[PATCH v1] riscv: dts: starfive: disable unused csi/camss nodes

[Emil Renner Berthing]

Conor Dooley wrote:
> From: Conor Dooley <conor.dooley at microchip.com>
>
> Aurelien reported probe failures due to the csi node being enabled
> without having a camera attached to it. A camera was in the initial
> submissions, but was removed from the dts, as it had not actually been
> present on the board, but was from an addon board used by the
> developer of the relevant drivers. The non-camera pipeline nodes were
> not disabled when this happened and the probe failures are problematic
> for Debian. Disable them.
>
> CC: stable at vger.kernel.org
> Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
> Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@aurel32.net/
> Reported-by: Aurelien Jarno <aurelien at aurel32.net>
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>

Thanks!

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

> ---
> CC: Emil Renner Berthing <kernel at esmil.dk>
> CC: Rob Herring <robh at kernel.org>
> CC: Krzysztof Kozlowski <krzk+dt at kernel.org>
> CC: Conor Dooley <conor+dt at kernel.org>
> CC: Changhuang Liang <changhuang.liang at starfivetech.com>
> CC: devicetree at vger.kernel.org
> CC: linux-riscv at lists.infradead.org
> CC: linux-kernel at vger.kernel.org
> ---
>  arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index c7771b3b64758..d6c55f1cc96a9 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -128,7 +128,6 @@ &camss {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
>  			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
>  	assigned-clock-rates = <49500000>, <198000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> @@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
>  &csi2rx {
>  	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
>  	assigned-clock-rates = <297000000>;
> -	status = "okay";
>
>  	ports {
>  		#address-cells = <1>;
> --
> 2.45.2
>