[PATCH v6 0/3] Add Radxa CM5 and IO Board

[FUKAUMI Naoki]

(Sorry, "To:" was wrong in previous email)

Hi Joseph,

On 11/14/25 17:06, FUKAUMI Naoki wrote:
> Hi Joseph,
> 
> On 11/5/25 21:15, FUKAUMI Naoki wrote:
>> I'd like to clarify the situation regarding the v6 patch series I 
>> submitted.
>>
>> The original device tree work for the Radxa CM5 and IO Board was 
>> authored by Joseph Kogut. I took over the responsibility of getting it 
>> upstreamed with his agreement.
>>
>> However, I now understand that I should have preserved the original 
>> Signed-off-by chain (and DCO) in the v6 series. This was my oversight.
>>
>> To correct this, I would prefer for Joseph to post the patches 
>> himself, which will not include my Signed-off-by.
> 
> Could you please post the patches?

Please ignore the patches I sent as v6. Also, I don't claim my 
copyright. Feel free (not) to use them.

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

> Best regards,
> 
> -- 
> FUKAUMI Naoki
> Radxa Computer (Shenzhen) Co., Ltd.
> 
>> My apologies for the confusion this caused. Thank you for pointing 
>> this out.
>>
>> Best regards,
>>
>> -- 
>> FUKAUMI Naoki
>> Radxa Computer (Shenzhen) Co., Ltd.
>>
>> On 11/5/25 14:13, FUKAUMI Naoki wrote:
>>> This patch series add support for the Radxa CM5 SoM and IO Board.
>>>
>>> Changes in v6:
>>> (Patch 1/3)
>>> - Fix description; "Radxa CM5" is the correct name
>>> (Patch 2/3)
>>> - Fix #include(s)
>>> - Include rk3588s.dtsi
>>> - Move alias for gmac1 from io board dts
>>> - Add Maskrom key
>>> - Add pinctrl-* for led-0
>>> - Add vcc_1v1_nldo_s3 regulator for pmic
>>> - Move gmac1 (except status) from io board dts
>>> - Fix phy-supply for gmac1
>>> - Fix compatible for vdd_cpu_big1_s0 regulator
>>> - Add eeprom on i2c0
>>> - Add vdd_npu_s0 regulator for rknn
>>> - Fix compatible for rgmii_phy1
>>> - Add pinctrl-* and reset-* for rgmii_phy1
>>> - Add domain-supply for pd_npu
>>> - Add rknn_*
>>> - Add saradc
>>> - Fix properties in sdhci
>>> - Move pmic from io board dts
>>> - Fix vcc*-supply for pmic
>>> - Add regulators in pmic
>>> - Add tsadc
>>> - Move vop(_mmu) from io board dts
>>> - Trivial changes (labels, names, etc)
>>> (Patch 3/3)
>>> - Fix #include(s)
>>> - Remove #include "rk3588s.dtsi"
>>> - Fix model
>>> - Add fan
>>> - Add Recovery key
>>> - Add pinctrl-* for vcc3v3_wf
>>> - Add vcc_sysin regulator
>>> - Add pinctrl-* for vbus5v0_typec
>>> - Add rfkill-bt and rfkill-wlan for M.2 module
>>> - Add sound for es8316
>>> - Add phy-supply for combphy2_psu
>>> - Fix power-role to "source" for fusb302
>>> - Add rtc for hym8536
>>> - Add audio-codec on i2c8 for es8316
>>> - Add i2s0_8ch for es8316
>>> - Add package_thermal for fan
>>> - Add pinctrl-* for pcie2x1l2
>>> - Add pwm11 for fan
>>> - Fix properties in sdmmmc
>>> - Add phy-supply for u2phy2_host and u2phy3_host
>>> - Remove usb_host0_ohci
>>> - Add pinctrl-* for usbdp_phy0
>>> - Trivial changes (labels, names, etc)
>>>
>>> Changes in v5:
>>> (Patch 2/3, per Jimmy)
>>> - Alias eMMC to mmc0
>>> - Remove unused sdio alias
>>> - Move gmac, hdmi0 nodes to carrier board dts
>>> (Patch 3/3, per Jimmy)
>>> - Enable hdmi0_sound and i2s5_8ch
>>> - Remove redundant enablement of sdhci
>>> - Enable usb_host2_xhci
>>>
>>> - Tested HDMI audio
>>>
>>> Changes in v4:
>>> - Fixed XHCI initialization bug by changing try-power-role from source
>>>    to sink
>>>
>>> Changes in v3:
>>> - Addressed YAML syntax error in dt binding (per Rob)
>>> - Fixed whitespace issue in dts reported by checkpatch.pl
>>> - Split base SoM and carrier board into separate patches
>>> - Added further details about the SoM and carrier to the commit
>>>    messages
>>>
>>> Changes in v2:
>>> - Added copyright header and data sheet links
>>> - Removed non-existent property
>>> - Sorted alphabetically
>>> - Removed errant whitespace
>>> - Moved status to the end of each node
>>> - Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
>>> - Removed delays from gmac with internal delay
>>>
>>> Link: https://lore.kernel.org/r/20250617-rk3588s-cm5-io-dts-upstream- 
>>> v5-0-8d96854a5bbd at gmail.com
>>> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
>>> Signed-off-by: Joseph Kogut <joseph.kogut at gmail.com>
>>> ---
>>> I have communicated with Joseph privately and taken ownership of
>>> moving this forward, with his blessing. All bugs belong to me.
>>> ---
>>> FUKAUMI Naoki (3):
>>>    dt-bindings: arm: rockchip: Add Radxa CM5 IO Board
>>>    arm64: dts: rockchip: Add Radxa CM5
>>>    arm64: dts: rockchip: Add Radxa CM5 IO Board
>>>
>>>   .../devicetree/bindings/arm/rockchip.yaml     |   7 +
>>>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>>   .../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 503 +++++++++++++++
>>>   .../boot/dts/rockchip/rk3588s-radxa-cm5.dtsi  | 602 ++++++++++++++++++
>>>   4 files changed, 1113 insertions(+)
>>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5- 
>>> io.dts
>>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
>>
>>
>