[PATCH 1/7] dt-bindings: pinctrl: Add pinctrl for Sophgo CV1800 series SoC.
Rob Herring
robh at kernel.org
Mon Jul 8 09:29:48 PDT 2024
On Thu, Jul 04, 2024 at 01:46:37PM +0800, Inochi Amaoto wrote:
> Add pinctrl support for Sophgo CV1800 series SoC.
>
> Signed-off-by: Inochi Amaoto <inochiama at outlook.com>
> ---
> .../pinctrl/sophgo,cv1800-pinctrl.yaml | 120 +++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-cv1800b.h | 63 +++++++++
> include/dt-bindings/pinctrl/pinctrl-cv1812h.h | 127 ++++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-cv18xx.h | 19 +++
> include/dt-bindings/pinctrl/pinctrl-sg2000.h | 127 ++++++++++++++++++
> include/dt-bindings/pinctrl/pinctrl-sg2002.h | 79 +++++++++++
> 6 files changed, 535 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2000.h
> create mode 100644 include/dt-bindings/pinctrl/pinctrl-sg2002.h
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> new file mode 100644
> index 000000000000..b7e4084b78d6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/sophgo,cv1800-pinctrl.yaml
> @@ -0,0 +1,120 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/sophgo,cv1800-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Sophgo CV1800 Pin Controller
> +
> +maintainers:
> + - Inochi Amaoto <inochiama at outlook.com>
> +
> +properties:
> + compatible:
> + enum:
> + - sophgo,cv1800b-pinctrl
> + - sophgo,cv1812h-pinctrl
> + - sophgo,sg2000-pinctrl
> + - sophgo,sg2002-pinctrl
> +
> + reg:
> + items:
> + - description: pinctrl for system domain
> + - description: pinctrl for rtc domain
Based on the example's addresses, this isn't 1 block, but 2 blocks. Is
this really 1 block, 2 instances of the same block, or 2 different
blocks?
> +
> + reg-names:
> + items:
> + - const: sys
> + - const: rtc
> +
> + resets:
> + maxItems: 1
> +
> +patternProperties:
> + '-cfg$':
> + type: object
> + patternProperties:
> + '-pins$':
> + type: object
> + description: |
> + A pinctrl node should contain at least one subnode representing the
It's the '-cfg' node that 'should contain at least one subnode', not
this node.
> + pinctrl groups available on the machine. Each subnode will list the
> + pins it needs, and how they should be configured, with regard to
> + muxer configuration, bias, input enable/disable, input schmitt
> + trigger enable/disable, slew-rate and drive strength.
> + $ref: /schemas/pinctrl/pincfg-node.yaml
> +
> + properties:
> + pinmux:
> + description: |
> + The list of GPIOs and their mux settings that properties in the
> + node apply to. This should be set using the GPIOMUX or GPIOMUX2
> + macro.
> + $ref: /schemas/pinctrl/pinmux-node.yaml#/properties/pinmux
> +
> + bias-pull-up:
> + type: boolean
> +
> + bias-pull-down:
> + type: boolean
> +
> + drive-strength:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 7
> +
> + input-schmitt:
> + $ref: /schemas/types.yaml#/definitions/uint32
> + minimum: 0
> + maximum: 7
> +
> + slew-rate:
> + enum: [ 0, 1 ]
> +
> + sophgo,bus-holder:
> + description: enable bus holder
> + type: boolean
> +
> + additionalProperties: false
> +
> + additionalProperties: false
In the indented cases, put these before properties or patternProperties.
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/pinctrl/pinctrl-cv1800b.h>
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + pinctrl at 3001000 {
> + compatible = "sophgo,cv1800b-pinctrl";
> + reg = <0x03001000 0x1000>,
> + <0x05027000 0x1000>;
> + reg-names = "sys", "rtc";
> +
> + uart0_cfg: uart0-cfg {
> + uart0-pins {
> + pinmux = <PINMUX(PIN_UART0_TX, 0)>,
> + <PINMUX(PIN_UART0_RX, 0)>;
> + bias-pull-up;
> + drive-strength = <2>;
> + slew-rate = <0>;
> + };
> + };
> + };
> +
> + uart0 {
> + pinctrl-0 = <&uart0_cfg>;
> + pinctrl-names = "default";
Not a complete node. Plus the examples for a provider don't show the
consumer side and vice-versa. So drop the node.
