[PATCH v2 13/15] phy: starfive: Add jh7110-inno-hdmi-phy driver

[Icenowy Zheng]

在 2026-09-06日的 16:59 +0200，Maud Spierings写道：
> On 9/6/26 07:39, Dominique Belhachemi wrote:
> > On Sun, Aug 30, 2026 at 10:17 AM Maud Spierings 
> > <maud_spierings at murena.io <mailto:maud_spierings at murena.io>> wrote:
> > 
> >     I was still having some glitching happening on the display, but
> > I've
> >     found the way to fix that, the question is what is actually
> >     happening here.
> > 
> >         0x29590020 <- 0x00000005
> >     This one I have no idea, it is 0x00000009 with this patch
> > series but
> >     with the vendor kernel I get the value above. When I hook up my
> >     external
> >     display (regular 1440p) this becomes 0x0000000D on the vendor
> > kernel.
> > 
> >     But I can't find this register being written to anywhere there?
> > 
> > 
> > Maybe this needs to be swapped?
> > 
> > drivers/gpu/drm/bridge/inno-hdmi.c
> >    -#define v_HSYNC_POLARITY(n)          ((n) << 3)
> >    -#define v_VSYNC_POLARITY(n)          ((n) << 2)
> >    +#define v_HSYNC_POLARITY(n)          ((n) << 2)
> >    +#define v_VSYNC_POLARITY(n)          ((n) << 3)

Very weirdly, the original definition here matches current mainline
inno-hdmi.c, but the changed definition matches JH7110 vendor
inno_hdmi.h [1].

Some weird must happened.

Thanks,
Icenowy


[1]
https://github.com/DC-DeepComputing/fml13v01-linux/blob/97c64fe2832b6826914b6da7aa4febcdd4d3d444/drivers/gpu/drm/verisilicon/inno_hdmi.h

> > 
> 
> Those seem to only be relevant the 0x08 register:
>  > #define HDMI_VIDEO_TIMING_CTL		0x08
> 
> also in the code:
> 
>  > /* Set detail external video timing polarity and interlace mode */
>  > value = v_EXTERANL_VIDEO(1);
>  > value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
>  > 	 v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
>  > value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
>  > 	 v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
>  > value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
>  > 	 v_INETLACE(1) : v_INETLACE(0);
>  > hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);