[PATCH] ARM: bcm2835: add device tree for Raspberry Pi model B+

Matthias Klein matthias.klein at linux.com
Wed Oct 29 02:07:59 PDT 2014

Am 29.10.2014 um 02:33 schrieb Stephen Warren:
> On 10/27/2014 06:52 PM, Matthias Klein wrote:
>> The model B and B+ differ in the GPIO lines for ACT and PWR led.
>> The PWR led on the B+ model is active low.
> This new file is almost identical to bcm2835-rpi.dts. Perhaps we can use
> some include files to share the common portions so they aren't
> duplicated. Roughly:
> * Move all the common content from bcm2835-rpi.dts into bcm2835-rpi.dtsi.
> * Update bcm2835-rpi.dts to include bcm2835-rpi.dtsi to get all the
> common parts, and add the few lines of differences.
> * Update this patch similarly.
> Does that make sense?
Yes, I will work on such a patchset.

> A couple changes to this patch and the existing bcm2835-rpi.dts might
> reduce the differences even further, leading to more common code in
> bcm2835-rpi.dtsi:
> - Add the PWR LED to bcm2835-rpi-b.dts, if appropriate.
> - Add the I2S pinmux settings for B+ too.
>> diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts
> ...
>> +&mmc {
> That label doesn't exist; it should be &sdhci. Consequently:

Sorry, I based my patch on the wrong tree. I used 
https://github.com/pietrushnic/rpi-dt-linux/tree/rpi-3.17.y which 
contains non upstream commits.

Which tree should I use in general for work on the BCM2835? Is 
linux-next the right tree?

More information about the linux-rpi-kernel mailing list