> + };
> + };
> +
> +...
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1800b.h b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> new file mode 100644
> index 000000000000..0593fc33d470
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv1800b.h
> @@ -0,0 +1,63 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV1800B_H
> +#define _DT_BINDINGS_PINCTRL_CV1800B_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PIN_AUD_AOUTR 1
> +#define PIN_SD0_CLK 3
> +#define PIN_SD0_CMD 4
> +#define PIN_SD0_D0 5
> +#define PIN_SD0_D1 7
> +#define PIN_SD0_D2 8
> +#define PIN_SD0_D3 9
> +#define PIN_SD0_CD 11
> +#define PIN_SD0_PWR_EN 12
> +#define PIN_SPK_EN 14
> +#define PIN_UART0_TX 15
> +#define PIN_UART0_RX 16
> +#define PIN_SPINOR_HOLD_X 17
> +#define PIN_SPINOR_SCK 18
> +#define PIN_SPINOR_MOSI 19
> +#define PIN_SPINOR_WP_X 20
> +#define PIN_SPINOR_MISO 21
> +#define PIN_SPINOR_CS_X 22
> +#define PIN_IIC0_SCL 23
> +#define PIN_IIC0_SDA 24
> +#define PIN_AUX0 25
> +#define PIN_PWR_VBAT_DET 30
> +#define PIN_PWR_SEQ2 31
> +#define PIN_XTAL_XIN 33
> +#define PIN_SD1_GPIO0 35
> +#define PIN_SD1_GPIO1 36
> +#define PIN_SD1_D3 38
> +#define PIN_SD1_D2 39
> +#define PIN_SD1_D1 40
> +#define PIN_SD1_D0 41
> +#define PIN_SD1_CMD 42
> +#define PIN_SD1_CLK 43
> +#define PIN_ADC1 44
> +#define PIN_USB_VBUS_DET 45
> +#define PIN_ETH_TXP 47
> +#define PIN_ETH_TXM 48
> +#define PIN_ETH_RXP 49
> +#define PIN_ETH_RXM 50
> +#define PIN_MIPIRX4N 56
> +#define PIN_MIPIRX4P 57
> +#define PIN_MIPIRX3N 58
> +#define PIN_MIPIRX3P 59
> +#define PIN_MIPIRX2N 60
> +#define PIN_MIPIRX2P 61
> +#define PIN_MIPIRX1N 62
> +#define PIN_MIPIRX1P 63
> +#define PIN_MIPIRX0N 64
> +#define PIN_MIPIRX0P 65
> +#define PIN_AUD_AINL_MIC 67
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV1800B_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv1812h.h b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> new file mode 100644
> index 000000000000..2908de347919
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv1812h.h
> @@ -0,0 +1,127 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV1812H_H
> +#define _DT_BINDINGS_PINCTRL_CV1812H_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PINPOS(row, col) \
> + ((((row) - 'A' + 1) << 8) + ((col) - 1))
> +
> +#define PIN_MIPI_TXM4 PINPOS('A', 2)
> +#define PIN_MIPIRX0N PINPOS('A', 4)
