[PATCH v4 1/3] riscv: dts: starfive: Enable axp15060 pmic for cpufreq

Tue Mar 5 08:35:02 PST 2024

Hi Bo,

Since commit b2cb2ae22278f1918f7526b89760ee00b4a81393 ("mfd: axp20x:
Generalise handling without interrupt"), the "interrupts = <0>;" line
can be removed. It was kept to fix a driver issue that driver would try
to find an IRQ line for power button function of the PMIC.

I'll send a patch to fix it.

Best Regards,
Shengyu

在 2024/3/5 16:23, Bo Gan 写道:
> On 6/6/23 3:56 AM, Mason Huo wrote:
>> The VisionFive 2 board has an embedded pmic axp15060,
>> which supports the cpu DVFS through the dcdc2 regulator.
>> This patch enables axp15060 pmic and configs the dcdc2.
>>
>> Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
>> ---
>>   .../starfive/jh7110-starfive-visionfive-2.dtsi  | 17 +++++++++++++++++
>>   1 file changed, 17 insertions(+)
>>
>> diff --git 
>> a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi 
>> b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index 2a6d81609284..9714da5550d7 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -114,6 +114,23 @@ &i2c5 {
>>       pinctrl-names = "default";
>>       pinctrl-0 = <&i2c5_pins>;
>>       status = "okay";
>> +
>> +    axp15060: pmic at 36 {
>> +        compatible = "x-powers,axp15060";
>> +        reg = <0x36>;
>> +        interrupts = <0>;
>> +        interrupt-controller;
> 
> This appears to be wrong. I'm working on a private tree of OpenSBI, 
> where I validate
> all PLIC SYS/AON/STG CRG/SYSCON/IOMUX, and other devices... register 
> reads/writes.
> Looks like this `interrupts = <0>` will cause the kernel code (my 
> vanilla 6.6 tree)
> to enable interrupt 0 on PLIC, which is wrong. Of course, you won't see 
> this problem
> if you run upstream OpenSBI, where all writes to PLIC are permitted. I 
> assume PLIC
> will ignore this request to enable irq 0. Still, this is wrong. Can 
> someone from
> Starfive take this issue? Attaching the backtrace here:
> 
> # This line is from my OpenSBI
> jh7110_virt_plic_write: U7 refusing to enable interrupt 0
> # After this, I'll inject a memory access (write) fault to S mode
> 
> # Below is from Linux
> Oops - store (or AMO) access fault [#1]
> Modules linked in:
> CPU: 0 PID: 62 Comm: kworker/u9:2 Not tainted 6.6.0-gc3eb9993b167 #14
> Hardware name: StarFive VisionFive 2 v1.3B (DT)
> Workqueue: events_unbound deferred_probe_work_func
> epc : plic_irq_enable+0xd2/0x15e
>   ra : plic_irq_enable+0xa8/0x15e
> epc : ffffffff804650bc ra : ffffffff80465092 sp : ffffffc8003f34c0
>   gp : ffffffff816d2290 tp : ffffffd802411f80 t0 : ffffffc8003f3010
>   t1 : 0000000000000001 t2 : 0000000000000003 s0 : ffffffc8003f3530
>   s1 : ffffffd801eaee30 a0 : ffffffd8bff835b0 a1 : 000000000000001e
>   a2 : 0000000000000004 a3 : ffffffd801eaee00 a4 : 000000000000001e
>   a5 : ffffffc804002100 a6 : 0000000000000000 a7 : 00000000000007ad
>   s2 : ffffffff80ede5a0 s3 : 0000000000000001 s4 : 000000000000ffff
>   s5 : 00000000ffffffff s6 : 0000000000000000 s7 : 000000000000001f
>   s8 : ffffffff81707af0 s9 : ffffffff80eda688 s10: ffffffd801eaee00
>   s11: ffffffd8bff835a0 t3 : ffffffff816d3420 t4 : 0000000000000002
>   t5 : 0000000000000000 t6 : 0000000000000000
