[PATCH 1/7] dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.
Inochi Amaoto
inochiama at outlook.com
Thu Jul 11 17:36:14 PDT 2024
On Mon, Jul 08, 2024 at 10:29:48AM GMT, Rob Herring wrote:
> On Thu, Jul 04, 2024 at 01:46:37PM +0800, Inochi Amaoto wrote:
> > Add pinctrl support for Sophgo CV1800 series SoC.
> >
> > Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> > ---
> > .../pinctrl/sophgo,cv1800-pinctrl.yaml | 120 +++++++++++++++++
> > include/dt-bindings/pinctrl/pinctrl-cv1800b.h | 63 +++++++++
> > include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
> > include/dt-bindings/pinctrl/pinctrl-cv18xx.h | 19 +++
> > include/dt-bindings/pinctrl/pinctrl-sg2000.h | 127 ++++++++++++++++++
> > include/dt-bindings/pinctrl/pinctrl-sg2002.h | 79 +++++++++++
> > 6 files changed, 535 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
> > create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> > new file mode 100644
> > index 000000000000..b7e4084b78d6
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> > @@ -0,0 +1,120 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo CV1800 Pin Controller
> > +
> > +maintainers:
> > + - Inochi Amaoto <inochiama at outlook.com>
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - sophgo,cv1800b-pinctrl
> > + - sophgo,cv1812h-pinctrl
> > + - sophgo,sg2000-pinctrl
> > + - sophgo,sg2002-pinctrl
> > +
> > + reg:
> > + items:
> > + - description: pinctrl for system domain
> > + - description: pinctrl for rtc domain
>
> Based on the example's addresses, this isn't 1 block, but 2 blocks. Is
> this really 1 block, 2 instances of the same block, or 2 different
> blocks?
>
It is 2 blocks. According to its document, the pin configuration
is cross referenced.
> > +
> > + reg-names:
> > + items:
> > + - const: sys
> > + - const: rtc
> > +
> > + resets:
> > + maxItems: 1
> > +
> > +patternProperties:
> > + '-cfg$':
> > + type: object
> > + patternProperties:
> > + '-pins$':
> > + type: object
> > + description: |
> > + A pinctrl node should contain at least one subnode representing the
>
> It's the '-cfg' node that 'should contain at least one subnode', not
> this node.
>
Thanks, I will update the description.
> > + pinctrl groups available on the machine. Each subnode will list the
> > + pins it needs, and how they should be configured, with regard to
> > + muxer configuration, bias, input enable/disable, input schmitt
> > + trigger enable/disable, slew-rate and drive strength.
> > + $ref: /schemas/pinctrl/pincfg-node.yaml
> > +
> > + properties:
> > + pinmux:
> > + description: |
> > + The list of GPIOs and their mux settings that properties in the
> > + node apply to. This should be set using the GPIOMUX or GPIOMUX2
> > + macro.
> > + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
> > +
> > + bias-pull-up:
> > + type: boolean
> > +
> > + bias-pull-down:
> > + type: boolean
> > +
> > + drive-strength:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 0
> > + maximum: 7
> > +
> > + input-schmitt:
> > + $ref: /schemas/types.yaml#/definitions/uint32
> > + minimum: 0
> > + maximum: 7
> > +
> > + slew-rate:
> > + enum: [ 0, 1 ]
> > +
> > + sophgo,bus-holder:
> > + description: enable bus holder
> > + type: boolean
> > +
> > + additionalProperties: false
> > +
> > + additionalProperties: false
>
> In the indented cases, put these before properties or patternProperties.
