[PATCH v3 1/2] drm/bridge: dw-hdmi: support optional supply regulators
heiko at sntech.de
Fri Jun 12 00:27:07 PDT 2015
Am Mittwoch, 10. Juni 2015, 00:36:18 schrieb Russell King - ARM Linux:
> On Wed, Jun 10, 2015 at 01:29:43AM +0200, Heiko Stübner wrote:
> > Allthough from the discussion and explanations I've now also got the
> > "don't
> > make it worse" feeling, so am somehow reluctant to add supplies that also
> > might describe this inadequately.
> > The Rockchip-specific documentation only lists the two supplies as
> > AVDD_1V0, AVDD_1V8 with a description of "DC supply voltage for Analog
> > part of HDMI". The supplies aren't mentioned otherwise at all, so I guess
> > I'll ponder this a bit more at first.
> Are they controllable from software at all? If they aren't, then
> I'd suggest leaving them out until we have a distinction between
> the Tx and Phy - much as we do for iMX6.
they are supplied by the pmic the system uses (named vdd10_lcd and vdd18_lcd
in the soc manuals/schematics) and supply the individual output encoder
analog parts (hdmi, edp, lvds, etc). So if there is no output at all, they
should be able to be turned off.
More information about the Linux-rockchip