[PATCH v6 0/3] Add Radxa CM5 and IO Board

[FUKAUMI Naoki]

Hi Joseph,

On 11/5/25 21:15, FUKAUMI Naoki wrote:
> I'd like to clarify the situation regarding the v6 patch series I 
> submitted.
> 
> The original device tree work for the Radxa CM5 and IO Board was 
> authored by Joseph Kogut. I took over the responsibility of getting it 
> upstreamed with his agreement.
> 
> However, I now understand that I should have preserved the original 
> Signed-off-by chain (and DCO) in the v6 series. This was my oversight.
> 
> To correct this, I would prefer for Joseph to post the patches himself, 
> which will not include my Signed-off-by.

Could you please post the patches?

Best regards,

--
FUKAUMI Naoki
Radxa Computer (Shenzhen) Co., Ltd.

> My apologies for the confusion this caused. Thank you for pointing this 
> out.
> 
> Best regards,
> 
> -- 
> FUKAUMI Naoki
> Radxa Computer (Shenzhen) Co., Ltd.
> 
> On 11/5/25 14:13, FUKAUMI Naoki wrote:
>> This patch series add support for the Radxa CM5 SoM and IO Board.
>>
>> Changes in v6:
>> (Patch 1/3)
>> - Fix description; "Radxa CM5" is the correct name
>> (Patch 2/3)
>> - Fix #include(s)
>> - Include rk3588s.dtsi
>> - Move alias for gmac1 from io board dts
>> - Add Maskrom key
>> - Add pinctrl-* for led-0
>> - Add vcc_1v1_nldo_s3 regulator for pmic
>> - Move gmac1 (except status) from io board dts
>> - Fix phy-supply for gmac1
>> - Fix compatible for vdd_cpu_big1_s0 regulator
>> - Add eeprom on i2c0
>> - Add vdd_npu_s0 regulator for rknn
>> - Fix compatible for rgmii_phy1
>> - Add pinctrl-* and reset-* for rgmii_phy1
>> - Add domain-supply for pd_npu
>> - Add rknn_*
>> - Add saradc
>> - Fix properties in sdhci
>> - Move pmic from io board dts
>> - Fix vcc*-supply for pmic
>> - Add regulators in pmic
>> - Add tsadc
>> - Move vop(_mmu) from io board dts
>> - Trivial changes (labels, names, etc)
>> (Patch 3/3)
>> - Fix #include(s)
>> - Remove #include "rk3588s.dtsi"
>> - Fix model
>> - Add fan
>> - Add Recovery key
>> - Add pinctrl-* for vcc3v3_wf
>> - Add vcc_sysin regulator
>> - Add pinctrl-* for vbus5v0_typec
>> - Add rfkill-bt and rfkill-wlan for M.2 module
>> - Add sound for es8316
>> - Add phy-supply for combphy2_psu
>> - Fix power-role to "source" for fusb302
>> - Add rtc for hym8536
>> - Add audio-codec on i2c8 for es8316
>> - Add i2s0_8ch for es8316
>> - Add package_thermal for fan
>> - Add pinctrl-* for pcie2x1l2
>> - Add pwm11 for fan
>> - Fix properties in sdmmmc
>> - Add phy-supply for u2phy2_host and u2phy3_host
>> - Remove usb_host0_ohci
>> - Add pinctrl-* for usbdp_phy0
>> - Trivial changes (labels, names, etc)
>>
>> Changes in v5:
>> (Patch 2/3, per Jimmy)
>> - Alias eMMC to mmc0
>> - Remove unused sdio alias
>> - Move gmac, hdmi0 nodes to carrier board dts
>> (Patch 3/3, per Jimmy)
>> - Enable hdmi0_sound and i2s5_8ch
>> - Remove redundant enablement of sdhci
>> - Enable usb_host2_xhci
>>
>> - Tested HDMI audio
>>
>> Changes in v4:
>> - Fixed XHCI initialization bug by changing try-power-role from source
>>    to sink
>>
>> Changes in v3:
>> - Addressed YAML syntax error in dt binding (per Rob)
>> - Fixed whitespace issue in dts reported by checkpatch.pl
>> - Split base SoM and carrier board into separate patches
>> - Added further details about the SoM and carrier to the commit
>>    messages
>>
>> Changes in v2:
>> - Added copyright header and data sheet links
>> - Removed non-existent property
>> - Sorted alphabetically
>> - Removed errant whitespace
>> - Moved status to the end of each node
>> - Removed pinctrl-names property from leds (indicated by CHECK_DTBS)
>> - Removed delays from gmac with internal delay
>>
>> Link: https://lore.kernel.org/r/20250617-rk3588s-cm5-io-dts-upstream- 
>> v5-0-8d96854a5bbd at gmail.com
>> Signed-off-by: FUKAUMI Naoki <naoki at radxa.com>
>> Signed-off-by: Joseph Kogut <joseph.kogut at gmail.com>
>> ---
>> I have communicated with Joseph privately and taken ownership of
>> moving this forward, with his blessing. All bugs belong to me.
>> ---
>> FUKAUMI Naoki (3):
>>    dt-bindings: arm: rockchip: Add Radxa CM5 IO Board
>>    arm64: dts: rockchip: Add Radxa CM5
>>    arm64: dts: rockchip: Add Radxa CM5 IO Board
>>
>>   .../devicetree/bindings/arm/rockchip.yaml     |   7 +
>>   arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>>   .../dts/rockchip/rk3588s-radxa-cm5-io.dts     | 503 +++++++++++++++
>>   .../boot/dts/rockchip/rk3588s-radxa-cm5.dtsi  | 602 ++++++++++++++++++
>>   4 files changed, 1113 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5- 
>> io.dts
>>   create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-radxa-cm5.dtsi
> 
>