[RFC PATCH 2/6] pinctrl: starfive: jh8100: add pinctrl driver for sys_east domain

[Linus Walleij]

Hi Alex,

thanks for your patch!

On Thu, Dec 21, 2023 at 9:36 AM Alex Soo <yuklin.soo at starfivetech.com> wrote:

> Add pinctrl driver for sys_east domain.

This commit message is wrong, it also contains the main driver for jh8100.
Please add some proper subject and commit message.

> Signed-off-by: Alex Soo <yuklin.soo at starfivetech.com>
> Reviewed-by: Ley Foon Tan <leyfoon.tan at starfivetech.com>
(...)
> +#define pin_to_hwirq(sfp) (((sfp)->wakeup_gpio) - ((sfp)->gc.base))

Please do not reference gc.base like this, it is a gpio internal detail.

Also, turn this into a static inline function, the macro is hard to read.

> +/* pad control bits */
> +#define JH8100_PADCFG_POS      BIT(7)
> +#define JH8100_PADCFG_SMT      BIT(6)
> +#define JH8100_PADCFG_SLEW     BIT(5)
> +#define JH8100_PADCFG_PD       BIT(4)
> +#define JH8100_PADCFG_PU       BIT(3)
> +#define JH8100_PADCFG_BIAS     (JH8100_PADCFG_PD | JH8100_PADCFG_PU)

JH8100_PADCFG_BIAS_MASK

> +#define JH8100_PADCFG_DS_MASK  GENMASK(2, 1)
> +#define JH8100_PADCFG_DS_2MA   (0U << 1)
> +#define JH8100_PADCFG_DS_4MA   BIT(1)
> +#define JH8100_PADCFG_DS_8MA   (2U << 1)
> +#define JH8100_PADCFG_DS_12MA  (3U << 1)

Please use (1U << 1) for 4MA, this looks weird otherwise.

> +static const struct pinconf_ops jh8100_pinconf_ops = {
> +       .pin_config_get         = jh8100_pinconf_get,
> +       .pin_config_group_get   = jh8100_pinconf_group_get,
> +       .pin_config_group_set   = jh8100_pinconf_group_set,
> +       .pin_config_dbg_show    = jh8100_pinconf_dbg_show,
> +       .is_generic             = true,
> +};
> +
> +static int jh8100_gpio_request(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       return pinctrl_gpio_request(gc, gpio);
> +}
> +
> +static void jh8100_gpio_free(struct gpio_chip *gc, unsigned int gpio)
> +{
> +       pinctrl_gpio_free(gc, gpio);
> +}

Skip one level of indirection, just add pinctrl_gpio_request/free directly
into the vtable.

> +static int jh8100_gpio_set_config(struct gpio_chip *gc,
> +                                 unsigned int gpio, unsigned long config)
> +{
> +       struct jh8100_pinctrl *sfp = container_of(gc,
> +                       struct jh8100_pinctrl, gc);
> +       u32 arg = pinconf_to_config_argument(config);

Please don't reimplement .set_config, just call into the pinctrl
backend using

.set_config = gpiochip_generic_config

> +static int jh8100_gpio_add_pin_ranges(struct gpio_chip *gc)
> +{
> +       struct jh8100_pinctrl *sfp = container_of(gc,
> +                       struct jh8100_pinctrl, gc);
> +
> +       sfp->gpios.name = sfp->gc.label;
> +       sfp->gpios.base = sfp->gc.base;
> +       sfp->gpios.pin_base = 0;
> +       sfp->gpios.npins = sfp->gc.ngpio;
> +       sfp->gpios.gc = &sfp->gc;
> +       pinctrl_add_gpio_range(sfp->pctl, &sfp->gpios);
> +       return 0;
> +}

Why are you not putting the ranges into the device tree where the
GPIO core will add them for you?

> +       if (info->irq_reg) {
> +               jh8100_irq_chip.name = sfp->gc.label;

That's not immutable. The struct should be const.
You have to use .irq_print_chip in the irq_chip.

> +               gpio_irq_chip_set_chip(&sfp->gc.irq, &jh8100_irq_chip);

Use the convention:

struct gpio_irq_chip *girq;

girq = &chip->irq;
gpio_irq_chip_set_chip(girq, &nmk_irq_chip);

... and use girq-> in the rest of the assignments.

> +               dev_info(dev, "StarFive GPIO chip registered %d GPIOs\n", sfp->gc.ngpio);

StarFive JH8100 (be precise)

Yours,
Linus Walleij