINUX_SLL (Linux cooked), capture size 1500 
bytes
12:37:14.830886 IP 10.70.6.102.45755 > 10.85.0.11.domain:  54649+ AAAA? 
mirrors.                                       arsc.edu. (34)
12:37:14.909903 IP 10.70.6.102 > 10.85.0.10: ICMP echo request, id 
47403, seq 4,                                        length 64
12:37:15.909625 IP 10.70.6.102 > 10.85.0.10: ICMP echo request, id 
47403, seq 5,                                        length 64
12:37:16.910638 IP 10.70.6.102 > 10.85.0.10: ICMP echo request, id 
47403, seq 6,                                        length 64
12:37:17.910379 IP 10.70.6.102 > 10.85.0.10: ICMP echo request, id 
47403, seq 7,                                        length 64
12:37:18.910228 IP 10.70.6.102 > 10.85.0.10: ICMP echo request, id 
47403, seq 8,                                        length 64
12:37:19.831129 IP 10.70.6.102.57366 > 10.85.0.10.domain:  29428+ AAAA? 
mirrors.                                       arsc.edu.unix. (39)