[PATCH RESEND 04/17] dt-bindings: soc: spacemit: allow eDP/DP PHY PLL pixel clocks on K3 APMU

[Rob Herring]

On Sat, Jul 25, 2026 at 12:51:13AM -0400, Cody Kang wrote:
> The APMU's eDP pixel-clock muxes select the DP PHY PLLs as parents, so the
> K3 syscon takes two clock inputs the other variants do not have.
> 
> Gate them behind the K3 compatible instead of widening the shared clock
> list, so a non-K3 syscon cannot silently accept clocks it has no mux for.
> 
> Signed-off-by: Cody Kang <codykang.hk at gmail.com>
> ---
>  .../bindings/soc/spacemit/spacemit,k1-syscon.yaml  | 30 +++++++++++++++++++++-
>  1 file changed, 29 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> index d3a7c93c3c54..b8fc6632a392 100644
> --- a/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> +++ b/Documentation/devicetree/bindings/soc/spacemit/spacemit,k1-syscon.yaml
> @@ -31,14 +31,18 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 4
> +    minItems: 4
> +    maxItems: 6
>  
>    clock-names:
> +    minItems: 4
>      items:
>        - const: osc
>        - const: vctcxo_1m
>        - const: vctcxo_3m
>        - const: vctcxo_24m
> +      - const: edp0_pll_pxclk
> +      - const: edp1_pll_pxclk
>  
>    "#clock-cells":
>      const: 1
> @@ -95,6 +99,30 @@ allOf:
>          - clocks
>          - clock-names
>          - "#clock-cells"
> +  # Only the K3 APMU exposes the two eDP/DP PHY PLL pixel clocks as extra
> +  # inputs (parents of its eDP pixel-clock muxes); every other variant has
> +  # the four base oscillator inputs only.
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: spacemit,k3-syscon-apmu
> +    then:
> +      properties:

> +        clocks:
> +          minItems: 4
> +          maxItems: 6
> +        clock-names:
> +          minItems: 4
> +          maxItems: 6
> +    else:
> +      properties:
> +        clocks:
> +          minItems: 4
> +          maxItems: 4
> +        clock-names:
> +          minItems: 4
> +          maxItems: 4

4 is already the minimum, so it can be dropped on all of these.

Rob