[PATCH V2 1/3] riscv: Add Zicbop instruction definitions & cpufeature

Clément Léger cleger at rivosinc.com
Thu Jan 11 02:31:32 PST 2024



On 03/01/2024 13:00, Andrew Jones wrote:
> On Wed, Jan 03, 2024 at 10:31:37AM +0100, Clément Léger wrote:
>>
>>
>> On 31/12/2023 09:29, guoren at kernel.org wrote:
>>> From: Guo Ren <guoren at linux.alibaba.com>
>>>
>>> Cache-block prefetch instructions are HINTs to the hardware to
>>> indicate that software intends to perform a particular type of
>>> memory access in the near future. This patch adds prefetch.i,
>>> prefetch.r and prefetch.w instruction definitions by
>>> RISCV_ISA_EXT_ZICBOP cpufeature.
>>>
>>> Signed-off-by: Guo Ren <guoren at linux.alibaba.com>
>>> Signed-off-by: Guo Ren <guoren at kernel.org>
>>> ---
>>>  arch/riscv/Kconfig                | 15 ++++++++
>>>  arch/riscv/include/asm/hwcap.h    |  1 +
>>>  arch/riscv/include/asm/insn-def.h | 60 +++++++++++++++++++++++++++++++
>>>  arch/riscv/kernel/cpufeature.c    |  1 +
>>>  4 files changed, 77 insertions(+)
>>>
>>> diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
>>> index 24c1799e2ec4..fcbd417d65ea 100644
>>> --- a/arch/riscv/Kconfig
>>> +++ b/arch/riscv/Kconfig
>>> @@ -579,6 +579,21 @@ config RISCV_ISA_ZICBOZ
>>>  
>>>  	   If you don't know what to do here, say Y.
>>>  
>>> +config RISCV_ISA_ZICBOP
>>> +	bool "Zicbop extension support for cache block prefetch"
>>> +	depends on MMU
>>> +	depends on RISCV_ALTERNATIVE
>>> +	default y
>>> +	help
>>> +	  Adds support to dynamically detect the presence of the ZICBOP
>>> +	  extension (Cache Block Prefetch Operations) and enable its
>>> +	  usage.
>>> +
>>> +	  The Zicbop extension can be used to prefetch cache block for
>>> +	  read/write fetch.
>>> +
>>> +	  If you don't know what to do here, say Y.
>>> +
>>>  config TOOLCHAIN_HAS_ZIHINTPAUSE
>>>  	bool
>>>  	default y
>>> diff --git a/arch/riscv/include/asm/hwcap.h b/arch/riscv/include/asm/hwcap.h
>>> index 06d30526ef3b..77d3b6ee25ab 100644
>>> --- a/arch/riscv/include/asm/hwcap.h
>>> +++ b/arch/riscv/include/asm/hwcap.h
>>> @@ -57,6 +57,7 @@
>>>  #define RISCV_ISA_EXT_ZIHPM		42
>>>  #define RISCV_ISA_EXT_SMSTATEEN		43
>>>  #define RISCV_ISA_EXT_ZICOND		44
>>> +#define RISCV_ISA_EXT_ZICBOP		45
>>
>> Hi Guo,
>>
>> Since you are adding support for the Zicbop extension, you could
>> probably also allow to probe it from userspace using hwprobe. Add a few
>> definitions to sys_riscv.c/hwprobe.h and it will be fine.
> 
> To expose to userspace, we should also start parsing the block size,
> so it can also be exposed to userspace. Starting to parse the block
> size first requires that we decide we need to parse the block size
> (see [1]).

Hi Andrew, thanks for the thread.

I read it (and the other ones that are related to it) and basically, it
seems there was a first decision (expose Zicbop block size indivudally)
due to the fact the specification did not mentioned anything specific
about clock sizes  but then after that, there was a clarification in the
spec stating that Zicbop and Zicbom have the same block size so the
first decision was questioned again.

>From a user coherency point of view, I think it would make more sense to
expose it individually in hwprobe  so that zicboz, zicbop and zicbom
have their "own" block size (even though zicbop and zicbom would use the
same one). Moreover, it would allow us for future evolution easily
without breaking any userspace later if zicbop and zicbom block size are
decoupled.

