[PATCH RESEND 04/17] dt-bindings: soc: spacemit: allow eDP/DP PHY PLL pixel clocks on K3 APMU

[Cody Kang]

Hi Rob,

On Fri, 07 Aug 2026 18:08:24 -0500, Rob Herring wrote:
> On Sat, Jul 25, 2026 at 12:51:13AM -0400, Cody Kang wrote:
> > The APMU's eDP pixel-clock muxes select the DP PHY PLLs as parents, so the
> > K3 syscon takes two clock inputs the other variants do not have.
> >
> > Gate them behind the K3 compatible instead of widening the shared clock
> > list, so a non-K3 syscon cannot silently accept clocks it has no mux for.
> >
> > Signed-off-by: Cody Kang <codykang.hk at gmail.com>
> > ---
> >  .../bindings/soc/spacemit/spacemit,k1-syscon.yaml  | 30 +++++++++++++++++++++-
> >  1 file changed, 29 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> > index d3a7c93c3c54..b8fc6632a392 100644
> > --- a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> > +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> > @@ -31,14 +31,18 @@ properties:
> >      maxItems: 1
> >
> >    clocks:
> > -    maxItems: 4
> > +    minItems: 4
> > +    maxItems: 6
> >
> >    clock-names:
> > +    minItems: 4
> >      items:
> >        - const: osc
> >        - const: vctcxo_1m
> >        - const: vctcxo_3m
> >        - const: vctcxo_24m
> > +      - const: edp0_pll_pxclk
> > +      - const: edp1_pll_pxclk
> >
> >    "#clock-cells":
> >      const: 1
> > @@ -95,6 +99,30 @@ allOf:
> >          - clocks
> >          - clock-names
> >          - "#clock-cells"
> > +  # Only the K3 APMU exposes the two eDP/DP PHY PLL pixel clocks as extra
> > +  # inputs (parents of its eDP pixel-clock muxes); every other variant has
> > +  # the four base oscillator inputs only.
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: spacemit,k3-syscon-apmu
> > +    then:
> > +      properties:
>
> > +        clocks:
> > +          minItems: 4
> > +          maxItems: 6
> > +        clock-names:
> > +          minItems: 4
> > +          maxItems: 6
> > +    else:
> > +      properties:
> > +        clocks:
> > +          minItems: 4
> > +          maxItems: 4
> > +        clock-names:
> > +          minItems: 4
> > +          maxItems: 4
>
> 4 is already the minimum, so it can be dropped on all of these.

Thanks for the review. Will drop them in v2.

Cody