>
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - reg-names
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
> > +
> > + soc {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + pinctrl at 3001000 {
> > + compatible = "sophgo,cv1800b-pinctrl";
> > + reg = <0x03001000 0x1000>,
> > + <0x05027000 0x1000>;
> > + reg-names = "sys", "rtc";
> > +
> > + uart0_cfg: uart0-cfg {
> > + uart0-pins {
> > + pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> > + <PINMUX(PIN_UART0_RX, 0)>;
> > + bias-pull-up;
> > + drive-strength = <2>;
> > + slew-rate = <0>;
> > + };
> > + };
> > + };
> > +
> > + uart0 {
> > + pinctrl-0 = <&uart0_cfg>;
> > + pinctrl-names = "default";
>
> Not a complete node. Plus the examples for a provider don't show the
> consumer side and vice-versa. So drop the node.
>
> > + };
> > + };
> > +
> > +...
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1800b.h b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> > new file mode 100644
> > index 000000000000..0593fc33d470
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> > @@ -0,0 +1,63 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
> > +#define _DT_BINDINGS_PINCTRL_CV1800B_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PIN_AUD_AOUTR 1
> > +#define PIN_SD0_CLK 3
> > +#define PIN_SD0_CMD 4
> > +#define PIN_SD0_D0 5
> > +#define PIN_SD0_D1 7
> > +#define PIN_SD0_D2 8
> > +#define PIN_SD0_D3 9
> > +#define PIN_SD0_CD 11
> > +#define PIN_SD0_PWR_EN 12
> > +#define PIN_SPK_EN 14
> > +#define PIN_UART0_TX 15
> > +#define PIN_UART0_RX 16
> > +#define PIN_SPINOR_HOLD_X 17
> > +#define PIN_SPINOR_SCK 18
> > +#define PIN_SPINOR_MOSI 19
> > +#define PIN_SPINOR_WP_X 20
> > +#define PIN_SPINOR_MISO 21
> > +#define PIN_SPINOR_CS_X 22
> > +#define PIN_IIC0_SCL 23
> > +#define PIN_IIC0_SDA 24
> > +#define PIN_AUX0 25
> > +#define PIN_PWR_VBAT_DET 30
> > +#define PIN_PWR_SEQ2 31
> > +#define PIN_XTAL_XIN 33
> > +#define PIN_SD1_GPIO0 35
> > +#define PIN_SD1_GPIO1 36
> > +#define PIN_SD1_D3 38
> > +#define PIN_SD1_D2 39
> > +#define PIN_SD1_D1 40
> > +#define PIN_SD1_D0 41
> > +#define PIN_SD1_CMD 42
> > +#define PIN_SD1_CLK 43
> > +#define PIN_ADC1 44
> > +#define PIN_USB_VBUS_DET 45
> > +#define PIN_ETH_TXP 47
> > +#define PIN_ETH_TXM 48
> > +#define PIN_ETH_RXP 49
> > +#define PIN_ETH_RXM 50
> > +#define PIN_MIPIRX4N 56
> > +#define PIN_MIPIRX4P 57
> > +#define PIN_MIPIRX3N 58
> > +#define PIN_MIPIRX3P 59
> > +#define PIN_MIPIRX2N 60
> > +#define PIN_MIPIRX2P 61
> > +#define PIN_MIPIRX1N 62
> > +#define PIN_MIPIRX1P 63
> > +#define PIN_MIPIRX0N 64
> > +#define PIN_MIPIRX0P 65
> > +#define PIN_AUD_AINL_MIC 67
