[PATCH v4 4/7] mfd: rk808: Add RK805 support
Lee Jones
lee.jones at linaro.org
Thu Mar 23 05:23:54 PDT 2017
On Fri, 17 Mar 2017, Elaine Zhang wrote:
> The RK805 chip is a Power Management IC (PMIC) for multimedia and handheld
> devices. It contains the following components:
>
> - Regulators
> - RTC
> - Clocking
>
> Both RK808 and RK805 chips are using a similar register map,
> so we can reuse the RTC and Clocking functionality.
>
> Signed-off-by: Elaine Zhang <zhangqing at rock-chips.com>
> ---
> drivers/mfd/Kconfig | 4 +-
> drivers/mfd/rk808.c | 122 ++++++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 124 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 55ecdfb74d31..b410a348b756 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -892,13 +892,13 @@ config MFD_RC5T583
> different functionality of the device.
>
> config MFD_RK808
> - tristate "Rockchip RK808/RK818 Power Management Chip"
> + tristate "Rockchip RK805/RK808/RK818 Power Management Chip"
> depends on I2C && OF
> select MFD_CORE
> select REGMAP_I2C
> select REGMAP_IRQ
> help
> - If you say yes here you get support for the RK808 and RK818
> + If you say yes here you get support for the RK805, RK808 and RK818
> Power Management chips.
> This driver provides common support for accessing the device
> through I2C interface. The device supports multiple sub-devices
> diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
> index 3334a2a7f3fb..fdd4449b14b0 100644
> --- a/drivers/mfd/rk808.c
> +++ b/drivers/mfd/rk808.c
> @@ -70,6 +70,14 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> .volatile_reg = rk808_is_volatile_reg,
> };
>
> +static const struct regmap_config rk805_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = RK805_OFF_SOURCE_REG,
> + .cache_type = REGCACHE_RBTREE,
> + .volatile_reg = rk808_is_volatile_reg,
> +};
> +
> static const struct regmap_config rk808_regmap_config = {
> .reg_bits = 8,
> .val_bits = 8,
> @@ -86,6 +94,16 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> }
> };
>
> +static const struct mfd_cell rk805s[] = {
> + { .name = "rk808-clkout", },
> + { .name = "rk808-regulator", },
> + {
> + .name = "rk808-rtc",
> + .num_resources = ARRAY_SIZE(rtc_resources),
> + .resources = &rtc_resources[0],
> + },
> +};
> +
> static const struct mfd_cell rk808s[] = {
> { .name = "rk808-clkout", },
> { .name = "rk808-regulator", },
> @@ -106,6 +124,20 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> },
> };
>
> +static const struct rk808_reg_data rk805_pre_init_reg[] = {
> + {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
> + RK805_BUCK1_2_ILMAX_4000MA},
> + {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK,
> + RK805_BUCK1_2_ILMAX_4000MA},
> + {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
> + RK805_BUCK3_ILMAX_3000MA},
> + {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK,
> + RK805_BUCK4_ILMAX_3500MA},
> + {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA},
> + {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN},
> + {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C},
> +};
> +
> static const struct rk808_reg_data rk808_pre_init_reg[] = {
> { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA },
> { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA },
> @@ -135,6 +167,41 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> VB_LO_SEL_3500MV },
> };
>
> +static const struct regmap_irq rk805_irqs[] = {
> + [RK805_IRQ_PWRON_RISE] = {
> + .mask = RK805_IRQ_PWRON_RISE_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_VB_LOW] = {
> + .mask = RK805_IRQ_VB_LOW_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON] = {
> + .mask = RK805_IRQ_PWRON_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON_LP] = {
> + .mask = RK805_IRQ_PWRON_LP_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_HOTDIE] = {
> + .mask = RK805_IRQ_HOTDIE_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_RTC_ALARM] = {
> + .mask = RK805_IRQ_RTC_ALARM_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_RTC_PERIOD] = {
> + .mask = RK805_IRQ_RTC_PERIOD_MSK,
> + .reg_offset = 0,
> + },
> + [RK805_IRQ_PWRON_FALL] = {
> + .mask = RK805_IRQ_PWRON_FALL_MSK,
> + .reg_offset = 0,
> + },
> +};
> +
> static const struct regmap_irq rk808_irqs[] = {
> /* INT_STS */
> [RK808_IRQ_VOUT_LO] = {
> @@ -247,6 +314,17 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> },
> };
>
> +static struct regmap_irq_chip rk805_irq_chip = {
> + .name = "rk805",
> + .irqs = rk805_irqs,
> + .num_irqs = ARRAY_SIZE(rk805_irqs),
> + .num_regs = 1,
> + .status_base = RK805_INT_STS_REG,
> + .mask_base = RK805_INT_STS_MSK_REG,
> + .ack_base = RK805_INT_STS_REG,
> + .init_ack_masked = true,
> +};
> +
> static const struct regmap_irq_chip rk808_irq_chip = {
> .name = "rk808",
> .irqs = rk808_irqs,
> @@ -272,6 +350,38 @@ static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg)
> };
>
> static struct i2c_client *rk808_i2c_client;
> +
> +static void rk805_shutdown_prepare(void)
> +{
> + int ret;
> + struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client);
Nit: Can you switch these two around?
