[PATCH 01/17] dt-bindings: clock: r9a07g043-cpg: Add power domain IDs
claudiu beznea
claudiu.beznea at tuxon.dev
Thu Feb 8 07:45:57 PST 2024
Hi, Biju,
On 08.02.2024 16:30, Biju Das wrote:
> Hi Claudiu,
>
> Thanks for the patch.
>
>> -----Original Message-----
>> From: Claudiu <claudiu.beznea at tuxon.dev>
>> Sent: Thursday, February 8, 2024 12:43 PM
>> Subject: [PATCH 01/17] dt-bindings: clock: r9a07g043-cpg: Add power domain
>> IDs
>>
>> From: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>>
>> Add power domain IDs for RZ/G2UL (R9A07G043) SoC.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj at bp.renesas.com>
>> ---
>> include/dt-bindings/clock/r9a07g043-cpg.h | 48 +++++++++++++++++++++++
>> 1 file changed, 48 insertions(+)
>>
>> diff --git a/include/dt-bindings/clock/r9a07g043-cpg.h b/include/dt-
>> bindings/clock/r9a07g043-cpg.h
>> index 77cde8effdc7..eabfeec7ac37 100644
>> --- a/include/dt-bindings/clock/r9a07g043-cpg.h
>> +++ b/include/dt-bindings/clock/r9a07g043-cpg.h
>> @@ -200,5 +200,53 @@
>> #define R9A07G043_AX45MP_CORE0_RESETN 78 /* RZ/Five Only */
>> #define R9A07G043_IAX45_RESETN 79 /* RZ/Five Only */
>>
>> +/* Power domain IDs. */
>> +#define R9A07G043_PD_ALWAYS_ON 0
>> +#define R9A07G043_PD_GIC 1
>> +#define R9A07G043_PD_IA55 2
>> +#define R9A07G043_PD_MHU 3
>> +#define R9A07G043_PD_CORESIGHT 4
>> +#define R9A07G043_PD_SYC 5
>> +#define R9A07G043_PD_DMAC 6
>> +#define R9A07G043_PD_GTM0 7
>> +#define R9A07G043_PD_GTM1 8
>> +#define R9A07G043_PD_GTM2 9
>> +#define R9A07G043_PD_MTU 10
>> +#define R9A07G043_PD_POE3 11
>> +#define R9A07G043_PD_WDT0 12
>> +#define R9A07G043_PD_SPI 13
>> +#define R9A07G043_PD_SDHI0 14
>> +#define R9A07G043_PD_SDHI1 15
>> +#define R9A07G043_PD_ISU 16
>> +#define R9A07G043_PD_CRU 17
>> +#define R9A07G043_PD_LCDC 18
>> +#define R9A07G043_PD_SSI0 19
>> +#define R9A07G043_PD_SSI1 20
>> +#define R9A07G043_PD_SSI2 21
>> +#define R9A07G043_PD_SSI3 22
>> +#define R9A07G043_PD_SRC 23
>> +#define R9A07G043_PD_USB0 24
>> +#define R9A07G043_PD_USB1 25
>> +#define R9A07G043_PD_USB_PHY 26
>> +#define R9A07G043_PD_ETHER0 27
>> +#define R9A07G043_PD_ETHER1 28
>> +#define R9A07G043_PD_I2C0 29
>> +#define R9A07G043_PD_I2C1 30
>> +#define R9A07G043_PD_I2C2 31
>> +#define R9A07G043_PD_I2C3 32
>> +#define R9A07G043_PD_SCIF0 33
>> +#define R9A07G043_PD_SCIF1 34
>> +#define R9A07G043_PD_SCIF2 35
>> +#define R9A07G043_PD_SCIF3 36
>> +#define R9A07G043_PD_SCIF4 37
>> +#define R9A07G043_PD_SCI0 38
>> +#define R9A07G043_PD_SCI1 39
>> +#define R9A07G043_PD_IRDA 40
>> +#define R9A07G043_PD_RSPI0 41
>> +#define R9A07G043_PD_RSPI1 42
>> +#define R9A07G043_PD_RSPI2 43
>> +#define R9A07G043_PD_CANFD 44
>> +#define R9A07G043_PD_ADC 45
>> +#define R9A07G043_PD_TSU 46
>
> Not sure from "Table 42.3 Registers for Module Standby Mode"
>
> Power domain ID has to be based on CPG_BUS_***_MSTOP or CPG_CLKON_***
> As former reduces number of IDs??
If I understand correctly your point here, you want me to describe PM
domain in DT with something like:
power-domains = <&cpg CPG_BUS_X_MSTOP>;
where X={ACPU, PERI_CPU, PERI_CPU2, REG0, REG1} ?
With this, I still see the necessity of a 3rd identifier that will be IP
specific to be able to uniquely match b/w DT description and registered
power domain. FMPOV, this will lead to a more complicated implementation.
We need a unique ID that the pm domain xlate will use to xlate the DT
binding to driver data structures.
Thank you,
Claudiu Beznea
>
> Cheers,
> Biju
>
>
>
More information about the linux-riscv
mailing list