[PATCH v5 0/4] Add missing port pins for RZ/Five SoC

[Lad, Prabhakar]

Hi Geert,

On Mon, Jan 15, 2024 at 1:08 PM Prabhakar <prabhakar.csengg at gmail.com> wrote:
>
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
>
> Hi All,
>
> This patch series intends to incorporate the absent port pins P19 to P28,
> which are exclusively available on the RZ/Five SoC.
>
> Cheers,
> Prabhakar
>
> v4 -> v5:
> * Made struct rzg2l_variable_pin_cfg variables u32
> * Updated PIN_CFG_PIN_MAP_MASK macro to use GENMASK_ULL() as reported
>   by kernel test robot.
>
> v3 -> v4:
> * Rebased the changes on top Claudiu's patches
> * patch 1/4 is new patch for using FIELD_PREP_CONST/FIELD_GET as
>   suggested by Geert
> * patch 2/4 adjusted the code again using FIELD_PREP_CONST/FIELD_GET
> * patch 3/4 fixed rzg2l_pinctrl_get_variable_pin_cfg() as pointed by Geert
> * patch 4/4 is unchanged
> * patches 1-3 have been boot tested on g2l family
>
> v2->v3:
> * Fixed build warnings for m68k as reported by Kernel test robot.
>
> RFC -> v2:
> * Fixed review comments pointed by Geert & Biju
>
> RFC:
> Link: https://lore.kernel.org/lkml/20230630120433.49529-3-prabhakar.mahadev-lad.rj@bp.renesas.com/T/
>
>
> Lad Prabhakar (4):
>   pinctrl: renesas: rzg2l: Improve code for readability
>   pinctrl: renesas: rzg2l: Include pinmap in RZG2L_GPIO_PORT_PACK()
>     macro
>   pinctrl: renesas: pinctrl-rzg2l: Add the missing port pins P19 to P28
>   riscv: dts: renesas: r9a07g043f: Update gpio-ranges property
>
>  arch/riscv/boot/dts/renesas/r9a07g043f.dtsi |   4 +
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c     | 284 +++++++++++++++++---
>  2 files changed, 248 insertions(+), 40 deletions(-)
>
With recent changes to pinctrl-rzg2l.c this patch series (patch #2)
does not apply cleanly anymore. Shall I resend it?

Cheers,
Prabhakar