[PATCH 1/5] arm64: dts: rockchip: Add missing PCIe wake pinmux on RK3588 EVB1

[Sebastian Reichel]

Add missing pinmux for the PCIe wake signal for the onboard LAN card.

Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
index 8969b56f3063..87e624d1e094 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts
@@ -555,7 +555,8 @@ wifi: wifi at 0,0 {
 &pcie2x1l1 {
 	reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pcie2_1_rst>, <&rtl8111_isolate>, <&pcie30x1m1_1_clkreqn>;
+	pinctrl-0 = <&pcie2_1_rst>, <&rtl8111_isolate>, <&pcie30x1m1_1_clkreqn>,
+		    <&pcie30x1m1_1_waken>;
 	supports-clkreq;
 	status = "okay";
 };

-- 
2.53.0