> status: 0000000200000100 badaddr: ffffffc804002100 cause: 0000000000000007
> [<ffffffff804650bc>] plic_irq_enable+0xd2/0x15e
> [<ffffffff800649e6>] irq_enable+0x2c/0x64
> [<ffffffff80064a76>] __irq_startup+0x58/0x60
> [<ffffffff80064ada>] irq_startup+0x5c/0x14e
> [<ffffffff800621f4>] __setup_irq+0x582/0x644
> [<ffffffff80062368>] request_threaded_irq+0xb2/0x154
> [<ffffffff8055571a>] regmap_add_irq_chip_fwnode+0x6fe/0x8f2
> [<ffffffff80555944>] regmap_add_irq_chip+0x36/0x4a
> [<ffffffff8055cb1e>] axp20x_device_probe+0x36/0x114
> [<ffffffff8055cce6>] axp20x_i2c_probe+0x6c/0xa0
> [<ffffffff8063a8f0>] i2c_device_probe+0x11c/0x23e
> [<ffffffff80533464>] really_probe+0x86/0x23e
> [<ffffffff80533678>] __driver_probe_device+0x5c/0xda
> [<ffffffff80533722>] driver_probe_device+0x2c/0xf8
> [<ffffffff8053385c>] __device_attach_driver+0x6e/0xd0
> [<ffffffff80531a2c>] bus_for_each_drv+0x5a/0x9a
> [<ffffffff80533ba0>] __device_attach+0x78/0x116
> [<ffffffff80533db6>] device_initial_probe+0xe/0x16
> [<ffffffff80532722>] bus_probe_device+0x86/0x88
> [<ffffffff8053034a>] device_add+0x3b2/0x552
> [<ffffffff80530500>] device_register+0x16/0x20
> [<ffffffff8063bb54>] i2c_new_client_device+0x14e/0x214
> [<ffffffff8063d9ae>] of_i2c_register_devices+0xa2/0xf8
> [<ffffffff8063c246>] i2c_register_adapter+0x130/0x32e
> [<ffffffff8063c49e>] __i2c_add_numbered_adapter+0x5a/0x86
> [<ffffffff8063c55a>] i2c_add_adapter+0x90/0xb4
> [<ffffffff8063c62e>] i2c_add_numbered_adapter+0x22/0x2a
> [<ffffffff8063fd34>] i2c_dw_probe_master+0x288/0x304
> [<ffffffff806409c4>] dw_i2c_plat_probe+0x288/0x37e
> [<ffffffff80535946>] platform_probe+0x4e/0xa6
> [<ffffffff80533464>] really_probe+0x86/0x23e
> [<ffffffff80533678>] __driver_probe_device+0x5c/0xda
> [<ffffffff80533722>] driver_probe_device+0x2c/0xf8
> [<ffffffff8053385c>] __device_attach_driver+0x6e/0xd0
> [<ffffffff80531a2c>] bus_for_each_drv+0x5a/0x9a
> [<ffffffff80533ba0>] __device_attach+0x78/0x116
> [<ffffffff80533db6>] device_initial_probe+0xe/0x16
> [<ffffffff80532722>] bus_probe_device+0x86/0x88
> [<ffffffff80532b86>] deferred_probe_work_func+0x70/0xa6
> [<ffffffff800238c2>] process_one_work+0x14a/0x23a
> [<ffffffff80024760>] worker_thread+0x314/0x450
> [<ffffffff8002be5a>] kthread+0x9a/0xae
> [<ffffffff8000248a>] ret_from_fork+0xa/0x1c
> Code: 97ba 000f 0140 4398 000f 08a0 9bbb 0179 ebb3 00eb (a023) 0177
> ---[ end trace 0000000000000000 ]---
> 
> 
>> +        #interrupt-cells = <1>;
>> +
>> +        regulators {
>> +            vdd_cpu: dcdc2 {
>> +                regulator-always-on;
>> +                regulator-min-microvolt = <500000>;
>> +                regulator-max-microvolt = <1540000>;
>> +                regulator-name = "vdd-cpu";
>> +            };
>> +        };
>> +    };
>>   };
>>   &i2c6 {
>>
> 
> Bo
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xE3520CC91929C8E7.asc
Type: application/pgp-keys
Size: 6868 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240306/66c00ce6/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature.asc
Type: application/pgp-signature
Size: 840 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20240306/66c00ce6/attachment.sig>