[PATCH v2 00/12] arm64: dts: rockchip: Add NanoPi M6 board

[Joachim Eastwood]

Hi Jonas,

On Sat, 11 Jul 2026 at 01:36, Jonas Karlman <jonas at kwiboo.se> wrote:
>
> Hi Joachim,
>
> On 7/11/2026 12:11 AM, Joachim Eastwood via B4 Relay wrote:
> > This patch series add support for the NanoPi M6. This board is very
> > similar to the NanoPi R6C and R6S boards which are already supported.
> >
> > Main differences:
> > * M.2 M-key slot with PCIe (Also present on R6C)
> > * M.2 E-key slot with PCIe and USB (from hub)
> > * 1 additional USB 2.0 port from an on-board USB hub
> > * RT5616 audio CODEC
> >
> > Patch 2 and 3 moves a bit code around. Please let me know if those two
> > should be squashed together.
> > Next few patches adds some missing bits the common nanopi dtsi file.
> > While the final patch adds support for NanoPi M6. Support for M6 has
> > been split into two files one dtsi and one dts file. This is to make
> > it easier to add support to the new M6V2 board at a later stage.
>
> In my personal opinion I think it would make more sense to sort
> patches in following order:
> - adding/fixing missing bits to the common nanopi-r6 dtsi
> - extract M6/R6 common parts from nanopi-r6 dtsi to nanopi dtsi,
>   nanopi-r6 dtsi includes the nanopi dtsi and no changes to dts files
> - final parts that adds the M6 board
>
> Should probably make it a little bit easier to cherry-pick and bisect.

If the additions/missing bits needs to backported I agree.
I'll cook up a patch set with the order you suggest. Thanks for the feedback.


best regards,
Joachim Eastwood