> +#define PIN_MIPIRX3P PINPOS('A', 6)
> +#define PIN_MIPIRX4P PINPOS('A', 7)
> +#define PIN_VIVO_D2 PINPOS('A', 9)
> +#define PIN_VIVO_D3 PINPOS('A', 10)
> +#define PIN_VIVO_D10 PINPOS('A', 12)
> +#define PIN_USB_VBUS_DET PINPOS('A', 13)
> +#define PIN_MIPI_TXP3 PINPOS('B', 1)
> +#define PIN_MIPI_TXM3 PINPOS('B', 2)
> +#define PIN_MIPI_TXP4 PINPOS('B', 3)
> +#define PIN_MIPIRX0P PINPOS('B', 4)
> +#define PIN_MIPIRX1N PINPOS('B', 5)
> +#define PIN_MIPIRX2N PINPOS('B', 6)
> +#define PIN_MIPIRX4N PINPOS('B', 7)
> +#define PIN_MIPIRX5N PINPOS('B', 8)
> +#define PIN_VIVO_D1 PINPOS('B', 9)
> +#define PIN_VIVO_D5 PINPOS('B', 10)
> +#define PIN_VIVO_D7 PINPOS('B', 11)
> +#define PIN_VIVO_D9 PINPOS('B', 12)
> +#define PIN_USB_ID PINPOS('B', 13)
> +#define PIN_ETH_RXM PINPOS('B', 15)
> +#define PIN_MIPI_TXP2 PINPOS('C', 1)
> +#define PIN_MIPI_TXM2 PINPOS('C', 2)
> +#define PIN_CAM_PD0 PINPOS('C', 3)
> +#define PIN_CAM_MCLK0 PINPOS('C', 4)
> +#define PIN_MIPIRX1P PINPOS('C', 5)
> +#define PIN_MIPIRX2P PINPOS('C', 6)
> +#define PIN_MIPIRX3N PINPOS('C', 7)
> +#define PIN_MIPIRX5P PINPOS('C', 8)
> +#define PIN_VIVO_CLK PINPOS('C', 9)
> +#define PIN_VIVO_D6 PINPOS('C', 10)
> +#define PIN_VIVO_D8 PINPOS('C', 11)
> +#define PIN_USB_VBUS_EN PINPOS('C', 12)
> +#define PIN_ETH_RXP PINPOS('C', 14)
> +#define PIN_GPIO_RTX PINPOS('C', 15)
> +#define PIN_MIPI_TXP1 PINPOS('D', 1)
> +#define PIN_MIPI_TXM1 PINPOS('D', 2)
> +#define PIN_CAM_MCLK1 PINPOS('D', 3)
> +#define PIN_IIC3_SCL PINPOS('D', 4)
> +#define PIN_VIVO_D4 PINPOS('D', 10)
> +#define PIN_ETH_TXM PINPOS('D', 14)
> +#define PIN_ETH_TXP PINPOS('D', 15)
> +#define PIN_MIPI_TXP0 PINPOS('E', 1)
> +#define PIN_MIPI_TXM0 PINPOS('E', 2)
> +#define PIN_CAM_PD1 PINPOS('E', 4)
> +#define PIN_CAM_RST0 PINPOS('E', 5)
> +#define PIN_VIVO_D0 PINPOS('E', 10)
> +#define PIN_ADC1 PINPOS('E', 13)
> +#define PIN_ADC2 PINPOS('E', 14)
> +#define PIN_ADC3 PINPOS('E', 15)
> +#define PIN_AUD_AOUTL PINPOS('F', 2)
> +#define PIN_IIC3_SDA PINPOS('F', 4)
> +#define PIN_SD1_D2 PINPOS('F', 14)
> +#define PIN_AUD_AOUTR PINPOS('G', 2)
> +#define PIN_SD1_D3 PINPOS('G', 13)
> +#define PIN_SD1_CLK PINPOS('G', 14)
> +#define PIN_SD1_CMD PINPOS('G', 15)
> +#define PIN_AUD_AINL_MIC PINPOS('H', 1)
> +#define PIN_RSTN PINPOS('H', 12)
> +#define PIN_PWM0_BUCK PINPOS('H', 13)
> +#define PIN_SD1_D1 PINPOS('H', 14)