> + if (!rk808) {
> + dev_warn(&rk808_i2c_client->dev,
> + "have no rk808, so do nothing here\n");
> + return;
> + }
What's happening here? Is it possible for rk808 to be NULL? If so,
under what circumstances can this happen? And is that truly an error?
> + /* close rtc int when power off */
Use proper grammar, "Close RTC".
What is int? I'm guessing you mean either "interrupt" or "IRQ".
> + regmap_update_bits(rk808->regmap,
> + RK808_INT_STS_MSK_REG1,
"when power off" should either be "when we power off", "during
power off", or something of that nature.
> + RK805_RTC_PERIOD_INT_MASK |
> + RK805_RTC_ALARM_INT_MASK,
> + RK805_RTC_PERIOD_INT_MASK |
> + RK805_RTC_ALARM_INT_MASK);
> + regmap_update_bits(rk808->regmap,
> + RK808_RTC_INT_REG,
> + RK805_INT_ALARM_EN | RK805_INT_TIMER_EN,
> + 0);
> +
> + /* pmic sleep shutdown function */
"PMIC"
'sleep' or 'shutdown' can't be both.
Looks like shutdown to me.
> + ret = regmap_update_bits(rk808->regmap,
> + RK805_GPIO_IO_POL_REG,
> + SLP_SD_MSK, SHUTDOWN_FUN);
> + if (ret)
> + dev_err(&rk808_i2c_client->dev, "power off error!\n");
> +}
> +
> static void rk808_device_shutdown(void)
> {
> int ret;
> @@ -309,6 +419,7 @@ static void rk818_device_shutdown(void)
> }
>
> static const struct of_device_id rk808_of_match[] = {
> + { .compatible = "rockchip,rk805" },
> { .compatible = "rockchip,rk808" },
> { .compatible = "rockchip,rk818" },
> { },
> @@ -323,6 +434,7 @@ static int rk808_probe(struct i2c_client *client,
> const struct rk808_reg_data *pre_init_reg;
> const struct mfd_cell *cells;
> void (*pm_pwroff_fn)(void);
> + void (*pm_shutdown_prepare_fn)(void);
> int nr_pre_init_regs;
> int nr_cells;
> int pm_off = 0, msb, lsb;
> @@ -352,6 +464,15 @@ static int rk808_probe(struct i2c_client *client,
> dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant);
>
> switch (rk808->variant) {
> + case RK805_ID:
> + rk808->regmap_cfg = &rk805_regmap_config;
> + rk808->regmap_irq_chip = &rk805_irq_chip;
> + pre_init_reg = rk805_pre_init_reg;
> + nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg);
> + cells = rk805s;
> + nr_cells = ARRAY_SIZE(rk805s);
> + pm_shutdown_prepare_fn = rk805_shutdown_prepare;
> + break;
> case RK808_ID:
> rk808->regmap_cfg = &rk808_regmap_config;
> rk808->regmap_irq_chip = &rk808_irq_chip;
> @@ -444,6 +565,7 @@ static int rk808_remove(struct i2c_client *client)
> }
>
> static const struct i2c_device_id rk808_ids[] = {
> + { "rk805" },
> { "rk808" },
> { "rk818" },
> { },
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
More information about the Linux-rockchip
mailing list