[PATCH v3 3/4] dt-bindings: arm: rockchip: Add SOQuartz Model A

[Nicolas Frattaroli]

The SOQuartz Model A base board is a carrier board for the CM4
form factor, designed around the PINE64 SOQuartz CM4 SoM.

The board sports "Model A" dimensions like the Quartz64 Model A,
but is not to be confused with that.

As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2
x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP
flat-flex cable connector, a 12V DC barrel jack for power input
and power/reset buttons as well as a microSD card slot.

Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas at gmail.com>
---
 Documentation/devicetree/bindings/arm/rockchip.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index 19797aca1fa0..1eff0afc19a1 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -580,6 +580,7 @@ properties:
           - enum:
               - pine64,soquartz-blade
               - pine64,soquartz-cm4io
+              - pine64,soquartz-model-a
           - const: pine64,soquartz
           - const: rockchip,rk3566
 
-- 
2.38.1