> +#define PIN_SD1_D0 PINPOS('H', 15)
> +#define PIN_AUD_AINR_MIC PINPOS('J', 1)
> +#define PIN_IIC2_SCL PINPOS('J', 13)
> +#define PIN_IIC2_SDA PINPOS('J', 14)
> +#define PIN_SD0_CD PINPOS('K', 2)
> +#define PIN_SD0_D1 PINPOS('K', 3)
> +#define PIN_UART2_RX PINPOS('K', 13)
> +#define PIN_UART2_CTS PINPOS('K', 14)
> +#define PIN_UART2_TX PINPOS('K', 15)
> +#define PIN_SD0_CLK PINPOS('L', 1)
> +#define PIN_SD0_D0 PINPOS('L', 2)
> +#define PIN_SD0_CMD PINPOS('L', 3)
> +#define PIN_CLK32K PINPOS('L', 14)
> +#define PIN_UART2_RTS PINPOS('L', 15)
> +#define PIN_SD0_D3 PINPOS('M', 1)
> +#define PIN_SD0_D2 PINPOS('M', 2)
> +#define PIN_UART0_RX PINPOS('M', 4)
> +#define PIN_UART0_TX PINPOS('M', 5)
> +#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
> +#define PIN_PWR_ON PINPOS('M', 11)
> +#define PIN_PWR_GPIO2 PINPOS('M', 12)
> +#define PIN_PWR_GPIO0 PINPOS('M', 13)
> +#define PIN_CLK25M PINPOS('M', 14)
> +#define PIN_SD0_PWR_EN PINPOS('N', 1)
> +#define PIN_SPK_EN PINPOS('N', 3)
> +#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
> +#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
> +#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
> +#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
> +#define PIN_PWR_GPIO1 PINPOS('N', 13)
> +#define PIN_EMMC_DAT3 PINPOS('P', 1)
> +#define PIN_EMMC_DAT0 PINPOS('P', 2)
> +#define PIN_EMMC_DAT2 PINPOS('P', 3)
> +#define PIN_EMMC_RSTN PINPOS('P', 4)
> +#define PIN_AUX0 PINPOS('P', 5)
> +#define PIN_IIC0_SDA PINPOS('P', 6)
> +#define PIN_PWR_SEQ3 PINPOS('P', 10)
> +#define PIN_PWR_VBAT_DET PINPOS('P', 11)
> +#define PIN_PWR_SEQ1 PINPOS('P', 12)
> +#define PIN_PWR_BUTTON1 PINPOS('P', 13)
> +#define PIN_EMMC_DAT1 PINPOS('R', 2)
> +#define PIN_EMMC_CMD PINPOS('R', 3)
> +#define PIN_EMMC_CLK PINPOS('R', 4)
> +#define PIN_IIC0_SCL PINPOS('R', 6)
> +#define PIN_GPIO_ZQ PINPOS('R', 10)
> +#define PIN_PWR_RSTN PINPOS('R', 11)
> +#define PIN_PWR_SEQ2 PINPOS('R', 12)
> +#define PIN_XTAL_XIN PINPOS('R', 13)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV1812H_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-cv18xx.h b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> new file mode 100644
> index 000000000000..bc92ad1067ec
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-cv18xx.h
> @@ -0,0 +1,19 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2023 Sophgo Ltd.
