[PATCH v4 4/7] mfd: rk808: Add RK805 support
Elaine Zhang
zhangqing at rock-chips.com
Thu Mar 23 19:28:25 PDT 2017
On 03/23/2017 08:23 PM, Lee Jones wrote:
> On Fri, 17 Mar 2017, Elaine Zhang wrote:
>
>> The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
>> devices. It contains the following components:
>>
>> - Regulators
>> - RTC
>> - Clocking
>>
>> Both RK808 and RK805 chips are using a similar register map,
>> so we can reuse the RTC and Clocking functionality.
>>
>> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
>> ---
>> drivers/mfd/Kconfig | 4 +-
>> drivers/mfd/rk808.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++
>> 2 files changed, 124 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 55ecdfb74d31..b410a348b756 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -892,13 +892,13 @@ config MFD_RC5T583
>> different functionality of the device.
>>
>> config MFD_RK808
>> - tristate "Rockchip RK808/RK818 Power Management Chip"
>> + tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
>> depends on I2C && OF
>> select MFD_CORE
>> select REGMAP_I2C
>> select REGMAP_IRQ
>> help
>> - If you say yes here you get support for the RK808 and RK818
>> + If you say yes here you get support for the RK805, RK808 and RK818
>> Power Management chips.
>> This driver provides common support for accessing the device
>> through I2C interface. The device supports multiple sub-devices
>> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
>> index 3334a2a7f3fb..fdd4449b14b0 100644
>> --- a/drivers/mfd/rk808.c
>> +++ b/drivers/mfd/rk808.c
>> @@ -70,6 +70,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> .volatile_reg = rk808_is_volatile_reg,
>> };
>>
>> +static const struct regmap_config rk805_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .max_register = RK805_OFF_SOURCE_REG,
>> + .cache_type = REGCACHE_RBTREE,
>> + .volatile_reg = rk808_is_volatile_reg,
>> +};
>> +
>> static const struct regmap_config rk808_regmap_config = {
>> .reg_bits = 8,
>> .val_bits = 8,
>> @@ -86,6 +94,16 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> }
>> };
>>
>> +static const struct mfd_cell rk805s[] = {
>> + { .name = "rk808-clkout", },
>> + { .name = "rk808-regulator", },
>> + {
>> + .name = "rk808-rtc",
>> + .num_resources = ARRAY_SIZE(rtc_resources),
>> + .resources = &rtc_resources[0],
>> + },
>> +};
>> +
>> static const struct mfd_cell rk808s[] = {
>> { .name = "rk808-clkout", },
>> { .name = "rk808-regulator", },
>> @@ -106,6 +124,20 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> },
>> };
>>
>> +static const struct rk808_reg_data rk805_pre_init_reg[] = {
>> + {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
>> + RK805_BUCK1_2_ILMAX_4000MA},
>> + {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
>> + RK805_BUCK1_2_ILMAX_4000MA},
>> + {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
>> + RK805_BUCK3_ILMAX_3000MA},
>> + {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
>> + RK805_BUCK4_ILMAX_3500MA},
>> + {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
>> + {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
>> + {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
>> +};
>> +
>> static const struct rk808_reg_data rk808_pre_init_reg[] = {
>> { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
>> { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
>> @@ -135,6 +167,41 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> VB_LO_SEL_3500MV },
>> };
>>
>> +static const struct regmap_irq rk805_irqs[] = {
>> + [RK805_IRQ_PWRON_RISE] = {
>> + .mask = RK805_IRQ_PWRON_RISE_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_VB_LOW] = {
>> + .mask = RK805_IRQ_VB_LOW_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_PWRON] = {
>> + .mask = RK805_IRQ_PWRON_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_PWRON_LP] = {
>> + .mask = RK805_IRQ_PWRON_LP_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_HOTDIE] = {
>> + .mask = RK805_IRQ_HOTDIE_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_RTC_ALARM] = {
>> + .mask = RK805_IRQ_RTC_ALARM_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_RTC_PERIOD] = {
>> + .mask = RK805_IRQ_RTC_PERIOD_MSK,
>> + .reg_offset = 0,
>> + },
>> + [RK805_IRQ_PWRON_FALL] = {
>> + .mask = RK805_IRQ_PWRON_FALL_MSK,
>> + .reg_offset = 0,
>> + },
>> +};
>> +
>> static const struct regmap_irq rk808_irqs[] = {
>> /* INT_STS */
>> [RK808_IRQ_VOUT_LO] = {
>> @@ -247,6 +314,17 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> },
>> };
>>
>> +static struct regmap_irq_chip rk805_irq_chip = {
>> + .name = "rk805",
>> + .irqs = rk805_irqs,
>> + .num_irqs = ARRAY_SIZE(rk805_irqs),
>> + .num_regs = 1,
>> + .status_base = RK805_INT_STS_REG,
>> + .mask_base = RK805_INT_STS_MSK_REG,
>> + .ack_base = RK805_INT_STS_REG,
>> + .init_ack_masked = true,
>> +};
>> +
>> static const struct regmap_irq_chip rk808_irq_chip = {
>> .name = "rk808",
>> .irqs = rk808_irqs,
>> @@ -272,6 +350,38 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
>> };
>>
>> static struct i2c_client *rk808_i2c_client;
>> +
>> +static void rk805_shutdown_prepare(void)
>> +{
>> + int ret;
>> + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
>
> Nit: Can you switch these two around?
