(subset) [PATCH v3 0/3] Consolidate and clarify LED device tree descriptions on Radxa boards

[Heiko Stuebner]

On Thu, 13 Nov 2025 12:42:19 +0000, FUKAUMI Naoki wrote:
> Currently, on Radxa boards, the power LED is turned on immediately
> after power-up, independent of software control. The heartbeat LED and
> other available LEDs are subsequently turned on by the initial
> software, such as U-Boot, to indicate software is running.
> 
> However, the device tree description for this behavior is inconsistent
> and fragmented, with definitions split between the main Linux DTS
> files and separate U-Boot files (u-boot/arch/arm/dts/*-u-boot.dtsi).
> 
> [...]

Applied, thanks!

[1/3] arm64: dts: rockchip: Use default-state for power LED for Radxa boards
      commit: 6ed597fdbcfa5ffc1a01c8740320c5a20093b863

Best regards,
-- 
Heiko Stuebner <heiko at sntech.de>