[PATCH v3 4/8] drm/rockchip: vop2: Fix the HDMI sync polarity bit order on RK3588

Arun Iyengar via B4 Relay devnull+aiyengar1990.gmail.com at kernel.org
Fri Nov 13 08:39:21 PST 2026


From: Arun Iyengar <aiyengar1990 at gmail.com>

In GRF_VO1_CON0 the HDMI vsync polarity bit comes before the hsync one
(bits 5 and 6 for HDMI0, 7 and 8 for HDMI1), but rk3588_get_hdmi_pol()
puts hsync first. Modes with mixed sync polarities go out with both
syncs inverted: the HDMI controller sees 1920x1080 at 144 +HSync -VSync
as -HSync +VSync in VIDEO_INTERFACE_STATUS0.

Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
Signed-off-by: Arun Iyengar <aiyengar1990 at gmail.com>
---
 drivers/gpu/drm/rockchip/rockchip_vop2_reg.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
index 3e654cb99ddf..6d08988d7007 100644
--- a/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
+++ b/drivers/gpu/drm/rockchip/rockchip_vop2_reg.c
@@ -1683,13 +1683,13 @@ static u32 rk3588_get_mipi_port_mux(int vp_id)
 		return 0;
 }
 
-/* The sync polarity bits in GRF_VO1_CON0 are set for a negative sync */
+/* GRF_VO1_CON0: vsync bit below the hsync bit, each set for a negative sync */
 static u32 rk3588_get_hdmi_pol(u32 polflags)
 {
 	u32 val;
 
-	val = (polflags & BIT(HSYNC_POSITIVE)) ? 0 : BIT(HSYNC_POSITIVE);
-	val |= (polflags & BIT(VSYNC_POSITIVE)) ? 0 : BIT(VSYNC_POSITIVE);
+	val = (polflags & BIT(VSYNC_POSITIVE)) ? 0 : BIT(0);
+	val |= (polflags & BIT(HSYNC_POSITIVE)) ? 0 : BIT(1);
 
 	return val;
 }

-- 
2.55.0





More information about the Linux-rockchip mailing list