[PATCH V2 1/3] riscv: Add Zicbop instruction definitions & cpufeature
Andrew Jones
ajones at ventanamicro.com
Thu Jan 11 02:45:47 PST 2024
On Thu, Jan 11, 2024 at 11:31:32AM +0100, Clément Léger wrote:
>
>
> On 03/01/2024 13:00, Andrew Jones wrote:
> > On Wed, Jan 03, 2024 at 10:31:37AM +0100, Clément Léger wrote:
> >>
> >>
> >> On 31/12/2023 09:29, guoren at kernel.org wrote:
> >>> From: Guo Ren <guoren at linux.alibaba.com>
> >>>
> >>> Cache-block prefetch instructions are HINTs to the hardware to
> >>> indicate that software intends to perform a particular type of
> >>> memory access in the near future. This patch adds prefetch.i,
> >>> prefetch.r and prefetch.w instruction definitions by
> >>> RISCV_ISA_EXT_ZICBOP cpufeature.
> >>>
> >>> Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
> >>> Signed-off-by: Guo Ren <guoren at kernel.org>
> >>> ---
> >>> arch/riscv/Kconfig | 15 ++++++++
> >>> arch/riscv/include/asm/hwcap.h | 1 +
> >>> arch/riscv/include/asm/insn-def.h | 60 +++++++++++++++++++++++++++++++
> >>> arch/riscv/kernel/cpufeature.c | 1 +
> >>> 4 files changed, 77 insertions(+)
> >>>
> >>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> >>> index 24c1799e2ec4..fcbd417d65ea 100644
> >>> --- a/arch/riscv/Kconfig
> >>> +++ b/arch/riscv/Kconfig
> >>> @@ -579,6 +579,21 @@ config RISCV_ISA_ZICBOZ
> >>>
> >>> If you don't know what to do here, say Y.
> >>>
> >>> +config RISCV_ISA_ZICBOP
> >>> + bool "Zicbop extension support for cache block prefetch"
> >>> + depends on MMU
> >>> + depends on RISCV_ALTERNATIVE
> >>> + default y
> >>> + help
> >>> + Adds support to dynamically detect the presence of the ZICBOP
> >>> + extension (Cache Block Prefetch Operations) and enable its
> >>> + usage.
> >>> +
> >>> + The Zicbop extension can be used to prefetch cache block for
> >>> + read/write fetch.
> >>> +
> >>> + If you don't know what to do here, say Y.
> >>> +
> >>> config TOOLCHAIN_HAS_ZIHINTPAUSE
> >>> bool
> >>> default y
> >>> diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
> >>> index 06d30526ef3b..77d3b6ee25ab 100644
> >>> --- a/arch/riscv/include/asm/hwcap.h
> >>> +++ b/arch/riscv/include/asm/hwcap.h
> >>> @@ -57,6 +57,7 @@
> >>> #define RISCV_ISA_EXT_ZIHPM 42
> >>> #define RISCV_ISA_EXT_SMSTATEEN 43
> >>> #define RISCV_ISA_EXT_ZICOND 44
> >>> +#define RISCV_ISA_EXT_ZICBOP 45
> >>
> >> Hi Guo,
> >>
> >> Since you are adding support for the Zicbop extension, you could
> >> probably also allow to probe it from userspace using hwprobe. Add a few
> >> definitions to sys_riscv.c/hwprobe.h and it will be fine.
> >
> > To expose to userspace, we should also start parsing the block size,
> > so it can also be exposed to userspace. Starting to parse the block
> > size first requires that we decide we need to parse the block size
> > (see [1]).
>
> Hi Andrew, thanks for the thread.
>
> I read it (and the other ones that are related to it) and basically, it
> seems there was a first decision (expose Zicbop block size indivudally)
> due to the fact the specification did not mentioned anything specific
> about clock sizes but then after that, there was a clarification in the
> spec stating that Zicbop and Zicbom have the same block size so the
> first decision was questioned again.
>
> From a user coherency point of view, I think it would make more sense to
> expose it individually in hwprobe so that zicboz, zicbop and zicbom
> have their "own" block size (even though zicbop and zicbom would use the
> same one). Moreover, it would allow us for future evolution easily
> without breaking any userspace later if zicbop and zicbom block size are
> decoupled.
I agree and QEMU has already headed down the road of generating
riscv,cbop-block-size (I guess Conor's ack on [1] was interpreted as
being sufficient to merge the QEMU bits), so we can add the Linux
support and test with QEMU now. The work could probably be a separate
series to this one, though.