> + *
> + * Author: Inochi Amaoto <inochiama at outlook.com>
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_CV18XX_H
> +#define _DT_BINDINGS_PINCTRL_CV18XX_H
> +
> +#define PIN_MUX_INVALD 0xff
> +
> +#define PINMUX2(pin, mux, mux2) \
> + (((pin) & 0xffff) | (((mux) & 0xff) << 16) | (((mux2) & 0xff) << 24))
> +
> +#define PINMUX(pin, mux) \
> + PINMUX2(pin, mux, PIN_MUX_INVALD)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_CV18XX_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2000.h b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> new file mode 100644
> index 000000000000..4871f9a7c6c1
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-sg2000.h
> @@ -0,0 +1,127 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_SG2000_H
> +#define _DT_BINDINGS_PINCTRL_SG2000_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PINPOS(row, col) \
> + ((((row) - 'A' + 1) << 8) + ((col) - 1))
> +
> +#define PIN_MIPI_TXM4 PINPOS('A', 2)
> +#define PIN_MIPIRX0N PINPOS('A', 4)
> +#define PIN_MIPIRX3P PINPOS('A', 6)
> +#define PIN_MIPIRX4P PINPOS('A', 7)
> +#define PIN_VIVO_D2 PINPOS('A', 9)
> +#define PIN_VIVO_D3 PINPOS('A', 10)
> +#define PIN_VIVO_D10 PINPOS('A', 12)
> +#define PIN_USB_VBUS_DET PINPOS('A', 13)
> +#define PIN_MIPI_TXP3 PINPOS('B', 1)
> +#define PIN_MIPI_TXM3 PINPOS('B', 2)
> +#define PIN_MIPI_TXP4 PINPOS('B', 3)
> +#define PIN_MIPIRX0P PINPOS('B', 4)
> +#define PIN_MIPIRX1N PINPOS('B', 5)
> +#define PIN_MIPIRX2N PINPOS('B', 6)
> +#define PIN_MIPIRX4N PINPOS('B', 7)
> +#define PIN_MIPIRX5N PINPOS('B', 8)
> +#define PIN_VIVO_D1 PINPOS('B', 9)
> +#define PIN_VIVO_D5 PINPOS('B', 10)
> +#define PIN_VIVO_D7 PINPOS('B', 11)
> +#define PIN_VIVO_D9 PINPOS('B', 12)
> +#define PIN_USB_ID PINPOS('B', 13)
> +#define PIN_ETH_RXM PINPOS('B', 15)
> +#define PIN_MIPI_TXP2 PINPOS('C', 1)
> +#define PIN_MIPI_TXM2 PINPOS('C', 2)
> +#define PIN_CAM_PD0 PINPOS('C', 3)
> +#define PIN_CAM_MCLK0 PINPOS('C', 4)
> +#define PIN_MIPIRX1P PINPOS('C', 5)
> +#define PIN_MIPIRX2P PINPOS('C', 6)
> +#define PIN_MIPIRX3N PINPOS('C', 7)
> +#define PIN_MIPIRX5P PINPOS('C', 8)
> +#define PIN_VIVO_CLK PINPOS('C', 9)
> +#define PIN_VIVO_D6 PINPOS('C', 10)
> +#define PIN_VIVO_D8 PINPOS('C', 11)
> +#define PIN_USB_VBUS_EN PINPOS('C', 12)
> +#define PIN_ETH_RXP PINPOS('C', 14)
> +#define PIN_GPIO_RTX PINPOS('C', 15)
> +#define PIN_MIPI_TXP1 PINPOS('D', 1)
> +#define PIN_MIPI_TXM1 PINPOS('D', 2)
> +#define PIN_CAM_MCLK1 PINPOS('D', 3)
> +#define PIN_IIC3_SCL PINPOS('D', 4)
> +#define PIN_VIVO_D4 PINPOS('D', 10)
> +#define PIN_ETH_TXM PINPOS('D', 14)
> +#define PIN_ETH_TXP PINPOS('D', 15)
