[PATCH v3 14/15] arm64: dts: rockchip: Enable eDP0 display on RK3588S EVB1 board

[Dmitry Baryshkov]

On Thu, Dec 19, 2024 at 04:06:03PM +0800, Damon Ding wrote:
> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
> - Add edp-panel node
> - Set pinctrl of pwm12 for backlight
> - Enable edp0/hdptxphy0/vp2
> 
> Signed-off-by: Damon Ding <damon.ding at rock-chips.com>
> 
> ---
> 
> Changes in v2:
> - Remove brightness-levels and default-brightness-level properties in
>   backlight node.
> - Add the detail DT changes to commit message.
> 
> Changes in v3:
> - Use aux-bus instead of platform bus for edp-panel.
> ---
>  .../boot/dts/rockchip/rk3588s-evb1-v10.dts    | 52 +++++++++++++++++++
>  1 file changed, 52 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> index bc4077575beb..9547ab18e596 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> @@ -9,6 +9,7 @@
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
>  #include <dt-bindings/usb/pd.h>
>  #include "rk3588s.dtsi"
>  
> @@ -238,6 +239,41 @@ &combphy2_psu {
>  	status = "okay";
>  };
>  
> +&edp0 {
> +	force-hpd;
> +	status = "okay";
> +
> +	aux-bus {
> +		panel {
> +			compatible = "lg,lp079qx1-sp0v";

Why do you need the particular compat string here? Can you use the
generic "edp-panel" instead? What if the user swaps the panel?

> +			backlight = <&backlight>;
> +			power-supply = <&vcc3v3_lcd_edp>;
> +
> +			port {
> +				panel_in_edp: endpoint {
> +					remote-endpoint = <&edp_out_panel>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&edp0_in {
> +	edp0_in_vp2: endpoint {
> +		remote-endpoint = <&vp2_out_edp0>;
> +	};
> +};
> +
> +&edp0_out {
> +	edp_out_panel: endpoint {
> +		remote-endpoint = <&panel_in_edp>;
> +	};
> +};
> +
> +&hdptxphy0 {
> +	status = "okay";
> +};
> +
>  &i2c3 {
>  	status = "okay";
>  
> @@ -399,6 +435,7 @@ usbc0_int: usbc0-int {
>  };
>  
>  &pwm12 {
> +	pinctrl-0 = <&pwm12m1_pins>;
>  	status = "okay";
>  };
>  
> @@ -1168,3 +1205,18 @@ usbdp_phy0_dp_altmode_mux: endpoint at 1 {
>  		};
>  	};
>  };
> +
> +&vop_mmu {
> +	status = "okay";
> +};
> +
> +&vop {
> +	status = "okay";
> +};
> +
> +&vp2 {
> +	vp2_out_edp0: endpoint at ROCKCHIP_VOP2_EP_EDP0 {
> +		reg = <ROCKCHIP_VOP2_EP_EDP0>;
> +		remote-endpoint = <&edp0_in_vp2>;
> +	};
> +};
> -- 
> 2.34.1
> 

-- 
With best wishes
Dmitry