[PATCH v3 1/3] dt-bindings: iio: adc: sophgo,cv18xx-saradc.yaml: Add Sophgo SARADC binding documentation

[Krzysztof Kozlowski]

On 31/07/2024 14:24, Thomas Bonnefille wrote:
> The Sophgo SARADC is a Successive Approximation ADC that can be found in
> the Sophgo SoC.
> 
> Signed-off-by: Thomas Bonnefille <thomas.bonnefille at bootlin.com>

A nit, subject: drop second/last, redundant "binding documentation". The
"dt-bindings" prefix is already stating that these are bindings and this
is documentation. Cannot be anything else.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18


> ---
>  .../bindings/iio/adc/sophgo,cv18xx-saradc.yaml     | 48 ++++++++++++++++++++++
>  1 file changed, 48 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/sophgo,cv18xx-saradc.yaml b/Documentation/devicetree/bindings/iio/adc/sophgo,cv18xx-saradc.yaml
> new file mode 100644
> index 000000000000..79d8cb52279f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/sophgo,cv18xx-saradc.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/sophgo,cv18xx-saradc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title:
> +  Sophgo CV18XX SoC series 3 channels Successive Approximation Analog to
> +  Digital Converters
> +
> +maintainers:
> +  - Thomas Bonnefille <thomas.bonnefille at bootlin.com>
> +
> +description:
> +  Datasheet at https://github.com/sophgo/sophgo-doc/releases
> +
> +properties:
> +  compatible:
> +    oneOf:

Drop

> +      - items:

Drop, use const directly.


> +          - const: sophgo,cv1800b-saradc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +required:
> +  - clocks
> +  - compatible
> +  - reg

Odd order. compatible is always first. Anyway, list here has the same
order as "properties:".

> +
> +unevaluatedProperties: false

I don't see any other $ref. Don't you miss adc.yaml? Or channels? Or
some more properties? This looks incomplete for ADC.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/sophgo,cv1800.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    adc at 30f0000 {
> +        compatible = "sophgo,cv1800b-saradc";
> +        clocks = <&clk CLK_SARADC>;
> +        interrupts = <100 IRQ_TYPE_LEVEL_HIGH>;
> +        reg = <0x030F0000 0x1000>;

Hex is *always* lower case, see DTS coding style.

Order the properties correctly, so again, please read DTS coding style.

> +    };
> 

Best regards,
Krzysztof