[PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board

[Damon Ding]

Hi Dmitry,

On 2024/12/20 8:20, Dmitry Baryshkov wrote:
> On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
>> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
>> - Add edp-panel node
>> - Set pinctrl of pwm12 for backlight
>> - Enable edp0/hdptxphy0/vp2
>>
>> Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
>>
>> ---
>>
>> Changes in v2:
>> - Remove brightness-levels and default-brightness-level properties in
>>    backlight node.
>> - Add the detail DT changes to commit message.
>>
>> Changes in v3:
>> - Use aux-bus instead of platform bus for edp-panel.
>> ---
>>   .../boot/dts/rockchip/rk3588s-evb1-v10.dts    | 52 +++++++++++++++++++
>>   1 file changed, 52 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> index bc4077575beb..9547ab18e596 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
>> @@ -9,6 +9,7 @@
>>   #include <dt-bindings/gpio/gpio.h>
>>   #include <dt-bindings/input/input.h>
>>   #include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/soc/rockchip,vop2.h>
>>   #include <dt-bindings/usb/pd.h>
>>   #include "rk3588s.dtsi"
>>   
>> @@ -238,6 +239,41 @@ &combphy2_psu {
>>   	status = "okay";
>>   };
>>   
>> +&edp0 {
>> +	force-hpd;
>> +	status = "okay";
>> +
>> +	aux-bus {
>> +		panel {
>> +			compatible = "lg,lp079qx1-sp0v";
> 
> Why do you need the particular compat string here? Can you use the
> generic "edp-panel" instead? What if the user swaps the panel?
> 

The eDP panels used in conjunction with the RK3588S EVB1 have broken 
identification, which is one of the valid reasons for using a particular 
compat string. So the generic_edp_panel_probe() can not return success 
when using the "edp-panel".

>> +			backlight = <&backlight>;
>> +			power-supply = <&vcc3v3_lcd_edp>;
>> +
>> +			port {
>> +				panel_in_edp: endpoint {
>> +					remote-endpoint = <&edp_out_panel>;
>> +				};
>> +			};
>> +		};
>> +	};
>> +};
>> +
>> +&edp0_in {
>> +	edp0_in_vp2: endpoint {
>> +		remote-endpoint = <&vp2_out_edp0>;
>> +	};
>> +};
>> +
>> +&edp0_out {
>> +	edp_out_panel: endpoint {
>> +		remote-endpoint = <&panel_in_edp>;
>> +	};
>> +};
>> +
>> +&hdptxphy0 {
>> +	status = "okay";
>> +};
>> +
>>   &i2c3 {
>>   	status = "okay";
>>   
>> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
>>   };
>>   
>>   &pwm12 {
>> +	pinctrl-0 = <&pwm12m1_pins>;
>>   	status = "okay";
>>   };
>>   
>> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint at 1 {
>>   		};
>>   	};
>>   };
>> +
>> +&vop_mmu {
>> +	status = "okay";
>> +};
>> +
>> +&vop {
>> +	status = "okay";
>> +};
>> +
>> +&vp2 {
>> +	vp2_out_edp0: endpoint at ROCKCHIP_VOP2_EP_EDP0 {
>> +		reg = <ROCKCHIP_VOP2_EP_EDP0>;
>> +		remote-endpoint = <&edp0_in_vp2>;
>> +	};
>> +};
>> -- 
>> 2.34.1
>>
> 
Best regards,
Damon