[PATCH 4/5] arm64: dts: rockchip: Add DSI panel to RK3588 EVB1
Sebastian Reichel
sebastian.reichel at collabora.com
Fri Nov 6 13:57:09 PST 2026
The RK3588 EVB1 comes with a W552793DBA-V10 Touchscreen/Display
combination. It contains a Wanchanglong W552793BAA panel and a
Goodix GT1158 touchscreen. This adds the DT description of it.
Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 90 ++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 6a95a8bb6fb8..327ca13b60f0 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -204,6 +204,15 @@ vcc12v_dcin: regulator-vcc12v-dcin {
regulator-max-microvolt = <12000000>;
};
+ vcc3v3_lcd_mipi: regulator-vcc3v3-lcd-mipi {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc3v3_lcd_mipi";
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+ vin-supply = <&vcc_3v3_s0>;
+ };
+
vcc3v3_pcie30: regulator-vcc3v3-pcie30 {
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie30";
@@ -338,6 +347,43 @@ &cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
+&dsi0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ panel at 0 {
+ compatible = "wanchanglong,w552793baa", "raydium,rm67200";
+ reg = <0>;
+ backlight = <&backlight>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_rst_gpio>;
+ vdd-supply = <&vcc3v3_lcd_mipi>;
+ iovcc-supply = <&vcc3v3_lcd_mipi>;
+ vsp-supply = <&vcc5v0_sys>;
+ vsn-supply = <&vcc5v0_sys>;
+ reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_LOW>;
+
+ port {
+ mipi_panel_in: endpoint {
+ remote-endpoint = <&dsi0_out_panel>;
+ };
+ };
+ };
+};
+
+&dsi0_in {
+ dsi0_in_vp3: endpoint {
+ remote-endpoint = <&vp3_out_dsi0>;
+ };
+};
+
+&dsi0_out {
+ dsi0_out_panel: endpoint {
+ remote-endpoint = <&mipi_panel_in>;
+ };
+};
+
&gmac0 {
clock_in_out = "output";
phy-handle = <&rgmii_phy>;
@@ -495,6 +541,22 @@ hym8563: rtc at 51 {
};
};
+&i2c6 {
+ status = "okay";
+
+ gt1x: touchscreen at 14 {
+ compatible = "goodix,gt1158";
+ reg = <0x14>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+ reset-gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
+ AVDD28-supply = <&vcc3v3_lcd_mipi>;
+ VDDIO-supply = <&vcc3v3_lcd_mipi>;
+ };
+};
+
&i2c7 {
status = "okay";
@@ -543,6 +605,10 @@ rgmii_phy: ethernet-phy at 1 {
};
};
+&mipidcphy0 {
+ status = "okay";
+};
+
&pcie2x1l0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>, <&wifi_host_wake_irq>;
@@ -664,6 +730,12 @@ hym8563_int: hym8563-int {
};
};
+ mipi_dsi {
+ lcd_rst_gpio: lcd-rst {
+ rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
pcie2 {
pcie2_0_rst: pcie2-0-rst {
rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -692,6 +764,14 @@ vcc3v3_pcie30_en: vcc3v3-pcie30-en {
};
};
+ touchscreen {
+ touchscreen_pins: touchscreen-pins {
+ rockchip,pins =
+ <0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>,
+ <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
usb {
vcc5v0_host_en: vcc5v0-host-en {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -1534,3 +1614,13 @@ vp1_out_hdmi1: endpoint at ROCKCHIP_VOP2_EP_HDMI1 {
remote-endpoint = <&hdmi1_in_vp1>;
};
};
+
+&vp3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vp3_out_dsi0: endpoint at ROCKCHIP_VOP2_EP_MIPI0 {
+ reg = <ROCKCHIP_VOP2_EP_MIPI0>;
+ remote-endpoint = <&dsi0_in_vp3>;
+ };
+};
--
2.53.0
More information about the Linux-rockchip
mailing list