[PATCH v3 11/12] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property

[Krzysztof Kozlowski]

On 07/10/2024 08:50, Damien Le Moal wrote:
> On 10/7/24 15:12, Krzysztof Kozlowski wrote:
>> On Mon, Oct 07, 2024 at 01:12:17PM +0900, Damien Le Moal wrote:
>>> From: Wilfred Mallawa <wilfred.mallawa at wdc.com>
>>>
>>> Describe the `ep-gpios` property which is used to map the PERST# input
>>> signal for endpoint mode.
>>
>> Why "ep" for PERST signal? Looks totally unrelated name. There is
>> already reset-gpios exactly for PERST, so you are duplicating it. Why?
> 
> Because the host side controller already has the same "ep-gpios" property.
> 
> Documentation/devicetree/bindings/pci/rockchip,rk3399-pcie.yaml

If host has it, then it is a common property so goes to common schema
for these devices.

> 
> So naming that property the same allows common code to initialize that gpio in
> rockchip_pcie_parse_dt().
> 
> Also, I do not see reset-gpios being defined/used by this driver (host and ep
> sides).

I am talking about bindings, not driver.

Best regards,
Krzysztof