Clément

> 
> [1] https://lore.kernel.org/all/20231029123500.739409-1-dbarboza@ventanamicro.com/
> 
> Thanks,
> drew
> 
> 
>>
>> Thanks,
>>
>> Clément
>>
>>>  
>>>  #define RISCV_ISA_EXT_MAX		64
>>>  
>>> diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
>>> index e27179b26086..bbda350a63bf 100644
>>> --- a/arch/riscv/include/asm/insn-def.h
>>> +++ b/arch/riscv/include/asm/insn-def.h
>>> @@ -18,6 +18,13 @@
>>>  #define INSN_I_RD_SHIFT			 7
>>>  #define INSN_I_OPCODE_SHIFT		 0
>>>  
>>> +#define INSN_S_SIMM7_SHIFT		25
>>> +#define INSN_S_RS2_SHIFT		20
>>> +#define INSN_S_RS1_SHIFT		15
>>> +#define INSN_S_FUNC3_SHIFT		12
>>> +#define INSN_S_SIMM5_SHIFT		 7
>>> +#define INSN_S_OPCODE_SHIFT		 0
>>> +
>>>  #ifdef __ASSEMBLY__
>>>  
>>>  #ifdef CONFIG_AS_HAS_INSN
>>> @@ -30,6 +37,10 @@
>>>  	.insn	i \opcode, \func3, \rd, \rs1, \simm12
>>>  	.endm
>>>  
>>> +	.macro insn_s, opcode, func3, rs2, simm12, rs1
>>> +	.insn	s \opcode, \func3, \rs2, \simm12(\rs1)
>>> +	.endm
>>> +
>>>  #else
>>>  
>>>  #include <asm/gpr-num.h>
>>> @@ -51,10 +62,20 @@
>>>  		 (\simm12 << INSN_I_SIMM12_SHIFT))
>>>  	.endm
>>>  
>>> +	.macro insn_s, opcode, func3, rs2, simm12, rs1
>>> +	.4byte	((\opcode << INSN_S_OPCODE_SHIFT) |		\
>>> +		 (\func3 << INSN_S_FUNC3_SHIFT) |		\
>>> +		 (.L__gpr_num_\rs2 << INSN_S_RS2_SHIFT) |	\
>>> +		 (.L__gpr_num_\rs1 << INSN_S_RS1_SHIFT) |	\
>>> +		 ((\simm12 & 0x1f) << INSN_S_SIMM5_SHIFT) |	\
>>> +		 (((\simm12 >> 5) & 0x7f) << INSN_S_SIMM7_SHIFT))
>>> +	.endm
>>> +
>>>  #endif
>>>  
>>>  #define __INSN_R(...)	insn_r __VA_ARGS__
>>>  #define __INSN_I(...)	insn_i __VA_ARGS__
>>> +#define __INSN_S(...)	insn_s __VA_ARGS__
>>>  
>>>  #else /* ! __ASSEMBLY__ */
>>>  
>>> @@ -66,6 +87,9 @@
>>>  #define __INSN_I(opcode, func3, rd, rs1, simm12)	\
>>>  	".insn	i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n"
>>>  
>>> +#define __INSN_S(opcode, func3, rs2, simm12, rs1)	\
>>> +	".insn	s " opcode ", " func3 ", " rs2 ", " simm12 "(" rs1 ")\n"
>>> +
>>>  #else
>>>  
>>>  #include <linux/stringify.h>
>>> @@ -92,12 +116,26 @@
>>>  "		 (\\simm12 << " __stringify(INSN_I_SIMM12_SHIFT) "))\n"	\
>>>  "	.endm\n"
>>>  
>>> +#define DEFINE_INSN_S							\
>>> +	__DEFINE_ASM_GPR_NUMS						\
>>> +"	.macro insn_s, opcode, func3, rs2, simm12, rs1\n"		\
>>> +"	.4byte	((\\opcode << " __stringify(INSN_S_OPCODE_SHIFT) ") |"	\
>>> +"		 (\\func3 << " __stringify(INSN_S_FUNC3_SHIFT) ") |"	\
>>> +"		 (.L__gpr_num_\\rs2 << " __stringify(INSN_S_RS2_SHIFT) ") |" \
>>> +"		 (.L__gpr_num_\\rs1 << " __stringify(INSN_S_RS1_SHIFT) ") |" \
>>> +"		 ((\\simm12 & 0x1f) << " __stringify(INSN_S_SIMM5_SHIFT) ") |" \
>>> +"		 (((\\simm12 >> 5) & 0x7f) << " __stringify(INSN_S_SIMM7_SHIFT) "))\n" \