>
>> + if (!rk808) {
>> + dev_warn(&rk808_i2c_client->dev,
>> + "have no rk808, so do nothing here\n");
>> + return;
>> + }
This is follow the rk808 and rk818 device_shutdown func.Check the rk808
whether NULL.
>
> What's happening here? Is it possible for rk808 to be NULL? If so,
> under what circumstances can this happen? And is that truly an error?
>
>> + /* close rtc int when power off */
>
> Use proper grammar, "Close RTC".
>
> What is int? I'm guessing you mean either "interrupt" or "IRQ".
>
>> + regmap_update_bits(rk808->regmap,
>> + RK808_INT_STS_MSK_REG1,
>
> "when power off" should either be "when we power off", "during
> power off", or something of that nature.
>
>> + RK805_RTC_PERIOD_INT_MASK |
>> + RK805_RTC_ALARM_INT_MASK,
>> + RK805_RTC_PERIOD_INT_MASK |
>> + RK805_RTC_ALARM_INT_MASK);
>> + regmap_update_bits(rk808->regmap,
>> + RK808_RTC_INT_REG,
>> + RK805_INT_ALARM_EN | RK805_INT_TIMER_EN,
>> + 0);
>> +
>> + /* pmic sleep shutdown function */
>
> "PMIC"
>
> 'sleep' or 'shutdown' can't be both.
>
> Looks like shutdown to me.
>
I will fixed it in patch V5. Write dev_off directly to shutdown the
rk805 device.
>> + ret = regmap_update_bits(rk808->regmap,
>> + RK805_GPIO_IO_POL_REG,
>> + SLP_SD_MSK, SHUTDOWN_FUN);
>> + if (ret)
>> + dev_err(&rk808_i2c_client->dev, "power off error!\n");
>> +}
>> +
>> static void rk808_device_shutdown(void)
>> {
>> int ret;
>> @@ -309,6 +419,7 @@ static void rk818_device_shutdown(void)
>> }
>>
>> static const struct of_device_id rk808_of_match[] = {
>> + { .compatible = "rockchip,rk805" },
>> { .compatible = "rockchip,rk808" },
>> { .compatible = "rockchip,rk818" },
>> { },
>> @@ -323,6 +434,7 @@ static int rk808_probe(struct i2c_client *client,
>> const struct rk808_reg_data *pre_init_reg;
>> const struct mfd_cell *cells;
>> void (*pm_pwroff_fn)(void);
>> + void (*pm_shutdown_prepare_fn)(void);
>> int nr_pre_init_regs;
>> int nr_cells;
>> int pm_off = 0, msb, lsb;
>> @@ -352,6 +464,15 @@ static int rk808_probe(struct i2c_client *client,
>> dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
>>
>> switch (rk808->variant) {
>> + case RK805_ID:
>> + rk808->regmap_cfg = &rk805_regmap_config;
>> + rk808->regmap_irq_chip = &rk805_irq_chip;
>> + pre_init_reg = rk805_pre_init_reg;
>> + nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
>> + cells = rk805s;
>> + nr_cells = ARRAY_SIZE(rk805s);
>> + pm_shutdown_prepare_fn = rk805_shutdown_prepare;
>> + break;
>> case RK808_ID:
>> rk808->regmap_cfg = &rk808_regmap_config;
>> rk808->regmap_irq_chip = &rk808_irq_chip;
>> @@ -444,6 +565,7 @@ static int rk808_remove(struct i2c_client *client)
>> }
>>
>> static const struct i2c_device_id rk808_ids[] = {
>> + { "rk805" },
>> { "rk808" },
>> { "rk818" },
>> { },
>
More information about the Linux-rockchip
mailing list