Thanks,
drew
>
> Clément
>
> >
> > [1] https://lore.kernel.org/all/20231029123500.739409-1-dbarboza@ventanamicro.com/
> >
> > Thanks,
> > drew
> >
> >
> >>
> >> Thanks,
> >>
> >> Clément
> >>
> >>>
> >>> #define RISCV_ISA_EXT_MAX 64
> >>>
> >>> diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
> >>> index e27179b26086..bbda350a63bf 100644
> >>> --- a/arch/riscv/include/asm/insn-def.h
> >>> +++ b/arch/riscv/include/asm/insn-def.h
> >>> @@ -18,6 +18,13 @@
> >>> #define INSN_I_RD_SHIFT 7
> >>> #define INSN_I_OPCODE_SHIFT 0
> >>>
> >>> +#define INSN_S_SIMM7_SHIFT 25
> >>> +#define INSN_S_RS2_SHIFT 20
> >>> +#define INSN_S_RS1_SHIFT 15
> >>> +#define INSN_S_FUNC3_SHIFT 12
> >>> +#define INSN_S_SIMM5_SHIFT 7
> >>> +#define INSN_S_OPCODE_SHIFT 0
> >>> +
> >>> #ifdef __ASSEMBLY__
> >>>
> >>> #ifdef CONFIG_AS_HAS_INSN
> >>> @@ -30,6 +37,10 @@
> >>> .insn i \opcode, \func3, \rd, \rs1, \simm12
> >>> .endm
> >>>
> >>> + .macro insn_s, opcode, func3, rs2, simm12, rs1
> >>> + .insn s \opcode, \func3, \rs2, \simm12(\rs1)
> >>> + .endm
> >>> +
> >>> #else
> >>>
> >>> #include <asm/gpr-num.h>
> >>> @@ -51,10 +62,20 @@
> >>> (\simm12 << INSN_I_SIMM12_SHIFT))
> >>> .endm
> >>>
> >>> + .macro insn_s, opcode, func3, rs2, simm12, rs1
> >>> + .4byte ((\opcode << INSN_S_OPCODE_SHIFT) | \
> >>> + (\func3 << INSN_S_FUNC3_SHIFT) | \
> >>> + (.L__gpr_num_\rs2 << INSN_S_RS2_SHIFT) | \
> >>> + (.L__gpr_num_\rs1 << INSN_S_RS1_SHIFT) | \
> >>> + ((\simm12 & 0x1f) << INSN_S_SIMM5_SHIFT) | \
> >>> + (((\simm12 >> 5) & 0x7f) << INSN_S_SIMM7_SHIFT))
> >>> + .endm
> >>> +
> >>> #endif
> >>>
> >>> #define __INSN_R(...) insn_r __VA_ARGS__
> >>> #define __INSN_I(...) insn_i __VA_ARGS__
> >>> +#define __INSN_S(...) insn_s __VA_ARGS__
> >>>
> >>> #else /* ! __ASSEMBLY__ */
> >>>
> >>> @@ -66,6 +87,9 @@
> >>> #define __INSN_I(opcode, func3, rd, rs1, simm12) \
> >>> ".insn i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n"
> >>>
> >>> +#define __INSN_S(opcode, func3, rs2, simm12, rs1) \
> >>> + ".insn s " opcode ", " func3 ", " rs2 ", " simm12 "(" rs1 ")\n"
> >>> +
> >>> #else
> >>>
> >>> #include <linux/stringify.h>
> >>> @@ -92,12 +116,26 @@
> >>> " (\\simm12 << " __stringify(INSN_I_SIMM12_SHIFT) "))\n" \
> >>> " .endm\n"
> >>>
> >>> +#define DEFINE_INSN_S \
> >>> + __DEFINE_ASM_GPR_NUMS \
> >>> +" .macro insn_s, opcode, func3, rs2, simm12, rs1\n" \
> >>> +" .4byte ((\\opcode << " __stringify(INSN_S_OPCODE_SHIFT) ") |" \
> >>> +" (\\func3 << " __stringify(INSN_S_FUNC3_SHIFT) ") |" \
> >>> +" (.L__gpr_num_\\rs2 << " __stringify(INSN_S_RS2_SHIFT) ") |" \
> >>> +" (.L__gpr_num_\\rs1 << " __stringify(INSN_S_RS1_SHIFT) ") |" \
> >>> +" ((\\simm12 & 0x1f) << " __stringify(INSN_S_SIMM5_SHIFT) ") |" \
> >>> +" (((\\simm12 >> 5) & 0x7f) << " __stringify(INSN_S_SIMM7_SHIFT) "))\n" \
