[PATCH 3/5] riscv: dts: renesas: rzfive-smarc: Enable the blocks which were explicitly disabled

Prabhakar prabhakar.csengg at gmail.com
Thu Sep 28 17:07:02 PDT 2023


From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>

Now that noncoherent dma support is added for RZ/Five SoC enable
the IP blocks which were disabled on RZ/Five SMARC. Now with this
patch we get support for the below peripherals:
* DMAC
* SDHI
* USB
* RSPI
* SSI

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
---
 .../boot/dts/renesas/rzfive-smarc-som.dtsi    | 23 --------
 arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi | 56 -------------------
 2 files changed, 79 deletions(-)

diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
index c62debc7ca7e..433ab5c6a626 100644
--- a/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc-som.dtsi
@@ -7,25 +7,8 @@
 
 #include <arm64/renesas/rzg2ul-smarc-som.dtsi>
 
-/ {
-	aliases {
-		/delete-property/ ethernet0;
-		/delete-property/ ethernet1;
-	};
-
-	chosen {
-		bootargs = "ignore_loglevel";
-	};
-};
-
-&dmac {
-	status = "disabled";
-};
-
 #if (!SW_ET0_EN_N)
 &eth0 {
-	status = "disabled";
-
 	phy0: ethernet-phy at 7 {
 		/delete-property/ interrupt-parent;
 		/delete-property/ interrupts;
@@ -34,14 +17,8 @@ phy0: ethernet-phy at 7 {
 #endif
 
 &eth1 {
-	status = "disabled";
-
 	phy1: ethernet-phy at 7 {
 		/delete-property/ interrupt-parent;
 		/delete-property/ interrupts;
 	};
 };
-
-&sdhi0 {
-	status = "disabled";
-};
diff --git a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
index c07a487c4e5a..a8573fdfd8b1 100644
--- a/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
+++ b/arch/riscv/boot/dts/renesas/rzfive-smarc.dtsi
@@ -6,59 +6,3 @@
  */
 
 #include <arm64/renesas/rzg2ul-smarc.dtsi>
-
-&ehci0 {
-	status = "disabled";
-};
-
-&ehci1 {
-	status = "disabled";
-};
-
-&hsusb {
-	status = "disabled";
-};
-
-&ohci0 {
-	status = "disabled";
-};
-
-&ohci1 {
-	status = "disabled";
-};
-
-&phyrst {
-	status = "disabled";
-};
-
-&sdhi1 {
-	status = "disabled";
-};
-
-&snd_rzg2l {
-	status = "disabled";
-};
-
-&spi1 {
-	status = "disabled";
-};
-
-&ssi1 {
-	status = "disabled";
-};
-
-&usb0_vbus_otg {
-	status = "disabled";
-};
-
-&usb2_phy0 {
-	status = "disabled";
-};
-
-&usb2_phy1 {
-	status = "disabled";
-};
-
-&vccq_sdhi1 {
-	status = "disabled";
-};
-- 
2.34.1




More information about the linux-riscv mailing list