[PATCH v2 00/12] arm64: dts: rockchip: Add NanoPi M6 board

[Jonas Karlman]

Hi Joachim,

On 7/12/2026 8:00 PM, Joachim Eastwood wrote:
> Hi Jonas,
> 
> On Sat, 11 Jul 2026 at 01:36, Jonas Karlman <jonas at kwiboo.se> wrote:
>>
>> Hi Joachim,
>>
>> On 7/11/2026 12:11 AM, Joachim Eastwood via B4 Relay wrote:
>>> This patch series add support for the NanoPi M6. This board is very
>>> similar to the NanoPi R6C and R6S boards which are already supported.
>>>
>>> Main differences:
>>> * M.2 M-key slot with PCIe (Also present on R6C)
>>> * M.2 E-key slot with PCIe and USB (from hub)
>>> * 1 additional USB 2.0 port from an on-board USB hub
>>> * RT5616 audio CODEC
>>>
>>> Patch 2 and 3 moves a bit code around. Please let me know if those two
>>> should be squashed together.
>>> Next few patches adds some missing bits the common nanopi dtsi file.
>>> While the final patch adds support for NanoPi M6. Support for M6 has
>>> been split into two files one dtsi and one dts file. This is to make
>>> it easier to add support to the new M6V2 board at a later stage.
>>
>> In my personal opinion I think it would make more sense to sort
>> patches in following order:
>> - adding/fixing missing bits to the common nanopi-r6 dtsi
>> - extract M6/R6 common parts from nanopi-r6 dtsi to nanopi dtsi,
>>   nanopi-r6 dtsi includes the nanopi dtsi and no changes to dts files
>> - final parts that adds the M6 board
>>
>> Should probably make it a little bit easier to cherry-pick and bisect.
> 
> If the additions/missing bits needs to backported I agree.

There are consumers of DTs outside of Linux, e.g. U-Boot, that may
need/want to cherry-pick patches/fixes, so such ordering should likely
help for such use-cases.

> I'll cook up a patch set with the order you suggest. Thanks for the feedback.

Sounds good, thanks!

Regards,
Jonas

> 
> 
> best regards,
> Joachim Eastwood