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1812h.h b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> > new file mode 100644
> > index 000000000000..2908de347919
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> > @@ -0,0 +1,127 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
> > +#define _DT_BINDINGS_PINCTRL_CV1812H_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PINPOS(row, col) \
> > + ((((row) - 'A' + 1) << 8) + ((col) - 1))
> > +
> > +#define PIN_MIPI_TXM4 PINPOS('A', 2)
> > +#define PIN_MIPIRX0N PINPOS('A', 4)
> > +#define PIN_MIPIRX3P PINPOS('A', 6)
> > +#define PIN_MIPIRX4P PINPOS('A', 7)
> > +#define PIN_VIVO_D2 PINPOS('A', 9)
> > +#define PIN_VIVO_D3 PINPOS('A', 10)
> > +#define PIN_VIVO_D10 PINPOS('A', 12)
> > +#define PIN_USB_VBUS_DET PINPOS('A', 13)
> > +#define PIN_MIPI_TXP3 PINPOS('B', 1)
> > +#define PIN_MIPI_TXM3 PINPOS('B', 2)
> > +#define PIN_MIPI_TXP4 PINPOS('B', 3)
> > +#define PIN_MIPIRX0P PINPOS('B', 4)
> > +#define PIN_MIPIRX1N PINPOS('B', 5)
> > +#define PIN_MIPIRX2N PINPOS('B', 6)
> > +#define PIN_MIPIRX4N PINPOS('B', 7)
> > +#define PIN_MIPIRX5N PINPOS('B', 8)
> > +#define PIN_VIVO_D1 PINPOS('B', 9)
> > +#define PIN_VIVO_D5 PINPOS('B', 10)
> > +#define PIN_VIVO_D7 PINPOS('B', 11)
> > +#define PIN_VIVO_D9 PINPOS('B', 12)
> > +#define PIN_USB_ID PINPOS('B', 13)
> > +#define PIN_ETH_RXM PINPOS('B', 15)
> > +#define PIN_MIPI_TXP2 PINPOS('C', 1)
> > +#define PIN_MIPI_TXM2 PINPOS('C', 2)
> > +#define PIN_CAM_PD0 PINPOS('C', 3)
> > +#define PIN_CAM_MCLK0 PINPOS('C', 4)
> > +#define PIN_MIPIRX1P PINPOS('C', 5)
> > +#define PIN_MIPIRX2P PINPOS('C', 6)
> > +#define PIN_MIPIRX3N PINPOS('C', 7)
> > +#define PIN_MIPIRX5P PINPOS('C', 8)
> > +#define PIN_VIVO_CLK PINPOS('C', 9)
> > +#define PIN_VIVO_D6 PINPOS('C', 10)
> > +#define PIN_VIVO_D8 PINPOS('C', 11)
> > +#define PIN_USB_VBUS_EN PINPOS('C', 12)
> > +#define PIN_ETH_RXP PINPOS('C', 14)
> > +#define PIN_GPIO_RTX PINPOS('C', 15)
> > +#define PIN_MIPI_TXP1 PINPOS('D', 1)
> > +#define PIN_MIPI_TXM1 PINPOS('D', 2)
> > +#define PIN_CAM_MCLK1 PINPOS('D', 3)
> > +#define PIN_IIC3_SCL PINPOS('D', 4)
> > +#define PIN_VIVO_D4 PINPOS('D', 10)
> > +#define PIN_ETH_TXM PINPOS('D', 14)
> > +#define PIN_ETH_TXP PINPOS('D', 15)
> > +#define PIN_MIPI_TXP0 PINPOS('E', 1)
> > +#define PIN_MIPI_TXM0 PINPOS('E', 2)
> > +#define PIN_CAM_PD1 PINPOS('E', 4)
> > +#define PIN_CAM_RST0 PINPOS('E', 5)
> > +#define PIN_VIVO_D0 PINPOS('E', 10)
> > +#define PIN_ADC1 PINPOS('E', 13)
> > +#define PIN_ADC2 PINPOS('E', 14)
> > +#define PIN_ADC3 PINPOS('E', 15)
> > +#define PIN_AUD_AOUTL PINPOS('F', 2)
> > +#define PIN_IIC3_SDA PINPOS('F', 4)
> > +#define PIN_SD1_D2 PINPOS('F', 14)
> > +#define PIN_AUD_AOUTR PINPOS('G', 2)
