[PATCH 7/8] riscv: dts: spacemit: add initial device tree of SpacemiT K3 SoC

[Krzysztof Kozlowski]

On 16/12/2025 14:32, Guodong Xu wrote:
> SpacemiT K3 is equipped with 8 X100 cores, which are RVA23 compliant.
> Add nodes of uarts, timer and interrupt-controllers.
> 
> Signed-off-by: Guodong Xu <guodong at riscstar.com>
> ---
>  arch/riscv/boot/dts/spacemit/k3.dtsi | 529 +++++++++++++++++++++++++++++++++++
>  1 file changed, 529 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..cb27b790716fdd6dc2bc89c28dd2588a596a5af9
> --- /dev/null
> +++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
> @@ -0,0 +1,529 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2025 SpacemiT (Hangzhou) Technology Co. Ltd
> + * Copyright (c) 2025 Guodong Xu <guodong at riscstar.com>
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/dts-v1/;
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	model = "SpacemiT K3";
> +	compatible = "spacemit,k3";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		serial2 = &uart2;
> +		serial3 = &uart3;
> +		serial4 = &uart4;
> +		serial5 = &uart5;
> +		serial6 = &uart6;
> +		serial7 = &uart7;
> +		serial8 = &uart8;
> +		serial9 = &uart9;
> +		serial10 = &uart10;

These are not properties of the soc, but the board DTS.

Best regards,
Krzysztof