[PATCH 1/5] riscv: dts: spacemit: set console baud rate on K3 Pico-ITX board

[Guodong Xu]

Hi Aurelien,

On 2026-06-20 08:22, Aurelien Jarno wrote:
>Because the default console's baud rate is not set, defconfig kernels do
>not have any serial output on this platform. Set the baud rate to
>115200, matching what is used by U-Boot etc on this platform.
>
>Fixes: 7a6131804986 ("riscv: dts: spacemit: add K3 Pico-ITX board support")
>Signed-off-by: Aurelien Jarno <aurelien at aurel32.net>

Thanks for the patch.

Reviewed-by: Guodong Xu <docular.xu at gmail.com>

>---
> arch/riscv/boot/dts/spacemit/k3-pico-itx.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>index b89c1521e6649..509cebc0c9568 100644
>--- a/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>+++ b/arch/riscv/boot/dts/spacemit/k3-pico-itx.dts
>@@ -18,7 +18,7 @@ aliases {
> 	};
>
> 	chosen {
>-		stdout-path = "serial0";
>+		stdout-path = "serial0:115200n8";
> 	};
>
> 	memory at 100000000 {
>-- 
>2.53.0
>
>
>_______________________________________________
>linux-riscv mailing list
>linux-riscv at lists.infradead.org
>http://lists.infradead.org/mailman/listinfo/linux-riscv