> +#define PIN_MIPI_TXP0 PINPOS('E', 1)
> +#define PIN_MIPI_TXM0 PINPOS('E', 2)
> +#define PIN_CAM_PD1 PINPOS('E', 4)
> +#define PIN_CAM_RST0 PINPOS('E', 5)
> +#define PIN_VIVO_D0 PINPOS('E', 10)
> +#define PIN_ADC1 PINPOS('E', 13)
> +#define PIN_ADC2 PINPOS('E', 14)
> +#define PIN_ADC3 PINPOS('E', 15)
> +#define PIN_AUD_AOUTL PINPOS('F', 2)
> +#define PIN_IIC3_SDA PINPOS('F', 4)
> +#define PIN_SD1_D2 PINPOS('F', 14)
> +#define PIN_AUD_AOUTR PINPOS('G', 2)
> +#define PIN_SD1_D3 PINPOS('G', 13)
> +#define PIN_SD1_CLK PINPOS('G', 14)
> +#define PIN_SD1_CMD PINPOS('G', 15)
> +#define PIN_AUD_AINL_MIC PINPOS('H', 1)
> +#define PIN_RSTN PINPOS('H', 12)
> +#define PIN_PWM0_BUCK PINPOS('H', 13)
> +#define PIN_SD1_D1 PINPOS('H', 14)
> +#define PIN_SD1_D0 PINPOS('H', 15)
> +#define PIN_AUD_AINR_MIC PINPOS('J', 1)
> +#define PIN_IIC2_SCL PINPOS('J', 13)
> +#define PIN_IIC2_SDA PINPOS('J', 14)
> +#define PIN_SD0_CD PINPOS('K', 2)
> +#define PIN_SD0_D1 PINPOS('K', 3)
> +#define PIN_UART2_RX PINPOS('K', 13)
> +#define PIN_UART2_CTS PINPOS('K', 14)
> +#define PIN_UART2_TX PINPOS('K', 15)
> +#define PIN_SD0_CLK PINPOS('L', 1)
> +#define PIN_SD0_D0 PINPOS('L', 2)
> +#define PIN_SD0_CMD PINPOS('L', 3)
> +#define PIN_CLK32K PINPOS('L', 14)
> +#define PIN_UART2_RTS PINPOS('L', 15)
> +#define PIN_SD0_D3 PINPOS('M', 1)
> +#define PIN_SD0_D2 PINPOS('M', 2)
> +#define PIN_UART0_RX PINPOS('M', 4)
> +#define PIN_UART0_TX PINPOS('M', 5)
> +#define PIN_JTAG_CPU_TRST PINPOS('M', 6)
> +#define PIN_PWR_ON PINPOS('M', 11)
> +#define PIN_PWR_GPIO2 PINPOS('M', 12)
> +#define PIN_PWR_GPIO0 PINPOS('M', 13)
> +#define PIN_CLK25M PINPOS('M', 14)
> +#define PIN_SD0_PWR_EN PINPOS('N', 1)
> +#define PIN_SPK_EN PINPOS('N', 3)
> +#define PIN_JTAG_CPU_TCK PINPOS('N', 4)
> +#define PIN_JTAG_CPU_TMS PINPOS('N', 6)
> +#define PIN_PWR_WAKEUP1 PINPOS('N', 11)
> +#define PIN_PWR_WAKEUP0 PINPOS('N', 12)
> +#define PIN_PWR_GPIO1 PINPOS('N', 13)
> +#define PIN_EMMC_DAT3 PINPOS('P', 1)
> +#define PIN_EMMC_DAT0 PINPOS('P', 2)
> +#define PIN_EMMC_DAT2 PINPOS('P', 3)
> +#define PIN_EMMC_RSTN PINPOS('P', 4)
> +#define PIN_AUX0 PINPOS('P', 5)
> +#define PIN_IIC0_SDA PINPOS('P', 6)
> +#define PIN_PWR_SEQ3 PINPOS('P', 10)
> +#define PIN_PWR_VBAT_DET PINPOS('P', 11)
> +#define PIN_PWR_SEQ1 PINPOS('P', 12)
> +#define PIN_PWR_BUTTON1 PINPOS('P', 13)
> +#define PIN_EMMC_DAT1 PINPOS('R', 2)
> +#define PIN_EMMC_CMD PINPOS('R', 3)
> +#define PIN_EMMC_CLK PINPOS('R', 4)
> +#define PIN_IIC0_SCL PINPOS('R', 6)
> +#define PIN_GPIO_ZQ PINPOS('R', 10)
> +#define PIN_PWR_RSTN PINPOS('R', 11)
> +#define PIN_PWR_SEQ2 PINPOS('R', 12)