> > +#define PIN_SD1_D3 PINPOS('G', 13)
> > +#define PIN_SD1_CLK PINPOS('G', 14)
> > +#define PIN_SD1_CMD PINPOS('G', 15)
> > +#define PIN_AUD_AINL_MIC PINPOS('H', 1)
> > +#define PIN_RSTN PINPOS('H', 12)
> > +#define PIN_PWM0_BUCK PINPOS('H', 13)
> > +#define PIN_SD1_D1 PINPOS('H', 14)
> > +#define PIN_SD1_D0 PINPOS('H', 15)
> > +#define PIN_AUD_AINR_MIC PINPOS('J', 1)
> > +#define PIN_IIC2_SCL PINPOS('J', 13)
> > +#define PIN_IIC2_SDA PINPOS('J', 14)
> > +#define PIN_SD0_CD PINPOS('K', 2)
> > +#define PIN_SD0_D1 PINPOS('K', 3)
> > +#define PIN_UART2_RX PINPOS('K', 13)
> > +#define PIN_UART2_CTS PINPOS('K', 14)
> > +#define PIN_UART2_TX PINPOS('K', 15)
> > +#define PIN_SD0_CLK PINPOS('L', 1)
> > +#define PIN_SD0_D0 PINPOS('L', 2)
> > +#define PIN_SD0_CMD PINPOS('L', 3)
> > +#define PIN_CLK32K PINPOS('L', 14)
> > +#define PIN_UART2_RTS PINPOS('L', 15)
> > +#define PIN_SD0_D3 PINPOS('M', 1)
> > +#define PIN_SD0_D2 PINPOS('M', 2)
> > +#define PIN_UART0_RX PINPOS('M', 4)
> > +#define PIN_UART0_TX PINPOS('M', 5)
> > +#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
> > +#define PIN_PWR_ON PINPOS('M', 11)
> > +#define PIN_PWR_GPIO2 PINPOS('M', 12)
> > +#define PIN_PWR_GPIO0 PINPOS('M', 13)
> > +#define PIN_CLK25M PINPOS('M', 14)
> > +#define PIN_SD0_PWR_EN PINPOS('N', 1)
> > +#define PIN_SPK_EN PINPOS('N', 3)
> > +#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
> > +#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
> > +#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
> > +#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
> > +#define PIN_PWR_GPIO1 PINPOS('N', 13)
> > +#define PIN_EMMC_DAT3 PINPOS('P', 1)
> > +#define PIN_EMMC_DAT0 PINPOS('P', 2)
> > +#define PIN_EMMC_DAT2 PINPOS('P', 3)
> > +#define PIN_EMMC_RSTN PINPOS('P', 4)
> > +#define PIN_AUX0 PINPOS('P', 5)
> > +#define PIN_IIC0_SDA PINPOS('P', 6)
> > +#define PIN_PWR_SEQ3 PINPOS('P', 10)
> > +#define PIN_PWR_VBAT_DET PINPOS('P', 11)
> > +#define PIN_PWR_SEQ1 PINPOS('P', 12)
> > +#define PIN_PWR_BUTTON1 PINPOS('P', 13)
> > +#define PIN_EMMC_DAT1 PINPOS('R', 2)
> > +#define PIN_EMMC_CMD PINPOS('R', 3)
> > +#define PIN_EMMC_CLK PINPOS('R', 4)
> > +#define PIN_IIC0_SCL PINPOS('R', 6)
> > +#define PIN_GPIO_ZQ PINPOS('R', 10)
> > +#define PIN_PWR_RSTN PINPOS('R', 11)
> > +#define PIN_PWR_SEQ2 PINPOS('R', 12)
> > +#define PIN_XTAL_XIN PINPOS('R', 13)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-cv18xx.h b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> > new file mode 100644
> > index 000000000000..bc92ad1067ec
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> > @@ -0,0 +1,19 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2023 Sophgo Ltd.