>>> +"	.endm\n"
>>> +
>>>  #define UNDEFINE_INSN_R							\
>>>  "	.purgem insn_r\n"
>>>  
>>>  #define UNDEFINE_INSN_I							\
>>>  "	.purgem insn_i\n"
>>>  
>>> +#define UNDEFINE_INSN_S							\
>>> +"	.purgem insn_s\n"
>>> +
>>>  #define __INSN_R(opcode, func3, func7, rd, rs1, rs2)			\
>>>  	DEFINE_INSN_R							\
>>>  	"insn_r " opcode ", " func3 ", " func7 ", " rd ", " rs1 ", " rs2 "\n" \
>>> @@ -108,6 +146,11 @@
>>>  	"insn_i " opcode ", " func3 ", " rd ", " rs1 ", " simm12 "\n" \
>>>  	UNDEFINE_INSN_I
>>>  
>>> +#define __INSN_S(opcode, func3, rs2, simm12, rs1)			\
>>> +	DEFINE_INSN_S							\
>>> +	"insn_s " opcode ", " func3 ", " rs2 ", " simm12 ", " rs1 "\n"	\
>>> +	UNDEFINE_INSN_S
>>> +
>>>  #endif
>>>  
>>>  #endif /* ! __ASSEMBLY__ */
>>> @@ -120,6 +163,10 @@
>>>  	__INSN_I(RV_##opcode, RV_##func3, RV_##rd,		\
>>>  		 RV_##rs1, RV_##simm12)
>>>  
>>> +#define INSN_S(opcode, func3, rs2, simm12, rs1)			\
>>> +	__INSN_S(RV_##opcode, RV_##func3, RV_##rs2,		\
>>> +		 RV_##simm12, RV_##rs1)
>>> +
>>>  #define RV_OPCODE(v)		__ASM_STR(v)
>>>  #define RV_FUNC3(v)		__ASM_STR(v)
>>>  #define RV_FUNC7(v)		__ASM_STR(v)
>>> @@ -133,6 +180,7 @@
>>>  #define RV___RS2(v)		__RV_REG(v)
>>>  
>>>  #define RV_OPCODE_MISC_MEM	RV_OPCODE(15)
>>> +#define RV_OPCODE_OP_IMM	RV_OPCODE(19)
>>>  #define RV_OPCODE_SYSTEM	RV_OPCODE(115)
>>>  
>>>  #define HFENCE_VVMA(vaddr, asid)				\
>>> @@ -196,4 +244,16 @@
>>>  	INSN_I(OPCODE_MISC_MEM, FUNC3(2), __RD(0),		\
>>>  	       RS1(base), SIMM12(4))
>>>  
>>> +#define CBO_PREFETCH_I(base, offset)				\
>>> +	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(0),		\
>>> +	       SIMM12(offset), RS1(base))
>>> +
>>> +#define CBO_PREFETCH_R(base, offset)				\
>>> +	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(1),		\
>>> +	       SIMM12(offset), RS1(base))
>>> +
>>> +#define CBO_PREFETCH_W(base, offset)				\
>>> +	INSN_S(OPCODE_OP_IMM, FUNC3(6), __RS2(3),		\
>>> +	       SIMM12(offset), RS1(base))
>>> +
>>>  #endif /* __ASM_INSN_DEF_H */
>>> diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
>>> index b3785ffc1570..bdb02b066041 100644
>>> --- a/arch/riscv/kernel/cpufeature.c
>>> +++ b/arch/riscv/kernel/cpufeature.c
>>> @@ -168,6 +168,7 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
>>>  	__RISCV_ISA_EXT_DATA(h, RISCV_ISA_EXT_h),
>>>  	__RISCV_ISA_EXT_DATA(zicbom, RISCV_ISA_EXT_ZICBOM),
>>>  	__RISCV_ISA_EXT_DATA(zicboz, RISCV_ISA_EXT_ZICBOZ),
>>> +	__RISCV_ISA_EXT_DATA(zicbop, RISCV_ISA_EXT_ZICBOP),
>>>  	__RISCV_ISA_EXT_DATA(zicntr, RISCV_ISA_EXT_ZICNTR),
>>>  	__RISCV_ISA_EXT_DATA(zicond, RISCV_ISA_EXT_ZICOND),
>>>  	__RISCV_ISA_EXT_DATA(zicsr, RISCV_ISA_EXT_ZICSR),



More information about the linux-riscv mailing list