> +#define PIN_XTAL_XIN PINPOS('R', 13)
> +
> +#endif /* _DT_BINDINGS_PINCTRL_SG2000_H */
> diff --git a/include/dt-bindings/pinctrl/pinctrl-sg2002.h b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> new file mode 100644
> index 000000000000..3c36cfa0a550
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/pinctrl-sg2002.h
> @@ -0,0 +1,79 @@
> +/* SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause */
> +/*
> + * Copyright (C) 2024 Inochi Amaoto <inochiama at outlook.com>
> + *
> + * This file is generated from vendor pinout definition.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_SG2002_H
> +#define _DT_BINDINGS_PINCTRL_SG2002_H
> +
> +#include <dt-bindings/pinctrl/pinctrl-cv18xx.h>
> +
> +#define PIN_AUD_AINL_MIC 2
> +#define PIN_AUD_AOUTR 4
> +#define PIN_SD0_CLK 6
> +#define PIN_SD0_CMD 7
> +#define PIN_SD0_D0 8
> +#define PIN_SD0_D1 10
> +#define PIN_SD0_D2 11
> +#define PIN_SD0_D3 12
> +#define PIN_SD0_CD 14
> +#define PIN_SD0_PWR_EN 15
> +#define PIN_SPK_EN 17
> +#define PIN_UART0_TX 18
> +#define PIN_UART0_RX 19
> +#define PIN_EMMC_DAT2 20
> +#define PIN_EMMC_CLK 21
> +#define PIN_EMMC_DAT0 22
> +#define PIN_EMMC_DAT3 23
> +#define PIN_EMMC_CMD 24
> +#define PIN_EMMC_DAT1 25
> +#define PIN_JTAG_CPU_TMS 26
> +#define PIN_JTAG_CPU_TCK 27
> +#define PIN_IIC0_SCL 28
> +#define PIN_IIC0_SDA 29
> +#define PIN_AUX0 30
> +#define PIN_GPIO_ZQ 35
> +#define PIN_PWR_VBAT_DET 38
> +#define PIN_PWR_RSTN 39
> +#define PIN_PWR_SEQ1 40
> +#define PIN_PWR_SEQ2 41
> +#define PIN_PWR_WAKEUP0 43
> +#define PIN_PWR_BUTTON1 44
> +#define PIN_XTAL_XIN 45
> +#define PIN_PWR_GPIO0 47
> +#define PIN_PWR_GPIO1 48
> +#define PIN_PWR_GPIO2 49
> +#define PIN_SD1_D3 51
> +#define PIN_SD1_D2 52
> +#define PIN_SD1_D1 53
> +#define PIN_SD1_D0 54
> +#define PIN_SD1_CMD 55
> +#define PIN_SD1_CLK 56
> +#define PIN_PWM0_BUCK 58
> +#define PIN_ADC1 59
> +#define PIN_USB_VBUS_DET 60
> +#define PIN_ETH_TXP 62
> +#define PIN_ETH_TXM 63
> +#define PIN_ETH_RXP 64
> +#define PIN_ETH_RXM 65
> +#define PIN_GPIO_RTX 67
> +#define PIN_MIPIRX4N 72
> +#define PIN_MIPIRX4P 73
> +#define PIN_MIPIRX3N 74
> +#define PIN_MIPIRX3P 75
> +#define PIN_MIPIRX2N 76
> +#define PIN_MIPIRX2P 77
> +#define PIN_MIPIRX1N 78
> +#define PIN_MIPIRX1P 79
> +#define PIN_MIPIRX0N 80
> +#define PIN_MIPIRX0P 81
> +#define PIN_MIPI_TXM2 83
> +#define PIN_MIPI_TXP2 84
> +#define PIN_MIPI_TXM1 85
> +#define PIN_MIPI_TXP1 86
> +#define PIN_MIPI_TXM0 87
> +#define PIN_MIPI_TXP0 88
> +
> +#endif /* _DT_BINDINGS_PINCTRL_SG2002_H */
> --
> 2.45.2
>
More information about the linux-riscv
mailing list