[PATCH] arc: arcv2: cache: Explicitly set MSB counterpart of region ops addresses

Alexey Brodkin Alexey.Brodkin at synopsys.com
Wed Aug 2 01:03:57 PDT 2017


Hi Vineet,

On Wed, 2017-08-02 at 09:09 +0530, Vineet Gupta wrote:
> On 08/01/2017 03:29 PM, Alexey Brodkin wrote:
> > 
> > It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1
> > which hold MSB bits of the physical address correspondingly of region start
> > and end otherwise SLC region operation is executed in unpredictable manner,
> > for example on HSDK platform where PAE40 support exists in hardware
> > we saw each and every SLC region op to take seconds (sic!).
> > 
> > Signed-off-by: Alexey Brodkin <abrodkin at synopsys.com>
> > Reported-by: Vladimir Kondratiev <vladimir.kondratiev at intel.com>
> > ---
> >   arch/arc/include/asm/cache.h | 2 ++
> >   arch/arc/mm/cache.c          | 8 ++++++--
> >   2 files changed, 8 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
> > index 35127ad95124..1f3c2f967471 100644
> > --- a/arch/arc/include/asm/cache.h
> > +++ b/arch/arc/include/asm/cache.h
> > @@ -91,7 +91,9 @@ extern unsigned long perip_base, perip_end;
> >   #define ARC_REG_SLC_FLUSH	0x904
> >   #define ARC_REG_SLC_INVALIDATE	0x905
> >   #define ARC_REG_SLC_RGN_START	0x914
> > +#define ARC_REG_SLC_RGN_START1	0x915
> >   #define ARC_REG_SLC_RGN_END	0x916
> > +#define ARC_REG_SLC_RGN_END1	0x917
> >   
> >   /* Bit val in SLC_CONTROL */
> >   #define SLC_CTRL_DIS		0x001
> > diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
> > index b7a1face1584..0b4e2650c5de 100644
> > --- a/arch/arc/mm/cache.c
> > +++ b/arch/arc/mm/cache.c
> > @@ -580,6 +580,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
> >   	static DEFINE_SPINLOCK(lock);
> >   	unsigned long flags;
> >   	unsigned int ctrl;
> > +	phys_addr_t end;
> >   
> >   	spin_lock_irqsave(&lock, flags);
> >   
> > @@ -609,8 +610,11 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op)
> >   	 * END needs to be setup before START (latter triggers the operation)
> >   	 * END can't be same as START, so add (l2_line_sz - 1) to sz
> >   	 */
> > -	write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1));
> > -	write_aux_reg(ARC_REG_SLC_RGN_START, paddr);
> > +	end = paddr + sz + l2_line_sz - 1;
> > +	write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end));
> > +	write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end));
> > +	write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr));
> > +	write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr));
> 
> Are these registers present even if PAE is not configured in hardware ?

Apparently no :(

I did test it on AXS103 but just now realized its latest firmware has PAE40.
Retested on older firmware (still with HS 2.1) without PAE and indeed those
AUX registers are not implemented:
----------------------->8----------------------
ehci-platform e0040000.ehci: new USB bus registered, assigned bus number 1
Path: (null)
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc1-next-20170718-00001-g6f0be43cd25b-dirty #1
task: 9f02ba80 task.stack: 9f02c000

[ECR   ]: 0x00020000 => Illegal Insn
[EFA   ]: 0x8020bba2
[BLINK ]: slc_op+0x1a/0xac
[ERET  ]: slc_op+0x4a/0xac
[STAT32]: 0x00080802 :   K     
BTA: 0x8020bb80  SP: 0x9f02dd88  FP: 0x00000000
LPS: 0x80670da4 LPE: 0x80670db8 LPC: 0x00000000
r00: 0x00000031 r01: 0x00002000 r02: 0x9f38403f
r03: 0x00000917 r04: 0x00000031 r05: 0x9f38a5c0
r06: 0x9f0baf0d r07: 0x9f0baf0c r08: 0x00000000
r09: 0x00000000 r10: 0x00000000 r11: 0x80808080
r12: 0x8020bb72

Stack Trace:
  slc_op+0x4a/0xac
  arc_dma_alloc+0x7c/0xd8
  dma_pool_alloc+0x186/0x1d0
  ehci_qh_alloc+0x34/0xd4
  ehci_setup+0x15c/0x420
  ehci_platform_reset+0x48/0x68
  usb_add_hcd+0x186/0x624
  ehci_platform_probe+0x210/0x514
  platform_drv_probe+0x26/0x64
  really_probe+0x284/0x348
  __driver_attach+0xac/0xd4
  bus_for_each_dev+0x38/0x70
  bus_add_driver+0xc0/0x180
  driver_register+0x50/0xec
  do_one_initcall+0x32/0x118
  kernel_init_freeable+0x108/0x198
----------------------->8----------------------

So I'll respin this patch with conditional setup of those regs
depending on PAE40 presence.

-Alexey


More information about the linux-snps-arc mailing list