Aw: Re: Re: [RFC/RFT 1/6] dt-bindings: phy: rockchip: add pcie3 phy

[Krzysztof Kozlowski]

On 19/04/2022 22:36, Frank Wunderlich wrote:
>> Just use default as I wrote above.
> 
> so like this?
> 
>   rockchip,pcie30-phymode:
>     $ref: '/schemas/types.yaml#/definitions/uint32'
>     description: |
>       set the phy-mode for enabling bifurcation
>       bit0: bifurcation for port 0
>       bit1: bifurcation for port 1
>       bit2: aggregation
>       constants are defined in the dt-bindings/phy/phy-rockchip-pcie3.h
>     minimum: 0x0
>     maximum: 0x4
>     default: 0x4

Yes.


Best regards,
Krzysztof