[PATCH v2 13/15] phy: starfive: Add jh7110-inno-hdmi-phy driver

[Maud Spierings]

On 9/6/26 07:39, Dominique Belhachemi wrote:
> On Sun, Aug 30, 2026 at 10:17 AM Maud Spierings 
> <maud_spierings at murena.io <mailto:maud_spierings at murena.io>> wrote:
> 
>     I was still having some glitching happening on the display, but I've
>     found the way to fix that, the question is what is actually
>     happening here.
> 
>         0x29590020 <- 0x00000005
>     This one I have no idea, it is 0x00000009 with this patch series but
>     with the vendor kernel I get the value above. When I hook up my
>     external
>     display (regular 1440p) this becomes 0x0000000D on the vendor kernel.
> 
>     But I can't find this register being written to anywhere there?
> 
> 
> Maybe this needs to be swapped?
> 
> drivers/gpu/drm/bridge/inno-hdmi.c
>    -#define v_HSYNC_POLARITY(n)          ((n) << 3)
>    -#define v_VSYNC_POLARITY(n)          ((n) << 2)
>    +#define v_HSYNC_POLARITY(n)          ((n) << 2)
>    +#define v_VSYNC_POLARITY(n)          ((n) << 3)
> 

Those seem to only be relevant the 0x08 register:
 > #define HDMI_VIDEO_TIMING_CTL		0x08

also in the code:

 > /* Set detail external video timing polarity and interlace mode */
 > value = v_EXTERANL_VIDEO(1);
 > value |= mode->flags & DRM_MODE_FLAG_PHSYNC ?
 > 	 v_HSYNC_POLARITY(1) : v_HSYNC_POLARITY(0);
 > value |= mode->flags & DRM_MODE_FLAG_PVSYNC ?
 > 	 v_VSYNC_POLARITY(1) : v_VSYNC_POLARITY(0);
 > value |= mode->flags & DRM_MODE_FLAG_INTERLACE ?
 > 	 v_INETLACE(1) : v_INETLACE(0);
 > hdmi_writeb(hdmi, HDMI_VIDEO_TIMING_CTL, value);