[PATCH v7 0/4] riscv: Add fine-tuned checksum functions

[Charlie Jenkins]

Each architecture generally implements fine-tuned checksum functions to
leverage the instruction set. This patch adds the main checksum
functions that are used in networking.

Vector support is included in this patch to start a discussion on that,
it can probably be optimized more. The vector patches still need some
work as they rely on GCC vector intrinsics types which cannot work in
the kernel since it requires C vector support rather than just assembler
support. I have tested the vector patches as standalone algorithms in QEMU.

This patch takes heavy use of the Zbb extension using alternatives
patching.

To test this patch, enable the configs for KUNIT, then CHECKSUM_KUNIT
and RISCV_CHECKSUM_KUNIT.

I have attempted to make these functions as optimal as possible, but I
have not ran anything on actual riscv hardware. My performance testing
has been limited to inspecting the assembly, running the algorithms on
x86 hardware, and running in QEMU.

ip_fast_csum is a relatively small function so even though it is
possible to read 64 bits at a time on compatible hardware, the
bottleneck becomes the clean up and setup code so loading 32 bits at a
time is actually faster.

---
    
The algorithm proposed to replace the default csum_fold can be seen to
compute the same result by running all 2^32 possible inputs.
    
static inline unsigned int ror32(unsigned int word, unsigned int shift)
{
	return (word >> (shift & 31)) | (word << ((-shift) & 31));
}

unsigned short csum_fold(unsigned int csum)
{
	unsigned int sum = csum;
	sum = (sum & 0xffff) + (sum >> 16);
	sum = (sum & 0xffff) + (sum >> 16);
	return ~sum;
}

unsigned short csum_fold_arc(unsigned int csum)
{
	return ((~csum - ror32(csum, 16)) >> 16);
}

int main()
{
	unsigned int start = 0x0;
	do {
		if (csum_fold(start) != csum_fold_arc(start)) {
			printf("Not the same %u\n", start);
			return -1;
		}
		start += 1;
	} while(start != 0x0);
	printf("The same\n");
	return 0;
}

Cc: Paul Walmsley <paul.walmsley at sifive.com>
Cc: Albert Ou <aou at eecs.berkeley.edu>
Cc: Arnd Bergmann <arnd at arndb.de>
To: Charlie Jenkins <charlie at rivosinc.com>
To: Palmer Dabbelt <palmer at dabbelt.com>
To: Conor Dooley <conor at kernel.org>
To: Samuel Holland <samuel.holland at sifive.com>
To: David Laight <David.Laight at aculab.com>
To: linux-riscv at lists.infradead.org
To: linux-kernel at vger.kernel.org
To: linux-arch at vger.kernel.org
Signed-off-by: Charlie Jenkins <charlie at rivosinc.com>

---
Changes in v7:
- Included linux/bitops.h in asm-generic/checksum.h to use ror (Conor)
- Optimized loop in do_csum (David)
- Used ror instead of shifting (David)
- Unfortunately had to reintroduce ifdefs because gcc is not smart
  enough to not throw warnings on code that will never execute
- Use ifdef instead of IS_ENABLED on __LITTLE_ENDIAN because IS_ENABLED
  does not work on that
- Only optimize for zbb when alternatives is enabled in do_csum
- Link to v6: https://lore.kernel.org/r/20230915-optimize_checksum-v6-0-14a6cf61c618@rivosinc.com

Changes in v6:
- Fix accuracy of commit message for csum_fold
- Fix indentation
- Link to v5: https://lore.kernel.org/r/20230914-optimize_checksum-v5-0-c95b82a2757e@rivosinc.com

Changes in v5:
- Drop vector patches
- Check ZBB enabled before doing any ZBB code (Conor)
- Check endianness in IS_ENABLED
- Revert to the simpler non-tree based version of ipv6_csum_magic since
  David pointed out that the tree based version is not better.
- Link to v4: https://lore.kernel.org/r/20230911-optimize_checksum-v4-0-77cc2ad9e9d7@rivosinc.com

Changes in v4:
- Suggestion by David Laight to use an improved checksum used in
  arch/arc.
- Eliminates zero-extension on rv32, but not on rv64.
- Reduces data dependency which should improve execution speed on
  rv32 and rv64
- Still passes CHECKSUM_KUNIT and RISCV_CHECKSUM_KUNIT on rv32 and
  rv64 with and without zbb.
- Link to v3: https://lore.kernel.org/r/20230907-optimize_checksum-v3-0-c502d34d9d73@rivosinc.com

Changes in v3:
- Use riscv_has_extension_likely and has_vector where possible (Conor)
- Reduce ifdefs by using IS_ENABLED where possible (Conor)
- Use kernel_vector_begin in the vector code (Samuel)
- Link to v2: https://lore.kernel.org/r/20230905-optimize_checksum-v2-0-ccd658db743b@rivosinc.com

Changes in v2:
- After more benchmarking, rework functions to improve performance.
- Remove tests that overlapped with the already existing checksum
  tests and make tests more extensive.
- Use alternatives to activate code with Zbb and vector extensions
- Link to v1: https://lore.kernel.org/r/20230826-optimize_checksum-v1-0-937501b4522a@rivosinc.com

---
Charlie Jenkins (4):
      asm-generic: Improve csum_fold
      riscv: Checksum header
      riscv: Add checksum library
      riscv: Test checksum functions

 arch/riscv/Kconfig.debug              |   1 +
 arch/riscv/include/asm/checksum.h     |  91 ++++++++++
 arch/riscv/lib/Kconfig.debug          |  31 ++++
 arch/riscv/lib/Makefile               |   3 +
 arch/riscv/lib/csum.c                 | 217 ++++++++++++++++++++++
 arch/riscv/lib/riscv_checksum_kunit.c | 330 ++++++++++++++++++++++++++++++++++
 include/asm-generic/checksum.h        |   6 +-
 7 files changed, 676 insertions(+), 3 deletions(-)
---
base-commit: da5f5b0f1b813dafe9ce81b70fed01b0d103d556
change-id: 20230804-optimize_checksum-db145288ac21
-- 
- Charlie