[PATCH v10 3/3] iio: dac: Add AD5529R DAC driver support

[Jonathan Cameron]

> Add support for AD5529R 16-channel, 12/16 bit Digital to Analog Converter
> from Analog Devices.
> 
> The device communicates over SPI and supports per-channel output range
> configuration. An optional external 4.096V reference can be used in
> place of the internal reference.
> 
> Signed-off-by: Janani Sunil <janani.sunil at analog.com>

Just a couple of minor additions from me.



>  
> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
> index 992f8930f95c..8dc644522b1e 100644
> --- a/drivers/iio/dac/Makefile
> +++ b/drivers/iio/dac/Makefile
> @@ -18,6 +18,7 @@ obj-$(CONFIG_AD5446) += ad5446.o
>  obj-$(CONFIG_AD5446_SPI) += ad5446-spi.o
>  obj-$(CONFIG_AD5446_I2C) += ad5446-i2c.o
>  obj-$(CONFIG_AD5449) += ad5449.o
> +obj-$(CONFIG_AD5529R) += ad5529r.o
>  obj-$(CONFIG_AD5592R_BASE) += ad5592r-base.o
>  obj-$(CONFIG_AD5592R) += ad5592r.o
>  obj-$(CONFIG_AD5593R) += ad5593r.o
> diff --git a/drivers/iio/dac/ad5529r.c b/drivers/iio/dac/ad5529r.c
> new file mode 100644
> index 000000000000..52601cbf28d5
> --- /dev/null
> +++ b/drivers/iio/dac/ad5529r.c
> @@ -0,0 +1,536 @@

Why do we need those outer () ?

...

> +static int ad5529r_parse_channel_ranges(struct device *dev,
> +					struct ad5529r_state *st)
> +{
> +	unsigned long channel_mask = 0;
> +	s32 vals[2];

Where possible, I'd move these into narrower scope.
That tends to make the code a little easier to reason about.

> +	int ret, range_idx;
> +	u32 ch;
> +
> +	device_for_each_child_node_scoped(dev, child) {
> +		if (st->num_channels == ARRAY_SIZE(st->channels))
> +			return dev_err_probe(dev, -ECHRNG, "Too many channels\n");
> +
> +		ret = fwnode_property_read_u32(child, "reg", &ch);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Missing reg property in channel node\n");
> +
> +		if (ch >= AD5529R_MAX_CHANNELS)
> +			return dev_err_probe(dev, -EINVAL,
> +					     "Channel %u exceeds maximum 15\n",
> +					     ch);
> +
> +		if (channel_mask & BIT(ch))
> +			return dev_err_probe(dev, -EINVAL,
> +					     "Duplicate channel %u\n", ch);
> +
> +		channel_mask |= BIT(ch);
> +
> +		if (fwnode_property_present(child, "output-range-microvolt")) {
> +			/*
> +			 * DT stores cells as raw 32-bit values; signed endpoints are
> +			 * encoded by dtc in two's-complement and then interpreted
> +			 * here as s32.
> +			 */
> +			ret = fwnode_property_read_u32_array(child,
> +							     "output-range-microvolt",
> +							     (u32 *)vals, ARRAY_SIZE(vals));
> +			if (ret < 0)
> +				return dev_err_probe(dev, ret,
> +						     "Failed to read range for ch %u\n",
> +						     ch);
> +
> +			range_idx = ad5529r_find_output_range(vals);
> +			if (range_idx < 0)
> +				return dev_err_probe(dev, range_idx,
> +						     "Invalid range [%d %d] for ch %u\n",
> +						     vals[0], vals[1], ch);
> +		} else {
> +			range_idx = AD5529R_RANGE_0V_5V;
> +		}
> +
> +		st->output_range_idx[ch] = range_idx;
> +		ret = regmap_write(st->regmap_16bit,
> +				   AD5529R_REG_OUT_RANGE(ch), range_idx);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Failed to configure range for ch %u\n",
> +					     ch);
> +
> +		st->channels[st->num_channels++] = AD5529R_DAC_CHANNEL(ch);
> +	}
> +
> +	return 0;
> +}
> +

> +static int ad5529r_probe(struct spi_device *spi)
> +{
> +	struct regmap_config regmap_16bit_cfg;
> +	struct regmap_config regmap_8bit_cfg;
> +	struct device *dev = &spi->dev;
> +	struct iio_dev *indio_dev;
> +	struct ad5529r_state *st;
> +	bool external_vref;
> +	u32 dev_addr = 0;
> +	int ret;
> +
> +	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
> +	if (!indio_dev)
> +		return -ENOMEM;
> +
> +	st = iio_priv(indio_dev);
> +
> +	st->model_data = spi_get_device_match_data(spi);
> +	if (!st->model_data)
> +		return dev_err_probe(dev, -ENODATA,
> +				     "Failed to identify device variant\n");
> +

Move the default value setting of dev_addr() down here.
	dev_addr = 0;

or better yet, check for presence of property
	if (device_property_present(dev, "spi-device-addr")) {
		ret = device_property_read_u32(dev, "spi-dev-addr", &dev_addr);
		if (ret < 0)
			return ret;

		if (dev_addr > 3)
			return dev_err_probe();
	} else {
		dev_addr = 0;
	}
as that gives us clean checking for corrupted properties and setting
of a default if no attempt was made ot set it to anything else.

> +	device_property_read_u32(dev, "spi-device-addr", &dev_addr);
> +	if (dev_addr > 3)
> +		return dev_err_probe(dev, -EINVAL,
> +				     "spi-device-addr %u out of range [0, 3]\n",
> +				     dev_addr);

Thanks

Jonathan

-- 
Jonathan Cameron <jonathan.cameron at oss.qualcomm.com>