[PATCH v5 3/5] clk: spacemit: Add clock support for Spacemit K1 SoC

[Yixun Lan]

Hi Haylen Chu:

On 17:57 Thu 06 Mar     , Haylen Chu wrote:
> The clock tree of K1 SoC contains three main types of clock hardware
> (PLL/DDN/MIX) and has control registers split into several multifunction
> devices: APBS (PLLs), MPMU, APBC and APMU.
> 
> All register operations are done through regmap to ensure atomiciy
> between concurrent operations of clock driver and reset,
> power-domain driver that will be introduced in the future.
> 
> Signed-off-by: Haylen Chu <heylenay at 4d2.org>
> ---
>  drivers/clk/Kconfig               |    1 +
>  drivers/clk/Makefile              |    1 +
>  drivers/clk/spacemit/Kconfig      |   20 +
>  drivers/clk/spacemit/Makefile     |    5 +
>  drivers/clk/spacemit/ccu-k1.c     | 1714 +++++++++++++++++++++++++++++
>  drivers/clk/spacemit/ccu_common.h |   47 +
>  drivers/clk/spacemit/ccu_ddn.c    |   80 ++
>  drivers/clk/spacemit/ccu_ddn.h    |   48 +
>  drivers/clk/spacemit/ccu_mix.c    |  284 +++++
>  drivers/clk/spacemit/ccu_mix.h    |  246 +++++
>  drivers/clk/spacemit/ccu_pll.c    |  146 +++
>  drivers/clk/spacemit/ccu_pll.h    |   76 ++
>  12 files changed, 2668 insertions(+)
>  create mode 100644 drivers/clk/spacemit/Kconfig
>  create mode 100644 drivers/clk/spacemit/Makefile
>  create mode 100644 drivers/clk/spacemit/ccu-k1.c
>  create mode 100644 drivers/clk/spacemit/ccu_common.h
>  create mode 100644 drivers/clk/spacemit/ccu_ddn.c
>  create mode 100644 drivers/clk/spacemit/ccu_ddn.h
>  create mode 100644 drivers/clk/spacemit/ccu_mix.c
>  create mode 100644 drivers/clk/spacemit/ccu_mix.h
>  create mode 100644 drivers/clk/spacemit/ccu_pll.c
>  create mode 100644 drivers/clk/spacemit/ccu_pll.h
> 
> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
> index 713573b6c86c..19c1ed280fd7 100644
> --- a/drivers/clk/Kconfig
> +++ b/drivers/clk/Kconfig
> @@ -517,6 +517,7 @@ source "drivers/clk/samsung/Kconfig"
>  source "drivers/clk/sifive/Kconfig"
>  source "drivers/clk/socfpga/Kconfig"
>  source "drivers/clk/sophgo/Kconfig"
> +source "drivers/clk/spacemit/Kconfig"
>  source "drivers/clk/sprd/Kconfig"
>  source "drivers/clk/starfive/Kconfig"
>  source "drivers/clk/sunxi/Kconfig"
> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
> index bf4bd45adc3a..42867cd37c33 100644
> --- a/drivers/clk/Makefile
> +++ b/drivers/clk/Makefile
> @@ -145,6 +145,7 @@ obj-$(CONFIG_COMMON_CLK_SAMSUNG)	+= samsung/
>  obj-$(CONFIG_CLK_SIFIVE)		+= sifive/
>  obj-y					+= socfpga/
>  obj-y					+= sophgo/
> +obj-y					+= spacemit/
>  obj-$(CONFIG_PLAT_SPEAR)		+= spear/
>  obj-y					+= sprd/
>  obj-$(CONFIG_ARCH_STI)			+= st/
> diff --git a/drivers/clk/spacemit/Kconfig b/drivers/clk/spacemit/Kconfig
> new file mode 100644
> index 000000000000..76090cd85668
> --- /dev/null
> +++ b/drivers/clk/spacemit/Kconfig
> @@ -0,0 +1,20 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +
> +config SPACEMIT_CCU
> +	tristate "Clock support for Spacemit SoCs"
> +	default y
similar reason to pinctrl with these patches [1], [2]
I'd suggest switch to "bool + default ARCH_SPACEMIT" 

Link: https://lore.kernel.org/all/20250218-k1-pinctrl-option-v3-1-36e031e0da1b@gentoo.org [1]
Link: https://lore.kernel.org/all/6881b8d1ad74ac780af8a974e604b5ef3f5d4aad.1742198691.git.geert+renesas@glider.be [2]

> +	depends on ARCH_SPACEMIT || COMPILE_TEST
> +	select MFD_SYSCON
> +	help
> +	  Say Y to enable clock controller unit support for Spacemit SoCs.
> +
> +if SPACEMIT_CCU
> +
> +config SPACEMIT_K1_CCU
> +	tristate "Support for Spacemit K1 SoC"
> +	default y
ditto
> +	depends on ARCH_SPACEMIT || COMPILE_TEST
> +	help
> +	  Support for clock controller unit in Spacemit K1 SoC.
> +
> +endif

-- 
Yixun Lan (dlan)
Gentoo Linux Developer
GPG Key ID AABEFD55