[PATCH 3/5] arm64: dts: rockchip: Enable HDMI sound on RK3588 EVB1

[Sebastian Reichel]

The RK3588 EVB1 supports audio on both HDMI ports, so enable it
accordingly.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 6476d9e3be6f..6a95a8bb6fb8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -379,6 +379,10 @@ hdmi0_out_con: endpoint {
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdmi1 {
 	frl-enable-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_LOW>;
 	pinctrl-0 = <&hdmim2_tx1_cec &hdmim0_tx1_hpd
@@ -399,6 +403,10 @@ hdmi1_out_con: endpoint {
 	};
 };
 
+&hdmi1_sound {
+	status = "okay";
+};
+
 &hdmi_receiver_cma {
 	status = "okay";
 };
@@ -514,6 +522,14 @@ &i2s0_sdi0
 	status = "okay";
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
 &mdio0 {
 	rgmii_phy: ethernet-phy at 1 {
 		/* RTL8211F */

-- 
2.53.0