> > + *
> > + * Author: Inochi Amaoto <inochiama at outlook.com>
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
> > +#define _DT_BINDINGS_PINCTRL_CV18XX_H
> > +
> > +#define PIN_MUX_INVALD 0xff
> > +
> > +#define PINMUX2(pin, mux, mux2) \
> > + (((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
> > +
> > +#define PINMUX(pin, mux) \
> > + PINMUX2(pin, mux, PIN_MUX_INVALD)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2000.h b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> > new file mode 100644
> > index 000000000000..4871f9a7c6c1
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> > @@ -0,0 +1,127 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
> > +#define _DT_BINDINGS_PINCTRL_SG2000_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PINPOS(row, col) \
> > + ((((row) - 'A' + 1) << 8) + ((col) - 1))
> > +
> > +#define PIN_MIPI_TXM4 PINPOS('A', 2)
> > +#define PIN_MIPIRX0N PINPOS('A', 4)
> > +#define PIN_MIPIRX3P PINPOS('A', 6)
> > +#define PIN_MIPIRX4P PINPOS('A', 7)
> > +#define PIN_VIVO_D2 PINPOS('A', 9)
> > +#define PIN_VIVO_D3 PINPOS('A', 10)
> > +#define PIN_VIVO_D10 PINPOS('A', 12)
> > +#define PIN_USB_VBUS_DET PINPOS('A', 13)
> > +#define PIN_MIPI_TXP3 PINPOS('B', 1)
> > +#define PIN_MIPI_TXM3 PINPOS('B', 2)
> > +#define PIN_MIPI_TXP4 PINPOS('B', 3)
> > +#define PIN_MIPIRX0P PINPOS('B', 4)
> > +#define PIN_MIPIRX1N PINPOS('B', 5)
> > +#define PIN_MIPIRX2N PINPOS('B', 6)
> > +#define PIN_MIPIRX4N PINPOS('B', 7)
> > +#define PIN_MIPIRX5N PINPOS('B', 8)
> > +#define PIN_VIVO_D1 PINPOS('B', 9)
> > +#define PIN_VIVO_D5 PINPOS('B', 10)
> > +#define PIN_VIVO_D7 PINPOS('B', 11)
> > +#define PIN_VIVO_D9 PINPOS('B', 12)
> > +#define PIN_USB_ID PINPOS('B', 13)
> > +#define PIN_ETH_RXM PINPOS('B', 15)
> > +#define PIN_MIPI_TXP2 PINPOS('C', 1)
> > +#define PIN_MIPI_TXM2 PINPOS('C', 2)
> > +#define PIN_CAM_PD0 PINPOS('C', 3)
> > +#define PIN_CAM_MCLK0 PINPOS('C', 4)
> > +#define PIN_MIPIRX1P PINPOS('C', 5)
> > +#define PIN_MIPIRX2P PINPOS('C', 6)
> > +#define PIN_MIPIRX3N PINPOS('C', 7)
> > +#define PIN_MIPIRX5P PINPOS('C', 8)
> > +#define PIN_VIVO_CLK PINPOS('C', 9)
> > +#define PIN_VIVO_D6 PINPOS('C', 10)
> > +#define PIN_VIVO_D8 PINPOS('C', 11)
> > +#define PIN_USB_VBUS_EN PINPOS('C', 12)
> > +#define PIN_ETH_RXP PINPOS('C', 14)
> > +#define PIN_GPIO_RTX PINPOS('C', 15)
> > +#define PIN_MIPI_TXP1 PINPOS('D', 1)
> > +#define PIN_MIPI_TXM1 PINPOS('D', 2)
> > +#define PIN_CAM_MCLK1 PINPOS('D', 3)
> > +#define PIN_IIC3_SCL PINPOS('D', 4)
> > +#define PIN_VIVO_D4 PINPOS('D', 10)
> > +#define PIN_ETH_TXM PINPOS('D', 14)
> > +#define PIN_ETH_TXP PINPOS('D', 15)
> > +#define PIN_MIPI_TXP0 PINPOS('E', 1)
> > +#define PIN_MIPI_TXM0 PINPOS('E', 2)
> > +#define PIN_CAM_PD1 PINPOS('E', 4)
> > +#define PIN_CAM_RST0 PINPOS('E', 5)
> > +#define PIN_VIVO_D0 PINPOS('E', 10)
> > +#define PIN_ADC1 PINPOS('E', 13)
> > +#define PIN_ADC2 PINPOS('E', 14)
> > +#define PIN_ADC3 PINPOS('E', 15)
> > +#define PIN_AUD_AOUTL PINPOS('F', 2)
