[PATCH v4 4/6] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants

[Anand Moon]

Hi Hal,

On Tue, 25 Nov 2025 at 13:27, Hal Feng <hal.feng at starfivetech.com> wrote:
>
> Add a common board dtsi for use by VisionFive 2 Lite and
> VisionFive 2 Lite eMMC.
>
> Acked-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>
> Tested-by: Matthias Brugger <mbrugger at suse.com>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
>  .../jh7110-starfive-visionfive-2-lite.dtsi    | 161 ++++++++++++++++++
>  1 file changed, 161 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi
> new file mode 100644
> index 000000000000..f8797a666dbf
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-lite.dtsi
> @@ -0,0 +1,161 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2025 StarFive Technology Co., Ltd.
> + * Copyright (C) 2025 Hal Feng <hal.feng at starfivetech.com>
> + */
> +
> +/dts-v1/;
> +#include "jh7110-common.dtsi"
> +
> +/ {
> +       vcc_3v3_pcie: regulator-vcc-3v3-pcie {
> +               compatible = "regulator-fixed";
> +               enable-active-high;
> +               gpio = <&sysgpio 27 GPIO_ACTIVE_HIGH>;
> +               regulator-name = "vcc_3v3_pcie";
> +               regulator-min-microvolt = <3300000>;
> +               regulator-max-microvolt = <3300000>;
> +       };
> +};

The vcc_3v3_pcie regulator node is common to all JH7110 development boards.
and it is enabled through the PWREN_H signal (PCIE0_PWREN_H_GPIO32).

VisionFive 2 Product Design Schematics below
[1] https://doc-en.rvspace.org/VisionFive2/PDF/SCH_RV002_V1.2A_20221216.pdf

Mars_Hardware_Schematics
[2] https://github.com/milkv-mars/mars-files/blob/main/Mars_Hardware_Schematics/Milk-V_Mars_SCH_V1.21_2024-0510.pdf

Thanks
-Anand