[PATCH v4 1/3] riscv: dts: starfive: Enable axp15060 pmic for cpufreq

[Bo Gan]

On 6/6/23 3:56 AM, Mason Huo wrote:
> The VisionFive 2 board has an embedded pmic axp15060,
> which supports the cpu DVFS through the dcdc2 regulator.
> This patch enables axp15060 pmic and configs the dcdc2.
> 
> Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
> ---
>   .../starfive/jh7110-starfive-visionfive-2.dtsi  | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 2a6d81609284..9714da5550d7 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -114,6 +114,23 @@ &i2c5 {
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&i2c5_pins>;
>   	status = "okay";
> +
> +	axp15060: pmic at 36 {
> +		compatible = "x-powers,axp15060";
> +		reg = <0x36>;
> +		interrupts = <0>;
> +		interrupt-controller;

This appears to be wrong. I'm working on a private tree of OpenSBI, where I validate
all PLIC SYS/AON/STG CRG/SYSCON/IOMUX, and other devices... register reads/writes.
Looks like this `interrupts = <0>` will cause the kernel code (my vanilla 6.6 tree)
to enable interrupt 0 on PLIC, which is wrong. Of course, you won't see this problem
if you run upstream OpenSBI, where all writes to PLIC are permitted. I assume PLIC
will ignore this request to enable irq 0. Still, this is wrong. Can someone from
Starfive take this issue? Attaching the backtrace here:

# This line is from my OpenSBI
jh7110_virt_plic_write: U7 refusing to enable interrupt 0
# After this, I'll inject a memory access (write) fault to S mode

# Below is from Linux
Oops - store (or AMO) access fault [#1]
Modules linked in:
CPU: 0 PID: 62 Comm: kworker/u9:2 Not tainted 6.6.0-gc3eb9993b167 #14
Hardware name: StarFive VisionFive 2 v1.3B (DT)
Workqueue: events_unbound deferred_probe_work_func
epc : plic_irq_enable+0xd2/0x15e
  ra : plic_irq_enable+0xa8/0x15e
epc : ffffffff804650bc ra : ffffffff80465092 sp : ffffffc8003f34c0
  gp : ffffffff816d2290 tp : ffffffd802411f80 t0 : ffffffc8003f3010
  t1 : 0000000000000001 t2 : 0000000000000003 s0 : ffffffc8003f3530
  s1 : ffffffd801eaee30 a0 : ffffffd8bff835b0 a1 : 000000000000001e
  a2 : 0000000000000004 a3 : ffffffd801eaee00 a4 : 000000000000001e
  a5 : ffffffc804002100 a6 : 0000000000000000 a7 : 00000000000007ad
  s2 : ffffffff80ede5a0 s3 : 0000000000000001 s4 : 000000000000ffff
  s5 : 00000000ffffffff s6 : 0000000000000000 s7 : 000000000000001f
  s8 : ffffffff81707af0 s9 : ffffffff80eda688 s10: ffffffd801eaee00
  s11: ffffffd8bff835a0 t3 : ffffffff816d3420 t4 : 0000000000000002
  t5 : 0000000000000000 t6 : 0000000000000000
status: 0000000200000100 badaddr: ffffffc804002100 cause: 0000000000000007
[<ffffffff804650bc>] plic_irq_enable+0xd2/0x15e
[<ffffffff800649e6>] irq_enable+0x2c/0x64
[<ffffffff80064a76>] __irq_startup+0x58/0x60
[<ffffffff80064ada>] irq_startup+0x5c/0x14e
[<ffffffff800621f4>] __setup_irq+0x582/0x644
[<ffffffff80062368>] request_threaded_irq+0xb2/0x154
[<ffffffff8055571a>] regmap_add_irq_chip_fwnode+0x6fe/0x8f2
[<ffffffff80555944>] regmap_add_irq_chip+0x36/0x4a
[<ffffffff8055cb1e>] axp20x_device_probe+0x36/0x114
[<ffffffff8055cce6>] axp20x_i2c_probe+0x6c/0xa0
[<ffffffff8063a8f0>] i2c_device_probe+0x11c/0x23e
[<ffffffff80533464>] really_probe+0x86/0x23e
[<ffffffff80533678>] __driver_probe_device+0x5c/0xda
[<ffffffff80533722>] driver_probe_device+0x2c/0xf8
[<ffffffff8053385c>] __device_attach_driver+0x6e/0xd0
[<ffffffff80531a2c>] bus_for_each_drv+0x5a/0x9a
[<ffffffff80533ba0>] __device_attach+0x78/0x116
[<ffffffff80533db6>] device_initial_probe+0xe/0x16
[<ffffffff80532722>] bus_probe_device+0x86/0x88
[<ffffffff8053034a>] device_add+0x3b2/0x552
[<ffffffff80530500>] device_register+0x16/0x20
[<ffffffff8063bb54>] i2c_new_client_device+0x14e/0x214
[<ffffffff8063d9ae>] of_i2c_register_devices+0xa2/0xf8
[<ffffffff8063c246>] i2c_register_adapter+0x130/0x32e
[<ffffffff8063c49e>] __i2c_add_numbered_adapter+0x5a/0x86
[<ffffffff8063c55a>] i2c_add_adapter+0x90/0xb4
[<ffffffff8063c62e>] i2c_add_numbered_adapter+0x22/0x2a
[<ffffffff8063fd34>] i2c_dw_probe_master+0x288/0x304
[<ffffffff806409c4>] dw_i2c_plat_probe+0x288/0x37e
[<ffffffff80535946>] platform_probe+0x4e/0xa6
[<ffffffff80533464>] really_probe+0x86/0x23e
[<ffffffff80533678>] __driver_probe_device+0x5c/0xda
[<ffffffff80533722>] driver_probe_device+0x2c/0xf8
[<ffffffff8053385c>] __device_attach_driver+0x6e/0xd0
[<ffffffff80531a2c>] bus_for_each_drv+0x5a/0x9a
[<ffffffff80533ba0>] __device_attach+0x78/0x116
[<ffffffff80533db6>] device_initial_probe+0xe/0x16
[<ffffffff80532722>] bus_probe_device+0x86/0x88
[<ffffffff80532b86>] deferred_probe_work_func+0x70/0xa6
[<ffffffff800238c2>] process_one_work+0x14a/0x23a
[<ffffffff80024760>] worker_thread+0x314/0x450
[<ffffffff8002be5a>] kthread+0x9a/0xae
[<ffffffff8000248a>] ret_from_fork+0xa/0x1c
Code: 97ba 000f 0140 4398 000f 08a0 9bbb 0179 ebb3 00eb (a023) 0177
---[ end trace 0000000000000000 ]---


> +		#interrupt-cells = <1>;
> +
> +		regulators {
> +			vdd_cpu: dcdc2 {
> +				regulator-always-on;
> +				regulator-min-microvolt = <500000>;
> +				regulator-max-microvolt = <1540000>;
> +				regulator-name = "vdd-cpu";
> +			};
> +		};
> +	};
>   };
>   
>   &i2c6 {
> 

Bo