> > +#define PIN_IIC3_SDA PINPOS('F', 4)
> > +#define PIN_SD1_D2 PINPOS('F', 14)
> > +#define PIN_AUD_AOUTR PINPOS('G', 2)
> > +#define PIN_SD1_D3 PINPOS('G', 13)
> > +#define PIN_SD1_CLK PINPOS('G', 14)
> > +#define PIN_SD1_CMD PINPOS('G', 15)
> > +#define PIN_AUD_AINL_MIC PINPOS('H', 1)
> > +#define PIN_RSTN PINPOS('H', 12)
> > +#define PIN_PWM0_BUCK PINPOS('H', 13)
> > +#define PIN_SD1_D1 PINPOS('H', 14)
> > +#define PIN_SD1_D0 PINPOS('H', 15)
> > +#define PIN_AUD_AINR_MIC PINPOS('J', 1)
> > +#define PIN_IIC2_SCL PINPOS('J', 13)
> > +#define PIN_IIC2_SDA PINPOS('J', 14)
> > +#define PIN_SD0_CD PINPOS('K', 2)
> > +#define PIN_SD0_D1 PINPOS('K', 3)
> > +#define PIN_UART2_RX PINPOS('K', 13)
> > +#define PIN_UART2_CTS PINPOS('K', 14)
> > +#define PIN_UART2_TX PINPOS('K', 15)
> > +#define PIN_SD0_CLK PINPOS('L', 1)
> > +#define PIN_SD0_D0 PINPOS('L', 2)
> > +#define PIN_SD0_CMD PINPOS('L', 3)
> > +#define PIN_CLK32K PINPOS('L', 14)
> > +#define PIN_UART2_RTS PINPOS('L', 15)
> > +#define PIN_SD0_D3 PINPOS('M', 1)
> > +#define PIN_SD0_D2 PINPOS('M', 2)
> > +#define PIN_UART0_RX PINPOS('M', 4)
> > +#define PIN_UART0_TX PINPOS('M', 5)
> > +#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
> > +#define PIN_PWR_ON PINPOS('M', 11)
> > +#define PIN_PWR_GPIO2 PINPOS('M', 12)
> > +#define PIN_PWR_GPIO0 PINPOS('M', 13)
> > +#define PIN_CLK25M PINPOS('M', 14)
> > +#define PIN_SD0_PWR_EN PINPOS('N', 1)
> > +#define PIN_SPK_EN PINPOS('N', 3)
> > +#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
> > +#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
> > +#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
> > +#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
> > +#define PIN_PWR_GPIO1 PINPOS('N', 13)
> > +#define PIN_EMMC_DAT3 PINPOS('P', 1)
> > +#define PIN_EMMC_DAT0 PINPOS('P', 2)
> > +#define PIN_EMMC_DAT2 PINPOS('P', 3)
> > +#define PIN_EMMC_RSTN PINPOS('P', 4)
> > +#define PIN_AUX0 PINPOS('P', 5)
> > +#define PIN_IIC0_SDA PINPOS('P', 6)
> > +#define PIN_PWR_SEQ3 PINPOS('P', 10)
> > +#define PIN_PWR_VBAT_DET PINPOS('P', 11)
> > +#define PIN_PWR_SEQ1 PINPOS('P', 12)
> > +#define PIN_PWR_BUTTON1 PINPOS('P', 13)
> > +#define PIN_EMMC_DAT1 PINPOS('R', 2)
> > +#define PIN_EMMC_CMD PINPOS('R', 3)
> > +#define PIN_EMMC_CLK PINPOS('R', 4)
> > +#define PIN_IIC0_SCL PINPOS('R', 6)
> > +#define PIN_GPIO_ZQ PINPOS('R', 10)
> > +#define PIN_PWR_RSTN PINPOS('R', 11)
> > +#define PIN_PWR_SEQ2 PINPOS('R', 12)
> > +#define PIN_XTAL_XIN PINPOS('R', 13)
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
> > diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2002.h b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> > new file mode 100644
> > index 000000000000..3c36cfa0a550
> > --- /dev/null
> > +++ b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> > @@ -0,0 +1,79 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> > +/*
> > + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> > + *
> > + * This file is generated from vendor pinout definition.