> >>> +" .endm\n"
> >>> +
> >>> #define UNDEFINE_INSN_R \
> >>> " .purgem insn_r\n"
> >>>
> >>> #define UNDEFINE_INSN_I \
> >>> " .purgem insn_i\n"
> >>>
> >>> +#define UNDEFINE_INSN_S \
> >>> +" .purgem insn_s\n"
> >>> +
> >>> #define __INSN_R(opcode, func3, func7, rd, rs1, rs2) \
> >>> DEFINE_INSN_R \
> >>> "insn_r " opcode ", " func3 ", " func7 ", " rd ", " rs1 ", " rs2 "\n" \
> >>> @@ -108,6 +146,11 @@
> >>> "insn_i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n" \
> >>> UNDEFINE_INSN_I
> >>>
> >>> +#define __INSN_S(opcode, func3, rs2, simm12, rs1) \
> >>> + DEFINE_INSN_S \
> >>> + "insn_s " opcode ", " func3 ", " rs2 ", " simm12 ", " rs1 "\n" \
> >>> + UNDEFINE_INSN_S
> >>> +
> >>> #endif
> >>>
> >>> #endif /* ! __ASSEMBLY__ */
> >>> @@ -120,6 +163,10 @@
> >>> __INSN_I(RV_##opcode, RV_##func3, RV_##rd, \
> >>> RV_##rs1, RV_##simm12)
> >>>
> >>> +#define INSN_S(opcode, func3, rs2, simm12, rs1) \
> >>> + __INSN_S(RV_##opcode, RV_##func3, RV_##rs2, \
> >>> + RV_##simm12, RV_##rs1)
> >>> +
> >>> #define RV_OPCODE(v) __ASM_STR(v)
> >>> #define RV_FUNC3(v) __ASM_STR(v)
> >>> #define RV_FUNC7(v) __ASM_STR(v)
> >>> @@ -133,6 +180,7 @@
> >>> #define RV___RS2(v) __RV_REG(v)
> >>>
> >>> #define RV_OPCODE_MISC_MEM RV_OPCODE(15)
> >>> +#define RV_OPCODE_OP_IMM RV_OPCODE(19)
> >>> #define RV_OPCODE_SYSTEM RV_OPCODE(115)
> >>>
> >>> #define HFENCE_VVMA(vaddr, asid) \
> >>> @@ -196,4 +244,16 @@
> >>> INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0), \
> >>> RS1(base), SIMM12(4))
> >>>
> >>> +#define CBO_PREFETCH_I(base, offset) \
> >>> + INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(0), \
> >>> + SIMM12(offset), RS1(base))
> >>> +
> >>> +#define CBO_PREFETCH_R(base, offset) \
> >>> + INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(1), \
> >>> + SIMM12(offset), RS1(base))
> >>> +
> >>> +#define CBO_PREFETCH_W(base, offset) \
> >>> + INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(3), \
> >>> + SIMM12(offset), RS1(base))
> >>> +
> >>> #endif /* __ASM_INSN_DEF_H */
> >>> diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
> >>> index b3785ffc1570..bdb02b066041 100644
> >>> --- a/arch/riscv/kernel/cpufeature.c
> >>> +++ b/arch/riscv/kernel/cpufeature.c
> >>> @@ -168,6 +168,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
> >>> __RISCV_ISA_EXT_DATA(h, RISCV_ISA_EXT_h),
> >>> __RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM),
> >>> __RISCV_ISA_EXT_DATA(zicboz, RISCV_ISA_EXT_ZICBOZ),
> >>> + __RISCV_ISA_EXT_DATA(zicbop, RISCV_ISA_EXT_ZICBOP),
> >>> __RISCV_ISA_EXT_DATA(zicntr, RISCV_ISA_EXT_ZICNTR),
> >>> __RISCV_ISA_EXT_DATA(zicond, RISCV_ISA_EXT_ZICOND),
> >>> __RISCV_ISA_EXT_DATA(zicsr, RISCV_ISA_EXT_ZICSR),
More information about the linux-riscv
mailing list