[PATCH] arm64: dts: rockchip: remove PCIe assigned-clocks in excavator baseboard

[Vicente Bergas]

Reference clock is needed for pcie_phy, not pcie controller.
Actually pcie_phy doesn't need this since rk3399 clock driver
already take care of this.

Signed-off-by: Vicente Bergas <vicencb at gmail.com>
Suggested-by: Shawn Lin <shawn.lin at rock-chips.com>
---
 arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index 4d47150d6862..3d7179aba3fb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
@@ -195,9 +195,6 @@
 };
 
 &pcie0 {
-	assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
-	assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
-	assigned-clock-rates = <100000000>;
 	ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
 	num-lanes = <4>;
 	pinctrl-names = "default";
-- 
2.16.2