[PATCH 1/1] dt-bindings: serial: 8250: allow clock 'uartclk' and 'reg' for nxp,lpc1850-uart
Frank Li
Frank.Li at nxp.com
Mon Jun 2 07:27:45 PDT 2025
Allow clock 'uartclk' and 'reg' for nxp,lpc1850-uart to align existed
driver and dts. It is really old platform. Keep the same restriction for
others.
Allow dmas and dma-names property, which allow maxItems 4 because very old
platform (arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi) use duplicate "tx", "rx",
"tx", "rx" as dma-names.
Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: serial at 40081000 (nxp,lpc1850-uart): clock-names: ['uartclk', 'reg'] is too long
Signed-off-by: Frank Li <Frank.Li at nxp.com>
---
.../devicetree/bindings/serial/8250.yaml | 41 +++++++++++++++++--
1 file changed, 37 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml
index 33d2016b65090..08b8d7c6df0fd 100644
--- a/Documentation/devicetree/bindings/serial/8250.yaml
+++ b/Documentation/devicetree/bindings/serial/8250.yaml
@@ -49,6 +49,24 @@ allOf:
- required: [ clock-frequency ]
- required: [ clocks ]
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: nxp,lpc1850-uart
+ then:
+ properties:
+ clock-names:
+ items:
+ - const: uartclk
+ - const: reg
+ else:
+ properties:
+ clock-names:
+ items:
+ - const: core
+ - const: bus
+
properties:
compatible:
oneOf:
@@ -142,9 +160,22 @@ properties:
clock-names:
minItems: 1
- items:
- - const: core
- - const: bus
+ maxItems: 2
+ oneOf:
+ - items:
+ - const: core
+ - const: bus
+ - items:
+ - const: uartclk
+ - const: reg
+
+ dmas:
+ minItems: 1
+ maxItems: 4
+
+ dma-names:
+ minItems: 1
+ maxItems: 4
resets:
maxItems: 1
@@ -237,7 +268,9 @@ if:
properties:
compatible:
contains:
- const: spacemit,k1-uart
+ enum:
+ - spacemit,k1-uart
+ - nxp,lpc1850-uart
then:
required: [clock-names]
properties:
--
2.34.1
More information about the linux-riscv
mailing list