> > + */
> > +
> > +#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
> > +#define _DT_BINDINGS_PINCTRL_SG2002_H
> > +
> > +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> > +
> > +#define PIN_AUD_AINL_MIC 2
> > +#define PIN_AUD_AOUTR 4
> > +#define PIN_SD0_CLK 6
> > +#define PIN_SD0_CMD 7
> > +#define PIN_SD0_D0 8
> > +#define PIN_SD0_D1 10
> > +#define PIN_SD0_D2 11
> > +#define PIN_SD0_D3 12
> > +#define PIN_SD0_CD 14
> > +#define PIN_SD0_PWR_EN 15
> > +#define PIN_SPK_EN 17
> > +#define PIN_UART0_TX 18
> > +#define PIN_UART0_RX 19
> > +#define PIN_EMMC_DAT2 20
> > +#define PIN_EMMC_CLK 21
> > +#define PIN_EMMC_DAT0 22
> > +#define PIN_EMMC_DAT3 23
> > +#define PIN_EMMC_CMD 24
> > +#define PIN_EMMC_DAT1 25
> > +#define PIN_JTAG_CPU_TMS 26
> > +#define PIN_JTAG_CPU_TCK 27
> > +#define PIN_IIC0_SCL 28
> > +#define PIN_IIC0_SDA 29
> > +#define PIN_AUX0 30
> > +#define PIN_GPIO_ZQ 35
> > +#define PIN_PWR_VBAT_DET 38
> > +#define PIN_PWR_RSTN 39
> > +#define PIN_PWR_SEQ1 40
> > +#define PIN_PWR_SEQ2 41
> > +#define PIN_PWR_WAKEUP0 43
> > +#define PIN_PWR_BUTTON1 44
> > +#define PIN_XTAL_XIN 45
> > +#define PIN_PWR_GPIO0 47
> > +#define PIN_PWR_GPIO1 48
> > +#define PIN_PWR_GPIO2 49
> > +#define PIN_SD1_D3 51
> > +#define PIN_SD1_D2 52
> > +#define PIN_SD1_D1 53
> > +#define PIN_SD1_D0 54
> > +#define PIN_SD1_CMD 55
> > +#define PIN_SD1_CLK 56
> > +#define PIN_PWM0_BUCK 58
> > +#define PIN_ADC1 59
> > +#define PIN_USB_VBUS_DET 60
> > +#define PIN_ETH_TXP 62
> > +#define PIN_ETH_TXM 63
> > +#define PIN_ETH_RXP 64
> > +#define PIN_ETH_RXM 65
> > +#define PIN_GPIO_RTX 67
> > +#define PIN_MIPIRX4N 72
> > +#define PIN_MIPIRX4P 73
> > +#define PIN_MIPIRX3N 74
> > +#define PIN_MIPIRX3P 75
> > +#define PIN_MIPIRX2N 76
> > +#define PIN_MIPIRX2P 77
> > +#define PIN_MIPIRX1N 78
> > +#define PIN_MIPIRX1P 79
> > +#define PIN_MIPIRX0N 80
> > +#define PIN_MIPIRX0P 81
> > +#define PIN_MIPI_TXM2 83
> > +#define PIN_MIPI_TXP2 84
> > +#define PIN_MIPI_TXM1 85
> > +#define PIN_MIPI_TXP1 86
> > +#define PIN_MIPI_TXM0 87
> > +#define PIN_MIPI_TXP0 88
> > +
> > +#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
> > --
> > 2.45.2
> >
More information about the linux-riscv
mailing list